Delve into the world of graphics and game development. Discuss creating stunning visuals, optimizing game mechanics, and share resources for game developers.

All subtopics
Posts under Graphics & Games topic

Post

Replies

Boosts

Views

Activity

Reality Composer Pro 2.0 shader graphs can't be loaded on visionOS 1
Using Reality Composer Pro 2.0, I created a simple shader graph that displays a texture on an unlit surface: On visionOS 2 beta, I can successfully use ShaderGraphMaterial(named:from:in:) to load that shader graph material and assign it to a model entity. However, on visionOS 1.2 and earlier, either in Simulator or on the device, ShaderGraphMaterial(named:from:in:) fails and I see the following logged to the console: If, using Reality Composer Pro 1.0, I experimentally open the same project and delete and recreate exactly the same nodes above, then ShaderGraphMaterial(named:from:in:) works as expected on visionOS 1.2. Is it a known issue that Reality Composer 2 can't be used with visionOS 1? Is this intentional behavior? I've submitted feedback as FB14828873, including a sample project and repro steps. If possible, I would appreciate guidance from an Apple engineer, like "This is a known issue for [list of node types]" or "Reality Composer Pro 2 is not supported for visionOS 1 development, please refer to [documentation]" or "We recommend [workaround]." Thank you.
7
0
1.6k
May ’25
Unity PolySpatia
Hello, We are experiencing an issue with apparent lag or latency when interacting with objects in Unity using the XR Interaction Toolkit. Even when interactables are configured with the Movement Type set to Instantaneous, objects exhibit a noticeable delay when following hand movement. This issue is particularly apparent when the hand moves at higher speeds. We would like to know: is any additional configuration required, or is there something else we need to do to resolve this? Thank you very much for your assistance.
2
0
555
Aug ’25
How to obtain frame rate for iOS proMotion devices
Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?
1
0
163
May ’25
Will OpenGL API and Drivers be removed after appleOS 26?
Hi, I am a Multimedia and Graphics researcher and I am wondering if OpenGL API and drivers will be removed after appleOS 26? macOS 26 iOS 26 iPadOS 26 visionOS 26 I am asking this because most of the libraries I use depends on OpenGL. Like CGAL, libigl, immediate mode ui, nanovg, nanogui, bullet physics. Transitioning from Vulkan and metal while using and learning those libraries is just not viable. I would like to ask you that. I am the sole developer and I just want to ask you that. Regards.
1
0
241
Aug ’25
Highlight or select entity in RealityKit
I'm in the process of converting my SceneKit game to RealityKit. In SceneKit I used to be able to mark nodes as selected by setting SCNMaterial.emission with a custom color. I can do the same with PhysicallyBasedMaterial.emissiveColor, but I'd like to keep my entitities unaffected by the scene lights by using UnlitMaterial. In SceneKit I can set a category mask to indicate what light should affect what node, but there doesn't seem to be such a thing in RealityKit. So at the moment it seems like I have to choose between being able to mark an entity as selected, or having entities unaffected by lighting, but not both. Is there some effect or component I can use to mark entities as selected by applying some coloring regardless of the material used?
2
0
209
Mar ’26
RealityKit Blend Modes
I have 2 planes with textures on. I want these planes to intersect [ –|– ], and I want the blend mode to be additive. Currently I get z fighting on the planes, and I can't see how to set blend modes. I've done this before in Unity and Godot in a fairly straight forward manner. How do I accomplish this with RealityKit, preferably using code only (my scene is quite dynamic)? Do I need to do it with a shader manually? How can I stop the z fighting?
2
0
790
Aug ’25
RealityKit crashes when rendering SpriteKit scene with SKShapeNode in postProcess callback
I'm converting my game from SceneKit to RealityKit. It has a SpriteKit overlay that according to Explore advanced rendering with RealityKit 2 I can add with the code below. The code runs fine if the SKScene only contains a SKSpriteNode (see the commented out line), but when I add a SKShapeNode with a fillColor instead, the app crashes with this error: -[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5970: failed assertion `Draw Errors Validation MTLDepthStencilDescriptor uses frontFaceStencil but MTLRenderPassDescriptor has a nil stencilAttachment texture MTLDepthStencilDescriptor uses backFaceStencil but MTLRenderPassDescriptor has a nil stencilAttachment texture ' I don't know enough about low-level graphics and stencils yet to figure out a quick solution, so I would appreciate if anyone could share an easy fix or explanation of what's wrong. Thanks! class ViewController: NSViewController { var device: MTLDevice! var renderer: SKRenderer! override func loadView() { let arView = ARView(frame: NSScreen.main!.frame) view = arView arView.renderCallbacks.prepareWithDevice = { [weak self] device in guard let self = self else { return } self.device = device renderer = SKRenderer(device: MTLCreateSystemDefaultDevice()!) let scene = SKScene() let shape = SKShapeNode(rectOf: CGSize(width: 10, height: 10)) shape.fillColor = .red scene.addChild(shape) // scene.addChild(SKSpriteNode(color: .red, size: CGSize(width: 10, height: 10))) renderer.scene = scene } arView.renderCallbacks.postProcess = { [weak self] context in guard let self = self else { return } let encoder = context.commandBuffer.makeBlitCommandEncoder() encoder?.copy(from: context.sourceColorTexture, to: context.targetColorTexture) encoder?.endEncoding() renderer.update(atTime: context.time) let descriptor = MTLRenderPassDescriptor() descriptor.colorAttachments[0].loadAction = .load descriptor.colorAttachments[0].storeAction = .store descriptor.colorAttachments[0].texture = context.targetColorTexture renderer.render(withViewport: CGRect(x: 0, y: 0, width: context.targetColorTexture.width, height: context.targetColorTexture.height), commandBuffer: context.commandBuffer, renderPassDescriptor: descriptor) } } }
2
0
973
Mar ’26
Transferring Apps with iCloud KVS
Hi All! I'm being asked to migrate an app which utilizes iCloud KVS (Key Value Storage). This ability is a new-ish feature, and the documentation about this is sparse [1]. Honestly, the entire documentation about the new iCloud transfer functionality seems to be missing. Same with Game Center / GameKit. While the docs say that it should work, I'd like to understand the process in more detail. Has anyone migrated an iCloud KVS app? What happens after the transfer goes through, but before the first release? Do I need to do anything special? I see that the Entitlements file has the TeamID in the Key Value store - is that fine? <key>com.apple.developer.ubiquity-kvstore-identifier</key> <string>$(TeamIdentifierPrefix)$(CFBundleIdentifier)</string> Can someone please share their experience? Thank you! [1] https://aninterestingwebsite.com/help/app-store-connect/transfer-an-app/overview-of-app-transfer
5
0
2.5k
Feb ’26
Warning code: 00000006 will affect background survival
Our APP has integrated 3D function, in order to reduce the memory occupation of the APP in the background, we will uninstall the 3D after the APP enters the background. However, the uninstall also causes problems. When the uninstall process is executed in the background, the app will briefly trigger the background GPU rendering error warning with the error warning code: OGPUMetalError: Insufficient Permission (to submit GPU work from background) (00000006:kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) Execution of the command buffer was aborted due to an error during execution. Insufficient Permission (to submit GPU Work from background) (00000006: kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) excuse me this warning system will tighten APP permissions background?​ For example, limit or shorten the background survival time of the APP. In addition, will the background refresh function fail, resulting in the failure of Bluetooth Ibeacon activation?
2
0
277
Aug ’25
'tangents' was deprecated in visionOS 2.0: Use cp_drawable_compute_projection instead
I'm using a class with tangents to render on RealityKit for VisionOS but in Vision26 it cause a crash on App and there not documentation how implement cp_drawable_compute_projection I have tried a few options but without success. Could you help me to implement it ? The part of code is: return drawable.views.map { view in let userViewpointMatrix = (simdDeviceAnchor * view.transform).inverse let projectionMatrix = ProjectiveTransform3D( leftTangent: Double(view.tangents[0]), rightTangent: Double(view.tangents[1]), topTangent: Double(view.tangents[2]), bottomTangent: Double(view.tangents[3]), nearZ: Double(drawable.depthRange.y), farZ: Double(drawable.depthRange.x), reverseZ: true ) let screenSize = SIMD2(x: Int(view.textureMap.viewport.width), y: Int(view.textureMap.viewport.height)) return ModelRendererViewportDescriptor(viewport: view.textureMap.viewport, projectionMatrix: .init(projectionMatrix), viewMatrix: userViewpointMatrix * translationMatrix * rotationMatrix * scalingMatrix * commonUpCalibration, screenSize: screenSize) }
1
0
168
Jun ’25
Core Text incremental redraw glitch: overlapping glyphs during editing
During editing in Pages (or Word) I am getting these glitches (see attachment). Started after the last update to Mac OS 26.3 (beta) Also removed 2 recent instalments (Blackhole audio driver and kDrive/Infomaniak, but trouble is still there. 27" iMac 2020 (Intel) i7 3,8 Ghz AMD Radeon Pro 5500 XT 8 GB 24 GB RAM macOS Tahoe 26.3 (=beta) Tried restart in safe mode, checked fonts. Talked to aissistent to get a solution, but no ...) Thx for any advice, Pieter (not a developer so please kee pit simple 🙏🏻)
3
0
556
Feb ’26
How to load a USDZ inside of a Reality Composer Pro package as ModelEntity in RealityKit ?
I need a MeshResource from ModelEntity to generate a box collider, but ModelEntity fails to load USDZ files from the Reality Composer Pro (RCP) bundle. This code works for loading an Entity: // Successfully loads as generic Entity previewEntity = try await Entity(named: fileName, in: realityKitContentBundle) But this fails when trying to load as ModelEntity: // Fails to load as ModelEntity modelEntity = try await ModelEntity(named: fileName, in: realityKitContentBundle) I found this thread mentioning: "You'll likely go from USDZ to Entity which contains a MeshResource when you load/init the USDZ file." But it doesn't explain ​how to actually extract the MeshResource. Could anyone advise: How to properly load USDZ files as ModelEntity from RCP bundles? How to extract MeshResource from a successfully loaded Entity? Alternative approaches to generate box colliders if direct extraction isn't possible? Sample code for extraction or workarounds would be greatly appreciated!
1
0
284
Jun ’25
Unable to play .aivu with VideoPlayerComponent
I’m trying to play an Apple Immersive video in the .aivu format using VideoPlayerComponent using the official documentation found here: https://aninterestingwebsite.com/documentation/RealityKit/VideoPlayerComponent Here is a simplified version of the code I'm running in another application: import SwiftUI import RealityKit import AVFoundation struct ImmersiveView: View { var body: some View { RealityView { content in let player = AVPlayer(url: Bundle.main.url(forResource: "Apple_Immersive_Video_Beach", withExtension: "aivu")!) let videoEntity = Entity() var videoPlayerComponent = VideoPlayerComponent(avPlayer: player) videoPlayerComponent.desiredImmersiveViewingMode = .full videoPlayerComponent.desiredViewingMode = .stereo player.play() videoEntity.components.set(videoPlayerComponent) content.add(videoEntity) } } } Full code is here: https://github.com/tomkrikorian/AIVU-VideoPlayerComponentIssueSample But the video does not play in my project even though the file is correct (It can be played in Apple Immersive Video Utility) and I’m getting this error when the app crashes: App VideoPlayer+Component Caption: onComponentDidUpdate Media Type is invalid Domain=SpatialAudioServicesErrorDomain Code=2020631397 "xpc error" UserInfo={NSLocalizedDescription=xpc error} CA_UISoundClient.cpp:436 Got error -4 attempting to SetIntendedSpatialAudioExperience [0x101257490|InputElement #0|Initialize] Number of channels = 0 in AudioChannelLayout does not match number of channels = 2 in stream format. Video I’m using is the official sample that can be found here but tried several different files shot from my clients and the same error are displayed so the issue is definitely not the files but on the RealityKit side of things: https://aninterestingwebsite.com/documentation/immersivemediasupport/authoring-apple-immersive-video Steps to reproduce the issue: - Open AIVUPlayerSample project and run. Look at the logs. All code can be found in ImmersiveView.swift Sample file is included in the project Expected results: If I followed the documentation and samples provided, I should see my video played in full immersive mode inside my ImmersiveSpace. Am i doing something wrong in the code? I'm basically following the documentation here. Feedback ticket: FB19971306
3
0
865
Aug ’25
Request: API to temporarily defer Reachability for fullscreen game swipes (bottom edge)
In swipe-driven games, a first downward swipe starting near the home indicator can trigger Reachability, even when using preferredScreenEdgesDeferringSystemGestures = .bottom and prefersHomeIndicatorAutoHidden = true. This causes the app to slide down to half screen and breaks gameplay. Please consider an API to temporarily defer Reachability while a custom gesture is active (similar to existing system gesture deferral), without disabling accessibility globally. Environment: Devices: iPhones with Home Indicator (Face ID) Why this matters: Bottom-origin swipes are core in many games (flick shots, slingshot, physics toss, bottom sheets). Current workarounds degrade UX and discoverability, and players still accidentally trigger Reachability. Feedback Assistant Post
2
0
675
Aug ’25
CIBumpDistortion filter not working on my view
I'm trying to apply a CIBumpDistortion Core Image filter to a view that contains a UILabel (my storyLabel). The goal is to create a visual bump/magnifying glass effect over the text. However, despite my attempts, the filter doesn't seem to render at all. The view and the label appear as normal, with no distortion effect. I've tried adjusting the filter parameters and reviewing the view hierarchy, but without success. I also haven't been able to find clear documentation or examples for applying this filter to a UIView's layer. // // TVView.swift // Mistery // // Created by Joje on 31/07/25. // import CoreImage import CoreImage.CIFilterBuiltins import UIKit import AVFoundation final class TVView: UIView { // propriedades animacao texto private var textAnimationTimer: Timer? private var fullTextToAnimate: String = "" private var currentCharIndex: Int = 0 // propriedades video estatica private var player: AVQueuePlayer? private var playerLayer: AVPlayerLayer? private var playerLooper: AVPlayerLooper? var onNextButtonTap: () -> Void = {} // MARK: - Subviews // imagem da TV private(set) lazy var tvImageView: UIImageView = { let imageView = UIImageView() imageView.translatesAutoresizingMaskIntoConstraints = false imageView.image = UIImage(named: "tvFinal") imageView.contentMode = .scaleAspectFit return imageView }() // texto que passa dentro da TV private(set) lazy var storyLabel: UILabel = { let label = UILabel() label.translatesAutoresizingMaskIntoConstraints = false //label.backgroundColor = .gray label.textColor = .red label.font = UIFont(name: "MeltedMonster", size: 30) label.textAlignment = .left label.numberOfLines = 0 label.text = "" return label }() private(set) lazy var nextButton: UIButton = { let button = UIButton(type: .system) button.translatesAutoresizingMaskIntoConstraints = false //button.backgroundColor = .darkGray button.addTarget(self, action: #selector(didPressNextButton), for: .touchUpInside) return button }() // MARK: - Lifecycle override init(frame: CGRect) { super.init(frame: frame) backgroundColor = .black setupVideoPlayer() addSubviews() setupConstraints() } override func layoutSubviews() { super.layoutSubviews() playerLayer?.frame = tvImageView.frame.insetBy(dx: tvImageView.frame.width * 0.05, dy: tvImageView.frame.height * 0.18) setupFisheyeEffect() } private func setupFisheyeEffect() { // cria o filtro guard let filter = CIFilter(name: "CIBumpDistortion") else {return print("erro")} storyLabel.layer.shouldRasterize = true storyLabel.layer.rasterizationScale = UIScreen.main.scale // define os parametros filter.setDefaults() // centro do efeito let center = CIVector(x: storyLabel.bounds.midX, y: storyLabel.bounds.midY) filter.setValue(center, forKey: kCIInputCenterKey) // raio de distorção filter.setValue(storyLabel.bounds.width, forKey: kCIInputRadiusKey) // intensidade de distorção filter.setValue(7, forKey: kCIInputScaleKey) storyLabel.layer.filters = [filter] } required init?(coder: NSCoder) { fatalError("init(coder:) has not been implemented") } // MARK: - Button actions @objc private func didPressNextButton() { onNextButtonTap() } @objc private func animateNextCharacter() { guard currentCharIndex < fullTextToAnimate.count else { textAnimationTimer?.invalidate() return } let currentTextIndex = fullTextToAnimate.index(fullTextToAnimate.startIndex, offsetBy: currentCharIndex) let partialText = String(fullTextToAnimate[...currentTextIndex]) storyLabel.text = partialText currentCharIndex += 1 } public func updateStoryText(with text: String) { textAnimationTimer?.invalidate() storyLabel.text = "" fullTextToAnimate = text currentCharIndex = 0 textAnimationTimer = Timer.scheduledTimer(timeInterval: 0.12, target: self, selector: #selector(animateNextCharacter), userInfo: nil, repeats: true) } // MARK: - Setup methods private func setupVideoPlayer() { guard let videoURL = Bundle.main.url(forResource: "static-video", withExtension: "mov") else { print("Erro: Não foi possível encontrar o arquivo de vídeo static-video.mov") return } let playerItem = AVPlayerItem(url: videoURL) player = AVQueuePlayer(playerItem: playerItem) // LINHA COM POSSIVEL ERRO playerLooper = AVPlayerLooper(player: player!, templateItem: playerItem) playerLayer = AVPlayerLayer(player: player) playerLayer?.videoGravity = .resizeAspectFill if let layer = playerLayer { self.layer.addSublayer(layer) } player?.play() } private func addSubviews() { self.addSubview(storyLabel) self.addSubview(tvImageView) self.addSubview(nextButton) } private func setupConstraints() { NSLayoutConstraint.activate([ // TV Image tvImageView.centerXAnchor.constraint(equalTo: centerXAnchor), tvImageView.centerYAnchor.constraint(equalTo: centerYAnchor), tvImageView.widthAnchor.constraint(equalTo: widthAnchor), // TV Text storyLabel.centerXAnchor.constraint(equalTo: tvImageView.centerXAnchor, constant: -50), storyLabel.centerYAnchor.constraint(equalTo: tvImageView.centerYAnchor, constant: -25), storyLabel.widthAnchor.constraint(equalTo: tvImageView.widthAnchor, multiplier: 0.35), storyLabel.heightAnchor.constraint(equalTo: tvImageView.heightAnchor, multiplier: 0.42), //TV Button nextButton.topAnchor.constraint(equalTo: tvImageView.centerYAnchor, constant: -25), nextButton.centerXAnchor.constraint(equalTo: self.centerXAnchor, constant: 190), nextButton.widthAnchor.constraint(equalToConstant: 100), nextButton.heightAnchor.constraint(equalToConstant: 160) ]) } } #Preview{ ViewController() }
3
0
194
Sep ’25
Metal 4: Proper usage of requestResidency() with unique per-frame textures at 120fps
Hello, I have some confusion regarding ResidencySet. Specifically, about the requestResidency() function: how often should we call it? I have a captureOutput(_:didOutput:from:) method that is triggered at 60 or 120 fps. Inside this method, I am calling the following code every frame: computeResidencySet.removeAllAllocations() сomputeResidencySet.addAllocation(TextureA) computeResidencySet.addAllocation(TextureB) computeResidencySet.addAllocation(TextureC) computeResidencySet.commit() computeResidencySet.requestResidency() // Should we call it every frame? Please keep in mind that TextureA, TextureB, and TextureC are unique for each call (new instances are provided on every frame)."
1
0
619
Jan ’26
GKLeaderboard.LoadLeaderboards() return empty when testing on Xcode with local gamekit file (Unity)
var allLeaderboards = await GKLeaderboard.LoadLeaderboards(); Log(allLeaderboards.Count); // returns 0 What am I missing?? What doesn’t work: await GKGameActivityDefinition.LoadGameActivityDefinitions() → count = 0 await GKLeaderboard.LoadLeaderboards() (no args) → 0 leaderboards await GKLeaderboard.LoadLeaderboards("MY ID") → returns 0 GkGameActivity.SetScoreOnLeaderboard(Leaderboard, score, context); returns an error since my Leaderboard is null. Activities and leaderboards are defined in GameCenterResources.gamekit in Xcode. Achievements that I add locally in the .gamekit file do not appear at runtime either; only ASC live ones show. ** What works:** xcode- debug- Gamekit- Manage Game progress- I can submit new scores with the plus button and see the notification on my device. await GKLocalPlayer.Authenticate() succeeds. await GKAchievement.LoadAchievements() returns the list of achievements configured in App Store Connect- but not any new local achievements created in Xcode in GameCenterResources.gamekit Environment Device/OS: iPhone on iOS 26.0 beta (Game Center sandbox) Xcode: 26.0 beta 6 Unity: 2022.3.21 Apple GameKit Unity plugin: 2025-beta1 (GameKit package) Signing: Game Center capability enabled; using development provisioning profile GameKit resources: GameCenterResources.gamekit in project (Target: Unity-iPhone), appears under Build Phases → Copy Bundle Resources
1
0
776
Sep ’25
Testing Gamecenter Accounts
HI all, I'm in the early stages of testing a game that will have real-time device-to-device communication using GameCenter. I've read something about setting up GameCenter "sandbox" accounts to test prior to the game's release, but I can't find anything reliable about how to do so. I've found lots of web pages which purport to describe how to do this task, but what they describe seems to be outdated, as the steps don't appear to be available in modern versions of iOS. I'm testing on iOS 18 and 26. Document search isn't helping--I mostly find information on how to set up StoreKit sandbox accounts, which I assume are different things altogether--so if you could point me towards an article that allows me to test a new, unreleased GameKit app between devices, I'd appreciate it. People are developing GameCenter apps, so I know it's possible... advTHANKSance
1
0
409
Sep ’25
Embedded links not clickable in PDFs for iOS devices
I have a SPFx React application where I am printing the HTML page content using the javascript default window.print() functionality. Once I save the page as pdf from the print preview window and open it using Adobe Acrobat, the links(for eg -> Google) within the content are not clickable and appearing as plain text. I have tried to print random pages post searching with any keywords in Google and saved the files as pdfs, but, unfortunately, the links are still not clickable there as well. To check whether it is an Adobe Acrobat issue, I have performed the same print functionality from Android devices and shared the pdf file across the iOS devices and in that case, when opened using Adobe Acrobat, the links are appearing to be clickable. I am wondering whether it is something related to how the default print functionality works for iPadOS and iOS devices. Any insights on this would be really helpful. Thanks!!! Note: The links are clickable for MacOS as well as for Windows. #ios #ipados #javascript #spfx #react
2
0
148
May ’25
Reality Composer Pro 2.0 shader graphs can't be loaded on visionOS 1
Using Reality Composer Pro 2.0, I created a simple shader graph that displays a texture on an unlit surface: On visionOS 2 beta, I can successfully use ShaderGraphMaterial(named:from:in:) to load that shader graph material and assign it to a model entity. However, on visionOS 1.2 and earlier, either in Simulator or on the device, ShaderGraphMaterial(named:from:in:) fails and I see the following logged to the console: If, using Reality Composer Pro 1.0, I experimentally open the same project and delete and recreate exactly the same nodes above, then ShaderGraphMaterial(named:from:in:) works as expected on visionOS 1.2. Is it a known issue that Reality Composer 2 can't be used with visionOS 1? Is this intentional behavior? I've submitted feedback as FB14828873, including a sample project and repro steps. If possible, I would appreciate guidance from an Apple engineer, like "This is a known issue for [list of node types]" or "Reality Composer Pro 2 is not supported for visionOS 1 development, please refer to [documentation]" or "We recommend [workaround]." Thank you.
Replies
7
Boosts
0
Views
1.6k
Activity
May ’25
Unity PolySpatia
Hello, We are experiencing an issue with apparent lag or latency when interacting with objects in Unity using the XR Interaction Toolkit. Even when interactables are configured with the Movement Type set to Instantaneous, objects exhibit a noticeable delay when following hand movement. This issue is particularly apparent when the hand moves at higher speeds. We would like to know: is any additional configuration required, or is there something else we need to do to resolve this? Thank you very much for your assistance.
Replies
2
Boosts
0
Views
555
Activity
Aug ’25
How to obtain frame rate for iOS proMotion devices
Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?
Replies
1
Boosts
0
Views
163
Activity
May ’25
Will OpenGL API and Drivers be removed after appleOS 26?
Hi, I am a Multimedia and Graphics researcher and I am wondering if OpenGL API and drivers will be removed after appleOS 26? macOS 26 iOS 26 iPadOS 26 visionOS 26 I am asking this because most of the libraries I use depends on OpenGL. Like CGAL, libigl, immediate mode ui, nanovg, nanogui, bullet physics. Transitioning from Vulkan and metal while using and learning those libraries is just not viable. I would like to ask you that. I am the sole developer and I just want to ask you that. Regards.
Replies
1
Boosts
0
Views
241
Activity
Aug ’25
Highlight or select entity in RealityKit
I'm in the process of converting my SceneKit game to RealityKit. In SceneKit I used to be able to mark nodes as selected by setting SCNMaterial.emission with a custom color. I can do the same with PhysicallyBasedMaterial.emissiveColor, but I'd like to keep my entitities unaffected by the scene lights by using UnlitMaterial. In SceneKit I can set a category mask to indicate what light should affect what node, but there doesn't seem to be such a thing in RealityKit. So at the moment it seems like I have to choose between being able to mark an entity as selected, or having entities unaffected by lighting, but not both. Is there some effect or component I can use to mark entities as selected by applying some coloring regardless of the material used?
Replies
2
Boosts
0
Views
209
Activity
Mar ’26
RealityKit Blend Modes
I have 2 planes with textures on. I want these planes to intersect [ –|– ], and I want the blend mode to be additive. Currently I get z fighting on the planes, and I can't see how to set blend modes. I've done this before in Unity and Godot in a fairly straight forward manner. How do I accomplish this with RealityKit, preferably using code only (my scene is quite dynamic)? Do I need to do it with a shader manually? How can I stop the z fighting?
Replies
2
Boosts
0
Views
790
Activity
Aug ’25
RealityKit crashes when rendering SpriteKit scene with SKShapeNode in postProcess callback
I'm converting my game from SceneKit to RealityKit. It has a SpriteKit overlay that according to Explore advanced rendering with RealityKit 2 I can add with the code below. The code runs fine if the SKScene only contains a SKSpriteNode (see the commented out line), but when I add a SKShapeNode with a fillColor instead, the app crashes with this error: -[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5970: failed assertion `Draw Errors Validation MTLDepthStencilDescriptor uses frontFaceStencil but MTLRenderPassDescriptor has a nil stencilAttachment texture MTLDepthStencilDescriptor uses backFaceStencil but MTLRenderPassDescriptor has a nil stencilAttachment texture ' I don't know enough about low-level graphics and stencils yet to figure out a quick solution, so I would appreciate if anyone could share an easy fix or explanation of what's wrong. Thanks! class ViewController: NSViewController { var device: MTLDevice! var renderer: SKRenderer! override func loadView() { let arView = ARView(frame: NSScreen.main!.frame) view = arView arView.renderCallbacks.prepareWithDevice = { [weak self] device in guard let self = self else { return } self.device = device renderer = SKRenderer(device: MTLCreateSystemDefaultDevice()!) let scene = SKScene() let shape = SKShapeNode(rectOf: CGSize(width: 10, height: 10)) shape.fillColor = .red scene.addChild(shape) // scene.addChild(SKSpriteNode(color: .red, size: CGSize(width: 10, height: 10))) renderer.scene = scene } arView.renderCallbacks.postProcess = { [weak self] context in guard let self = self else { return } let encoder = context.commandBuffer.makeBlitCommandEncoder() encoder?.copy(from: context.sourceColorTexture, to: context.targetColorTexture) encoder?.endEncoding() renderer.update(atTime: context.time) let descriptor = MTLRenderPassDescriptor() descriptor.colorAttachments[0].loadAction = .load descriptor.colorAttachments[0].storeAction = .store descriptor.colorAttachments[0].texture = context.targetColorTexture renderer.render(withViewport: CGRect(x: 0, y: 0, width: context.targetColorTexture.width, height: context.targetColorTexture.height), commandBuffer: context.commandBuffer, renderPassDescriptor: descriptor) } } }
Replies
2
Boosts
0
Views
973
Activity
Mar ’26
Transferring Apps with iCloud KVS
Hi All! I'm being asked to migrate an app which utilizes iCloud KVS (Key Value Storage). This ability is a new-ish feature, and the documentation about this is sparse [1]. Honestly, the entire documentation about the new iCloud transfer functionality seems to be missing. Same with Game Center / GameKit. While the docs say that it should work, I'd like to understand the process in more detail. Has anyone migrated an iCloud KVS app? What happens after the transfer goes through, but before the first release? Do I need to do anything special? I see that the Entitlements file has the TeamID in the Key Value store - is that fine? <key>com.apple.developer.ubiquity-kvstore-identifier</key> <string>$(TeamIdentifierPrefix)$(CFBundleIdentifier)</string> Can someone please share their experience? Thank you! [1] https://aninterestingwebsite.com/help/app-store-connect/transfer-an-app/overview-of-app-transfer
Replies
5
Boosts
0
Views
2.5k
Activity
Feb ’26
Warning code: 00000006 will affect background survival
Our APP has integrated 3D function, in order to reduce the memory occupation of the APP in the background, we will uninstall the 3D after the APP enters the background. However, the uninstall also causes problems. When the uninstall process is executed in the background, the app will briefly trigger the background GPU rendering error warning with the error warning code: OGPUMetalError: Insufficient Permission (to submit GPU work from background) (00000006:kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) Execution of the command buffer was aborted due to an error during execution. Insufficient Permission (to submit GPU Work from background) (00000006: kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) excuse me this warning system will tighten APP permissions background?​ For example, limit or shorten the background survival time of the APP. In addition, will the background refresh function fail, resulting in the failure of Bluetooth Ibeacon activation?
Replies
2
Boosts
0
Views
277
Activity
Aug ’25
'tangents' was deprecated in visionOS 2.0: Use cp_drawable_compute_projection instead
I'm using a class with tangents to render on RealityKit for VisionOS but in Vision26 it cause a crash on App and there not documentation how implement cp_drawable_compute_projection I have tried a few options but without success. Could you help me to implement it ? The part of code is: return drawable.views.map { view in let userViewpointMatrix = (simdDeviceAnchor * view.transform).inverse let projectionMatrix = ProjectiveTransform3D( leftTangent: Double(view.tangents[0]), rightTangent: Double(view.tangents[1]), topTangent: Double(view.tangents[2]), bottomTangent: Double(view.tangents[3]), nearZ: Double(drawable.depthRange.y), farZ: Double(drawable.depthRange.x), reverseZ: true ) let screenSize = SIMD2(x: Int(view.textureMap.viewport.width), y: Int(view.textureMap.viewport.height)) return ModelRendererViewportDescriptor(viewport: view.textureMap.viewport, projectionMatrix: .init(projectionMatrix), viewMatrix: userViewpointMatrix * translationMatrix * rotationMatrix * scalingMatrix * commonUpCalibration, screenSize: screenSize) }
Replies
1
Boosts
0
Views
168
Activity
Jun ’25
Core Text incremental redraw glitch: overlapping glyphs during editing
During editing in Pages (or Word) I am getting these glitches (see attachment). Started after the last update to Mac OS 26.3 (beta) Also removed 2 recent instalments (Blackhole audio driver and kDrive/Infomaniak, but trouble is still there. 27" iMac 2020 (Intel) i7 3,8 Ghz AMD Radeon Pro 5500 XT 8 GB 24 GB RAM macOS Tahoe 26.3 (=beta) Tried restart in safe mode, checked fonts. Talked to aissistent to get a solution, but no ...) Thx for any advice, Pieter (not a developer so please kee pit simple 🙏🏻)
Replies
3
Boosts
0
Views
556
Activity
Feb ’26
How to load a USDZ inside of a Reality Composer Pro package as ModelEntity in RealityKit ?
I need a MeshResource from ModelEntity to generate a box collider, but ModelEntity fails to load USDZ files from the Reality Composer Pro (RCP) bundle. This code works for loading an Entity: // Successfully loads as generic Entity previewEntity = try await Entity(named: fileName, in: realityKitContentBundle) But this fails when trying to load as ModelEntity: // Fails to load as ModelEntity modelEntity = try await ModelEntity(named: fileName, in: realityKitContentBundle) I found this thread mentioning: "You'll likely go from USDZ to Entity which contains a MeshResource when you load/init the USDZ file." But it doesn't explain ​how to actually extract the MeshResource. Could anyone advise: How to properly load USDZ files as ModelEntity from RCP bundles? How to extract MeshResource from a successfully loaded Entity? Alternative approaches to generate box colliders if direct extraction isn't possible? Sample code for extraction or workarounds would be greatly appreciated!
Replies
1
Boosts
0
Views
284
Activity
Jun ’25
Unable to play .aivu with VideoPlayerComponent
I’m trying to play an Apple Immersive video in the .aivu format using VideoPlayerComponent using the official documentation found here: https://aninterestingwebsite.com/documentation/RealityKit/VideoPlayerComponent Here is a simplified version of the code I'm running in another application: import SwiftUI import RealityKit import AVFoundation struct ImmersiveView: View { var body: some View { RealityView { content in let player = AVPlayer(url: Bundle.main.url(forResource: "Apple_Immersive_Video_Beach", withExtension: "aivu")!) let videoEntity = Entity() var videoPlayerComponent = VideoPlayerComponent(avPlayer: player) videoPlayerComponent.desiredImmersiveViewingMode = .full videoPlayerComponent.desiredViewingMode = .stereo player.play() videoEntity.components.set(videoPlayerComponent) content.add(videoEntity) } } } Full code is here: https://github.com/tomkrikorian/AIVU-VideoPlayerComponentIssueSample But the video does not play in my project even though the file is correct (It can be played in Apple Immersive Video Utility) and I’m getting this error when the app crashes: App VideoPlayer+Component Caption: onComponentDidUpdate Media Type is invalid Domain=SpatialAudioServicesErrorDomain Code=2020631397 "xpc error" UserInfo={NSLocalizedDescription=xpc error} CA_UISoundClient.cpp:436 Got error -4 attempting to SetIntendedSpatialAudioExperience [0x101257490|InputElement #0|Initialize] Number of channels = 0 in AudioChannelLayout does not match number of channels = 2 in stream format. Video I’m using is the official sample that can be found here but tried several different files shot from my clients and the same error are displayed so the issue is definitely not the files but on the RealityKit side of things: https://aninterestingwebsite.com/documentation/immersivemediasupport/authoring-apple-immersive-video Steps to reproduce the issue: - Open AIVUPlayerSample project and run. Look at the logs. All code can be found in ImmersiveView.swift Sample file is included in the project Expected results: If I followed the documentation and samples provided, I should see my video played in full immersive mode inside my ImmersiveSpace. Am i doing something wrong in the code? I'm basically following the documentation here. Feedback ticket: FB19971306
Replies
3
Boosts
0
Views
865
Activity
Aug ’25
Request: API to temporarily defer Reachability for fullscreen game swipes (bottom edge)
In swipe-driven games, a first downward swipe starting near the home indicator can trigger Reachability, even when using preferredScreenEdgesDeferringSystemGestures = .bottom and prefersHomeIndicatorAutoHidden = true. This causes the app to slide down to half screen and breaks gameplay. Please consider an API to temporarily defer Reachability while a custom gesture is active (similar to existing system gesture deferral), without disabling accessibility globally. Environment: Devices: iPhones with Home Indicator (Face ID) Why this matters: Bottom-origin swipes are core in many games (flick shots, slingshot, physics toss, bottom sheets). Current workarounds degrade UX and discoverability, and players still accidentally trigger Reachability. Feedback Assistant Post
Replies
2
Boosts
0
Views
675
Activity
Aug ’25
CIBumpDistortion filter not working on my view
I'm trying to apply a CIBumpDistortion Core Image filter to a view that contains a UILabel (my storyLabel). The goal is to create a visual bump/magnifying glass effect over the text. However, despite my attempts, the filter doesn't seem to render at all. The view and the label appear as normal, with no distortion effect. I've tried adjusting the filter parameters and reviewing the view hierarchy, but without success. I also haven't been able to find clear documentation or examples for applying this filter to a UIView's layer. // // TVView.swift // Mistery // // Created by Joje on 31/07/25. // import CoreImage import CoreImage.CIFilterBuiltins import UIKit import AVFoundation final class TVView: UIView { // propriedades animacao texto private var textAnimationTimer: Timer? private var fullTextToAnimate: String = "" private var currentCharIndex: Int = 0 // propriedades video estatica private var player: AVQueuePlayer? private var playerLayer: AVPlayerLayer? private var playerLooper: AVPlayerLooper? var onNextButtonTap: () -> Void = {} // MARK: - Subviews // imagem da TV private(set) lazy var tvImageView: UIImageView = { let imageView = UIImageView() imageView.translatesAutoresizingMaskIntoConstraints = false imageView.image = UIImage(named: "tvFinal") imageView.contentMode = .scaleAspectFit return imageView }() // texto que passa dentro da TV private(set) lazy var storyLabel: UILabel = { let label = UILabel() label.translatesAutoresizingMaskIntoConstraints = false //label.backgroundColor = .gray label.textColor = .red label.font = UIFont(name: "MeltedMonster", size: 30) label.textAlignment = .left label.numberOfLines = 0 label.text = "" return label }() private(set) lazy var nextButton: UIButton = { let button = UIButton(type: .system) button.translatesAutoresizingMaskIntoConstraints = false //button.backgroundColor = .darkGray button.addTarget(self, action: #selector(didPressNextButton), for: .touchUpInside) return button }() // MARK: - Lifecycle override init(frame: CGRect) { super.init(frame: frame) backgroundColor = .black setupVideoPlayer() addSubviews() setupConstraints() } override func layoutSubviews() { super.layoutSubviews() playerLayer?.frame = tvImageView.frame.insetBy(dx: tvImageView.frame.width * 0.05, dy: tvImageView.frame.height * 0.18) setupFisheyeEffect() } private func setupFisheyeEffect() { // cria o filtro guard let filter = CIFilter(name: "CIBumpDistortion") else {return print("erro")} storyLabel.layer.shouldRasterize = true storyLabel.layer.rasterizationScale = UIScreen.main.scale // define os parametros filter.setDefaults() // centro do efeito let center = CIVector(x: storyLabel.bounds.midX, y: storyLabel.bounds.midY) filter.setValue(center, forKey: kCIInputCenterKey) // raio de distorção filter.setValue(storyLabel.bounds.width, forKey: kCIInputRadiusKey) // intensidade de distorção filter.setValue(7, forKey: kCIInputScaleKey) storyLabel.layer.filters = [filter] } required init?(coder: NSCoder) { fatalError("init(coder:) has not been implemented") } // MARK: - Button actions @objc private func didPressNextButton() { onNextButtonTap() } @objc private func animateNextCharacter() { guard currentCharIndex < fullTextToAnimate.count else { textAnimationTimer?.invalidate() return } let currentTextIndex = fullTextToAnimate.index(fullTextToAnimate.startIndex, offsetBy: currentCharIndex) let partialText = String(fullTextToAnimate[...currentTextIndex]) storyLabel.text = partialText currentCharIndex += 1 } public func updateStoryText(with text: String) { textAnimationTimer?.invalidate() storyLabel.text = "" fullTextToAnimate = text currentCharIndex = 0 textAnimationTimer = Timer.scheduledTimer(timeInterval: 0.12, target: self, selector: #selector(animateNextCharacter), userInfo: nil, repeats: true) } // MARK: - Setup methods private func setupVideoPlayer() { guard let videoURL = Bundle.main.url(forResource: "static-video", withExtension: "mov") else { print("Erro: Não foi possível encontrar o arquivo de vídeo static-video.mov") return } let playerItem = AVPlayerItem(url: videoURL) player = AVQueuePlayer(playerItem: playerItem) // LINHA COM POSSIVEL ERRO playerLooper = AVPlayerLooper(player: player!, templateItem: playerItem) playerLayer = AVPlayerLayer(player: player) playerLayer?.videoGravity = .resizeAspectFill if let layer = playerLayer { self.layer.addSublayer(layer) } player?.play() } private func addSubviews() { self.addSubview(storyLabel) self.addSubview(tvImageView) self.addSubview(nextButton) } private func setupConstraints() { NSLayoutConstraint.activate([ // TV Image tvImageView.centerXAnchor.constraint(equalTo: centerXAnchor), tvImageView.centerYAnchor.constraint(equalTo: centerYAnchor), tvImageView.widthAnchor.constraint(equalTo: widthAnchor), // TV Text storyLabel.centerXAnchor.constraint(equalTo: tvImageView.centerXAnchor, constant: -50), storyLabel.centerYAnchor.constraint(equalTo: tvImageView.centerYAnchor, constant: -25), storyLabel.widthAnchor.constraint(equalTo: tvImageView.widthAnchor, multiplier: 0.35), storyLabel.heightAnchor.constraint(equalTo: tvImageView.heightAnchor, multiplier: 0.42), //TV Button nextButton.topAnchor.constraint(equalTo: tvImageView.centerYAnchor, constant: -25), nextButton.centerXAnchor.constraint(equalTo: self.centerXAnchor, constant: 190), nextButton.widthAnchor.constraint(equalToConstant: 100), nextButton.heightAnchor.constraint(equalToConstant: 160) ]) } } #Preview{ ViewController() }
Replies
3
Boosts
0
Views
194
Activity
Sep ’25
Metal 4: Proper usage of requestResidency() with unique per-frame textures at 120fps
Hello, I have some confusion regarding ResidencySet. Specifically, about the requestResidency() function: how often should we call it? I have a captureOutput(_:didOutput:from:) method that is triggered at 60 or 120 fps. Inside this method, I am calling the following code every frame: computeResidencySet.removeAllAllocations() сomputeResidencySet.addAllocation(TextureA) computeResidencySet.addAllocation(TextureB) computeResidencySet.addAllocation(TextureC) computeResidencySet.commit() computeResidencySet.requestResidency() // Should we call it every frame? Please keep in mind that TextureA, TextureB, and TextureC are unique for each call (new instances are provided on every frame)."
Replies
1
Boosts
0
Views
619
Activity
Jan ’26
GKLeaderboard.LoadLeaderboards() return empty when testing on Xcode with local gamekit file (Unity)
var allLeaderboards = await GKLeaderboard.LoadLeaderboards(); Log(allLeaderboards.Count); // returns 0 What am I missing?? What doesn’t work: await GKGameActivityDefinition.LoadGameActivityDefinitions() → count = 0 await GKLeaderboard.LoadLeaderboards() (no args) → 0 leaderboards await GKLeaderboard.LoadLeaderboards("MY ID") → returns 0 GkGameActivity.SetScoreOnLeaderboard(Leaderboard, score, context); returns an error since my Leaderboard is null. Activities and leaderboards are defined in GameCenterResources.gamekit in Xcode. Achievements that I add locally in the .gamekit file do not appear at runtime either; only ASC live ones show. ** What works:** xcode- debug- Gamekit- Manage Game progress- I can submit new scores with the plus button and see the notification on my device. await GKLocalPlayer.Authenticate() succeeds. await GKAchievement.LoadAchievements() returns the list of achievements configured in App Store Connect- but not any new local achievements created in Xcode in GameCenterResources.gamekit Environment Device/OS: iPhone on iOS 26.0 beta (Game Center sandbox) Xcode: 26.0 beta 6 Unity: 2022.3.21 Apple GameKit Unity plugin: 2025-beta1 (GameKit package) Signing: Game Center capability enabled; using development provisioning profile GameKit resources: GameCenterResources.gamekit in project (Target: Unity-iPhone), appears under Build Phases → Copy Bundle Resources
Replies
1
Boosts
0
Views
776
Activity
Sep ’25
Testing Gamecenter Accounts
HI all, I'm in the early stages of testing a game that will have real-time device-to-device communication using GameCenter. I've read something about setting up GameCenter "sandbox" accounts to test prior to the game's release, but I can't find anything reliable about how to do so. I've found lots of web pages which purport to describe how to do this task, but what they describe seems to be outdated, as the steps don't appear to be available in modern versions of iOS. I'm testing on iOS 18 and 26. Document search isn't helping--I mostly find information on how to set up StoreKit sandbox accounts, which I assume are different things altogether--so if you could point me towards an article that allows me to test a new, unreleased GameKit app between devices, I'd appreciate it. People are developing GameCenter apps, so I know it's possible... advTHANKSance
Replies
1
Boosts
0
Views
409
Activity
Sep ’25
Virtual Controllers on Mac via the Game Controller Framework
Hi fellow devs, I have a quick question is it possible to have virtual controllers on Mac. For instance can my app exclusively manage the controller and output it into the Game Controller framework? And create a virtual controller to allow for features such as controller emulation, haptic control, and others.
Replies
7
Boosts
0
Views
770
Activity
Jan ’26
Embedded links not clickable in PDFs for iOS devices
I have a SPFx React application where I am printing the HTML page content using the javascript default window.print() functionality. Once I save the page as pdf from the print preview window and open it using Adobe Acrobat, the links(for eg -> Google) within the content are not clickable and appearing as plain text. I have tried to print random pages post searching with any keywords in Google and saved the files as pdfs, but, unfortunately, the links are still not clickable there as well. To check whether it is an Adobe Acrobat issue, I have performed the same print functionality from Android devices and shared the pdf file across the iOS devices and in that case, when opened using Adobe Acrobat, the links are appearing to be clickable. I am wondering whether it is something related to how the default print functionality works for iPadOS and iOS devices. Any insights on this would be really helpful. Thanks!!! Note: The links are clickable for MacOS as well as for Windows. #ios #ipados #javascript #spfx #react
Replies
2
Boosts
0
Views
148
Activity
May ’25