I’m a registered iOS developer, and I’ve been facing an issue with installing iOS developer updates for the past couple of years. I can download the updates, but they get stuck at 99.9% complete and don’t finish. I’ve tried following the instructions to force restart the phone, but it stays on the Apple logo screen until it dies. I can update official iOS versions, but not beta versions. To update, I have to put the phone in DFU mode and install the update that way. This is frustrating and prevents me from making timely updates to my app and from diagnosing new issues during testing. I’d like to request that Apple investigate this issue and identify a solution. For reference, I’ve installed a bare-bones version with no new apps, and the problem persists. I would like a resolution that allows me to update normally without having to DFU the phone each time. This occurs via OTA or IPSW manual download and installation. Please refer to the following FB submission numbers: FB21642029 and FB21017894. CAN SOMEONE PLEASE RESPOND BACK TO THIS MESSAGE AND HELP ME TROUBLESHOOT THIS ISSUE?!

I am located in Taiwan and recently updated my Mac to the latest OS and installed the newest Xcode. However, I’m experiencing extremely slow download speeds when trying to add the iOS 26.2 Simulator Runtime (approx. 8GB) via Xcode > Settings > Platforms. It is currently downloading at a rate of only 500MB per hour, which is impractical. I have checked the official downloads page but couldn't find a standalone DMG link for this specific version. My questions are: Is there a direct download link (DMG) available on the Apple Developer portal for the iOS 26.2 Simulator? If no direct link exists, are there any recommended methods to accelerate the download? (e.g., using terminal commands or changing DNS settings). Any help or direct URLs would be greatly appreciated. Thank you!

I would like to inquire about a concern related to the app review process. Specifically, I would like to understand if forcefully denying an application's execution on the iOS Simulator (for instance, by implementing a check in the code that prevents the app from running in a simulated environment) could negatively impact or delay the app’s approval during the App Store review process. This measure is intended solely for security and integrity reasons during development and distribution. The app functions normally on real devices, and all other guidelines and requirements outlined by Apple are being strictly followed. Could you please confirm whether such a restriction on the Simulator is acceptable, and if there are any best practices or recommendations from Apple regarding this? Thank you for your support, and I look forward to your guidance.

hey I accidentally deleted my info.plist with holds my app version and other critical things and I don't know how to get it back or how to recode it

I'm running macOS 15.5. I now have Xcode 26 and I'm testing my iOS app against iOS 26. I've encountered several UIKit / iOS 26 bugs I'd like to report. In Feedback Assistant I choose "Developer Technologies & SDKs". Eventually I get asked "What build does the issue occur on?". The list of choices is: iOS 18.2 Seed 4 iOS 18.1.1 iOS 17.7.2 An earlier iOS build I'm not sure So how to I report this as an iOS 26 beta 1 issue?

Hi, I have a .NET MAUI app running on .NET 9. When I test locally in debug or release mode it works perfectly fine, but when testing from TestFlight it crashes almost immediately every time. I have sent the crash report to TestFlight and produced the symbolicated.crash file (attached), but I'm not sure it's helpful for understanding how to fix the issue. If anyone can help me understand what the issue might be and any possible fixes it'd be very much appreciated. I'm developing using Visual Studio 2022 paired to my Mac. I have distributed previously without issue, but now can't seem to, even after reverting recent code. net9.0-ios 15.0 symbolicated.crash

I'm trying to compile a simple hello world C++ program on my MacBook Pro. I have a M3 Pro (Nov 2023) running Sequoia 15.6. The program is: #include <iostream> int main() { std::cout << "Hello World!"; return 0; } The error I get is: In file included from test.cpp:1: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/iostream:42: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/ios:220: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/__locale:15: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/__memory/shared_ptr.h:13: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/__compare/compare_three_way.h:13: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/__compare/three_way_comparable.h:12: In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/__compare/common_comparison_category.h:15: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/cstddef:42:5: error: <cstddef> tried including <stddef.h> but didn't find libc++'s <stddef.h> header. This usually means that your header search paths are not configured properly. The header search paths should contain the C++ Standard Library headers before any C Standard Library, and you are probably using compiler flags that make that not be the case. 42 | # error <cstddef> tried including <stddef.h> but didn't find libc++'s <stddef.h> header. \ | ^ However, I can see stddef.h in /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/v1/ and in /usr/local/include

Hi guys! I have gone through an absolute nightmare, trying to solve the issue that I am about to tell you about. As the title says, I am getting the error: Library '/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/17/lib/darwin/libclang_rt.profile_driverkit.a' not found I trimmed off part of that directory as I did not want to reveal that information about my computer. From what I can tell, the file in question is no longer even a part of Xcode. I have searched, it is not on my computer anywhere. I have also downloaded older versions of Xcode to search with it. None of them have it. I have literally tried everything under the Son to solve this issue. I have been stuck on it for two days. I have even resorted to doing something I hate, which is asking for ChatGPT to assist me with solving the issue. No help there. I am at my wits end. So I am coming to you guys, have you seen this error? Any ideas at all? The odds are pretty good whatever you recommend I have probably already tried 200 times over. But I am still open to hearing anything. Have any of you had this error? Any ideas? I am on the latest version of macOS. The project is for a macOS app. M4 Mac mini. Any additional information I can provide, that will be helpful? At this point, I am leaning more towards this being a bug with Xcode than anything.

Hi all, I’m developing a watchOS app and have seen cases where the app is terminated by the system — for example, due to CPU usage limits being exceeded (watchdog termination). Here’s a portion of one of the crash reports: Exception Type: EXC_CRASH (SIGKILL) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: CAROUSEL 2343432205 <RBSTerminateContext| domain:10 code:0x8BADF00D explanation:[app<app_name>:898] Failed to terminate gracefully after 5.0s ProcessVisibility: Foreground ProcessState: Running WatchdogEvent: process-exit WatchdogVisibility: Foreground WatchdogCPUStatistics: ( "Elapsed total CPU time (seconds): 11.280 (user 9.800, system 1.480), 100% CPU", "Elapsed application CPU time (seconds): 5.162, 46% CPU" ) reportType:CrashLog maxTerminationResistance:Interactive> My questions: 1.) Is there any way to get notified (via Crashlytics, Xcode Organizer, or any other reporting mechanism) when this type of system-level termination happens — similar to how we’re notified of crashes? 2.)Is there any way for a watchOS app to receive runtime warnings from the system when it’s about to exceed CPU or memory limits — similar to UIApplication.didReceiveMemoryWarningNotification on iOS? Thanks in advance!

I’ve developed a virtual machine manager application using the macOS Virtualization framework. The application currently supports both NAT and bridged networking configurations. I’m now looking to implement host-only networking, where the guest VM can communicate with the host but not with external networks. Is this networking mode supported by the Virtualization framework, and if so, what is the recommended approach to set it up? Additionally, I would like to implement port forwarding from the host to the guest (e.g., redirecting traffic from a specific port on the host to a port on the guest). Is there a way to configure port forwarding using the built-in APIs of the Virtualization framework, or would this require a custom networking solution? Any guidance or best practices for implementing these features within the constraints of the framework would be greatly appreciated.

I just turned it on by accident and I can’t turn it off… I’m using IOS 26 rn and I can’t go back and I can’t disable the developer mode, I’m not a developer so yeah

Hi, This can't be right. Is there really no replacement for Quartz Debug?!? As the sole developer on a project who has an Intel Mac and Quartz Debug, I am basically a god now. Everyone else has Apple Silicon and... I think they're randomly guessing at this point. Because I have entire teams sending me Intel Mac builds of stuff just so I can test it in QD. This is THE TOOL we used at NewTek to find performance issues, and THE TOOL I used for a dozen companies after that, to help them with similar issues. If there's no replacement, is there a reason there's no replacement? This feels like a massive step backwards, having to guess at problems like this. -Chilton

Any time I attempt to download the latest beta of macOS 26, Safari stops the download at Zero KB, with no indication of why. I'm able to download OS 26 beta 8 for the other platforms absolutely fine, just not macOS. Pressing the little orange "reload" button, just results in another copy of the same zero KB file bundle on the file system. Can anyone help please?

When the power button is pressed to turn off the alarm while the screen is locked, stopIntent will not be called.

I observed the following problem: A scientific code to perform Reverse Monte Carlo simulations (‘rmcxas’) compiled with the most up to date version of gcc/gfortran and Xcode including command line tools on Mac OS Sequoia 15.4 on a Macbook air with M4 processor generates the following problem upon starting it in a terminal: dyld[10154]: dyld cache '(null)' not loaded: syscall to map cache into shared region failed dyld[10154]: Library not loaded: /usr/lib/libSystem.B.dylib Referenced from: <0144F82E-003C-37A9-A544-9AE6336E549B> /Users/markuswinterer/bin/rmcxas Reason: tried: '/usr/lib/libSystem.B.dylib' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/usr/lib/libSystem.B.dylib' (no such file), '/usr/lib/libSystem.B.dylib' (no such file, no dyld cache), '/usr/local/lib/libSystem.B.dylib' (no such file) zsh: abort rmcxas This occurs only about every 5th time the code is started. Help would be highly appreciated.

My book env: MacBook Air Apple M4 15.6.1 (24G90) I installed JDK hs_err_pid6813.log by sdkman and homebrew, but when I ran java, os crashed: /opt/homebrew/o/openj/libexec/openjdk.jdk/Contents/Home/bin | stable ./javac --verison ABRT | 12:32:20 # # A fatal error has been detected by the Java Runtime Environment: # # SIGBUS (0xa) at pc=0x000000010211b340, pid=7237, tid=9987 # # JRE version: (21.0.7) (build ) # Java VM: OpenJDK 64-Bit Server VM (21.0.7, mixed mode, sharing, tiered, compressed oops, compressed class ptrs, g1 gc, bsd-aarch64) # Problematic frame: # V [libjvm.dylib+0x35f340] CodeHeap::allocate(unsigned long)+0x15c # # No core dump will be written. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again # # An error report file with more information is saved as: # /opt/homebrew/Cellar/openjdk@21/21.0.7/libexec/openjdk.jdk/Contents/Home/bin/hs_err_pid7237.log # # [1] 7237 abort ./javac --verison Does that mean I have to reinstall OSX?

I'm using Xcode 16.3 and I want to add the key "NSUbiquitousContainers" but I cannot do it in the Entitlements file, it should be in info.plist file! I have done it before but in previous versions of Xcode when the info.plist was in the project navigator. However, now I cannot find the file and I did not find any way to create it! Please guide me in detail how to proceed (I'm not new to Swift or SwiftUI but not familiar to project settings)?

辅助功能 | Apple Developer Documentation In the illustration on this page related to "Prefer system-defined colors," Light is incorrectly translated as "细体". However, in the context of this article, translating it as "浅色" (light color) would be a more appropriate choice.

I submitted a Feedback (FB17843422) on Monday evening after the keynote about Tahoe beta 1. At the time it still wasn't listed in the "What build does the issue occur on?" dropdown. I selected "I'm not sure" instead hoping I could update it later but as far as I can tell that isn't the case since "Add more information" only lets me add additional comments. Is there some way for me to do that or is it even necessary?

We are looking for a platform or portal provided by Apple that allows us to track crashes, hangs, or other runtime issues faced by users while using our iOS/macOS application. This is similar to how we currently use Windows Error Reporting (WER) for our Windows application. Important note: Our application is not distributed via the Apple App Store — it is delivered through enterprise distribution or ad-hoc provisioning.