Hi, I am using Installer JS in Distrtibution file which is created using productbuild command. I am trying to read the installed version of app from the plist file present in the /var/db/receipts folder. It gives the following warning. If I enable the flag , notarization will fail. FJS: Package Authoring Error: access to path "/var/db/receipts/com.xxx.xxx.plist" requires Following is the function I have used to read the installed version. system.files.plistAtPath() I have also tried the following function to read the version from .app file. system.files.bundleAtPath Both the functions give the warning. Is there are a way to avoid this warning or a better way to read the installed version? Regards Prema Kumar

Trying to publish my .NET MAUI app via the transporter after migrating it from Xamarin (using the App Store Connect feature directly within visual studio 2022 has never worked for me) and getting this error. Validation failed (409) Missing required icon file. The bundle does not contain an app icon for iPhone / iPod Touch of exactly '120x120' pixels, in .png format for iOS versions >= 10.0. To support older versions of iOS, the icon may be required in the bundle outside of an asset catalog. Make sure the Info.plist file includes appropriate entries referencing the file. I have setup my maui app to use the asset catalog with the .pngs setup as bundled resources and I have also tried using the .svg method, both resulting in this error. When I zip and unzip my .ipa file I can see the asset catalog as part of the payload (C:\Archives\AIM_MAUI\Payload\AIM_MAUI.app\AppIcon.appiconset) Here is the contents of the Contents.json file { "images" : [ { "filename" : "icon_40.png", "idiom" : "iphone", "scale" : "2x", "size" : "20x20" }, { "filename" : "icon_60.png", "idiom" : "iphone", "scale" : "3x", "size" : "20x20" }, { "filename" : "icon_58.png", "idiom" : "iphone", "scale" : "2x", "size" : "29x29" }, { "filename" : "icon_87.png", "idiom" : "iphone", "scale" : "3x", "size" : "29x29" }, { "filename" : "icon_80.png", "idiom" : "iphone", "scale" : "2x", "size" : "40x40" }, { "filename" : "icon_120.png", "idiom" : "iphone", "scale" : "3x", "size" : "40x40" }, { "filename" : "icon_120.png", "idiom" : "iphone", "scale" : "2x", "size" : "60x60" }, { "filename" : "icon_180.png", "idiom" : "iphone", "scale" : "3x", "size" : "60x60" }, { "filename" : "icon_20.png", "idiom" : "ipad", "scale" : "1x", "size" : "20x20" }, { "filename" : "icon_40.png", "idiom" : "ipad", "scale" : "2x", "size" : "20x20" }, { "filename" : "icon_29.png", "idiom" : "ipad", "scale" : "1x", "size" : "29x29" }, { "filename" : "icon_58.png", "idiom" : "ipad", "scale" : "2x", "size" : "29x29" }, { "filename" : "icon_40.png", "idiom" : "ipad", "scale" : "1x", "size" : "40x40" }, { "filename" : "icon_80.png", "idiom" : "ipad", "scale" : "2x", "size" : "40x40" }, { "filename" : "icon_76.png", "idiom" : "ipad", "scale" : "1x", "size" : "76x76" }, { "filename" : "icon_152.png", "idiom" : "ipad", "scale" : "2x", "size" : "76x76" }, { "filename" : "icon_167.png", "idiom" : "ipad", "scale" : "2x", "size" : "83.5x83.5" }, { "filename" : "icon_1024.png", "idiom" : "ios-marketing", "scale" : "1x", "size" : "1024x1024" } ], "info" : { "author" : "xcode", "version" : 1 } } I have tried manually using the actool tool from Xcode 16.4 to create the Assets.car file that is seeming to be missing and leading to this issue but even that can't compile the icons (or even a simple sample appicon.appiconset from Xcode with a singular .png added) and I am beginning to think there's an issue with the actool itself. I have tried reinstalling Xcode and every time the actool is just a partial download or a stub of the tool and not the real tool (actool size on my Mac is only 170kb and per my research it should be at least a couple mb) Is there any workaround?

When building an app with iOS26 beta3, I received a warning saying "Launch screens will soon be required." Does this mean that, similar to the thread below, the app might not launch in builds for iOS27 and later (including iOS27)? https://aninterestingwebsite.com/forums/thread/789004

For the Linux version of my application which is written in C++ using Qt, I display the CHM format help files with this code: QString helpFile{ QCoreApplication::applicationDirPath() + "/Help/" + tr("DeepSkyStacker Help.chm","IDS_HELPFILE") }; QString program{ "kchmviewer" }; QStringList arguments{ "-token", "com.github.deepskystacker", helpFile }; helpProcess->startDetached(program, arguments); (helpProcess is a pointer to a QProcess object) The -token com.github.deepskystackerpart of that ensures that only a single instance of the viewer is used for any code that uses that invocation. Are there any chm file viewers for macOS that are capable of that sort of trick? The ones I've found on the App Store give minimal information and appear to be very simple minded tools that are not not intended for integration into an application as above. I know that MacPorts offers ports of kchmviewer but I'd prefer not to use either that or HomeBrew ... David

I'm adding a few custom signposts with mxSignpost(.begin,...) and mxSignpost(.end,...). Is there a way to force delivery of the MXMetricPayload so I don't need to wait for the daily aggregation to be pushed?

Hi, I’m trying to free up space on my computer and have uninstalled Xcode. However, I noticed that many large files remain on the filesystem even after uninstalling it. The largest remaining files (~33 GB) are iOS Simulator images located at: /System/Volumes/Data/Library/Developer/CoreSimulator/Volumes I attempted to delete them using root privileges, but it seems that these system files are mounted as read-only. I’m reaching out to ask for guidance to ensure that these files do not contain anything important for macOS, and that it’s safe to remove them before getting in recovery mode. Thank you very much for your advice!

I’ve created a document type for my app and set it up in the Info Configuration in Xcode. This all works as expected: Implemented with the Transferrable API and ShareLink, I can share an app’s file via the Files app or Notes and then import the file via a Share extension and the fileImport swiftUI api. My question is regarding Messages, specifically. It appears as a ShareLink option and I’m able to send my app’s document type via a message, but I’m unable to open it or share it (internally, with my app), other than being able to forward or delete it. If I copy the file, I can’t access it within my app (it’s still stored in the Messages private bundle) and startAccessingSecurityScopedResource returns false as expected. The message does detect the right icon, so it’s recognizing the custom document type. If my Share Extension, exported document type, and transferable implementation is configured correctly, should I be able to open a file for my app shared via Messages? Is this an allowed action? I get various answers from AI, and I can’t test this in the Simulator on pre-26 devices.

TL;DR version: AkVox - “Your App in Your User’s Language” Quickly and easily localize your app into as few or as many languages as you want with AkVox. Longer version: AkVox can localize any Xcode project. Simply drag your Exported Localizations folder into AkVox, click translate, then export, and you’re ready to import the translated localizations catalogs back into Xcode. Alas, you cannot import the whole localizations folder as one, you must import each catalog individually, a process that takes around 10 seconds per language. AkVox can also assist you when you’re ready to publish your app on App Store Connect. You can create a list of texts you will enter to promote your app and AkVox will translate them. Again, you can’t apply all your translations to the App Store in ne go, you have to apply each language individually. To make this task less painful, AkVox has a convenient set of buttons to make the copy and paste process as quick and simple as possible. The same arrangement is available when you come to add “mini texts” during setting monetization subscriptions. AkVox employs Google Cloud Translate which means you will need an API Key to be able to run full translations. However, Google offers a generous monthly allowance of 500,000 characters to be translated for free each month. This may well mean that you don’t ever pay for the translation process, just the very low price to use AkVox. The free version of AkVox simulates translating by substituting jumbled versions of Hamlet’s “To be or not to be” speech – this is instead of utilising what would normally be used in this case, the tediously dull Lorem Ipsum text. To see AkVox explained in detail, go to the website: https://akvox.com/

Hello, According to documentation, the App Store does not re-download the entire app when updating, but instead generates an update package containing only the changed content compared to the previous version. I’d like to clarify the following points: 1. Granularity of file changes If only part of a large file changes, does the update package include the entire file, or does it patch only the modified portions within that file? 2. Guideline on separating files The documentation recommends separating files that are likely to change from those that are not. How should this be interpreted in practice? 3. Verifying the diff result Is there a way for developers to check the actual diff result of the update package generated by the App Store without submitting the app? Is there a diff command tool or comparison method closer to the actual App Store update process? 4. Estimating update size during development For apps with large-scale resources, minimizing update size is critical. Are there any tools or best practices to estimate the size of the update package before submitting to the App Store? Any clarification or reference materials would be greatly appreciated. Thank you.

Weirdness going on here. Our app is crashing on startup with iPad 7s running iOS 18.5. Before updating to iOS 18.5, it was working fine on iPad 7s. Even with iOS 18.5, it is working fine on every device we have tried including dozens of other iPads and iPhones. We have narrowed it down to the SquareReaderSDK. If we remove that SDK, it will launch and work without issues. But, many of our users need the SquareReaderSDK. The crash happens at app load, before appDelegate didFinishLaunchingWithOptions. So we can't figure out any way to debug the issue. Is anyone else having a similar issue? Square thinks it is an Apple issue.

I need to install the AirPlay profile on an iphone to watch decrypted traffic in ATS for development work on CarPlay. The documentation for ATS says to click "Utilities -> Download Profiles -> AirPlay Diagnostic Mode". When I do this, it brings up a file dialog, presumably to select a location to download. But nothing happens. The other profiles launch a web browser and download the .mobileconfig profile. How do I get the AirPlay profile? Am I misunderstanding how this is supposed to work? I found ATSAssetsInfoDefault.plist which references these files. And they all have https://aninterestingwebsite.com/services-account/download?path=/iOS/iOS_Logs/... except the AirPlay profile, which is type "slug" and just says ats-airplay-diagnostic-mode-profile. Is this a bug in the app?

I am encountering an issue where the application running on a physical device does not reflect the most recent source changes. Observed behavior On the device, the application behaves as if an older binary is running. Specifically: Newly added debug UI labels do not appear. The logs still show old debug prints instead of new ones. Steps taken to ensure a clean install: Changed the bundle identifier Set a new display name (the app still showed the old display name when I click run). Deleted the app manually from the device before every reinstall. Build and install steps Performed multiple clean builds with a fresh Derived Data path. Built from terminal using xcodebuild (Debug configuration, physical device target, automatic provisioning). Installed using: xcrun devicectl device install app Verified: The updated source files are listed under Compile Sources and compiled from the expected path. The bundled Info.plist includes the new bundle identifier and display name. Installation output confirms new bundle identifier. Question What could cause a newly built and installed application to run with behavior from an older binary? Are there recommended ways to verify that the device is actually launching the latest installed build, and to ensure stale binaries are not being executed? Any guidance on additional diagnostics or misconfigurations to check would be appreciated.

I developed an app using Unity and exported it as an iOS project file so that I could package it in Xcode. Now, I’m facing an issue where users who previously installed version 1.0 are still seeing the old version after installing the updated version 2.0. Although the installation process for version 2.0 appears to complete (with the installation animation), the app still opens as version 1.0. I am an individual developer but used enterprise signing for distribution. I’m quite confused and have looked into the issue—some sources mention it might be related to CFBundleVersion, but modifying it didn’t help. I’d really appreciate some help with this. o(╥﹏╥)o

How to replicate: Design a icon in icon composer Save it and put the .icon file in your project, then in your targets put the name of the .icon file in there. Either clean build folder or restart IDE One Error: unable to open dependencies file (/Users/user/Library/Developer/Xcode/DerivedData/project-fqrfzzkwgrutdabmcqjeupvyetci/Build/Intermediates.noindex/project.build/Debug/project.build/assetcatalog_dependencies_thinned) And one warning: Icon export exited with status 255, signal 0 Is this a known issue or a easy fix? Or is it a issue on my end? Thanks

In Simulator Korean character system has not working well. I want to type "", however, if I type the same thing on the simulator's virtual keyboard (Korean), it comes out as ''. I think this is caused by IME system in ios simulator bug. I think this has been happening since IOS 17.

In the online documentation for InstallerJS, it is stated that the unit for the availableKilobytes property of the target field is kilobytes. Isn't it actually bytes because of a bug in the very first release of macOS that supported InstallerJS? [Q] Has there been a fix in the recent years regarding this property that would explain why the documentation says it's kilobytes? Even though at the time of this writing, the unit is still bytes when you call my.target.availableKilobytes I'm using this call to dump the value of this property in install.log: system.log(my.target.availableKilobytes + ''); Ref. https://aninterestingwebsite.com/documentation/installer_js/target/1811975-availablekilobytes (FB20448952)

Hello, I'm building this mobile app using Quasar - Capacitor on iOS. The app is working perfectly, but I'm encountering an issue whenever I push the rep I get this error: "Error Unable to open base configuration reference file '/Volumes/workspace/repository/ios/App/Pods/Target Support Files/Pods-App/Pods-App.release.xcconfig'. App.xcodeproj:1" I've tried every possible solution and made sure that everything is set perfectly. Can anyone please help me with that? Thanks in advance, appreciate you 🫶🏻

I have a project inside the project structure. I have around 300 unit tests in the project. I see that for some of the subprojects, the coverage numbers show up correctly, but for other subprojects and the main project, the coverage number shows zero, even though the tests are running successfully. The log I get is: Aggregation tool emitted warnings: warning: /Users/ABC/Library/Developer/Xcode/DerivedData/projectABC-hfzmkbdgpiswoxfvvnvhrafaiqyb/Build/ProfileData/A8EEC1FB-1699-4C29-A88C-D3DDA226DBC0/0A416494-A393-4319-AA47-502D72084C9C-43351.profraw: raw profile version mismatch: Profile uses raw profile format version = 8; expected version = 10 PLEASE update this tool to the version in the raw profile, or regenerate the raw profile with the expected version. I only have one Xcode (26.0.1) on my machine. I tried cleaning the derived data, the cleaning project, and rerunning the tests, but it hasn't helped. Please help me get the coverage number back. Thank you.

I am integrating On Demand Resources into my Unity game. The resources install without any problems if the internet connection is stable: all resources are installed. While testing various scenarios without an internet connection, I encountered the following problem: if I turn off the internet during installation, I don't get any error messages, but if I turn the internet back on, the download no longer continues (and I still don't get an error). If I reopen the application with a stable internet connection, the download will always be at 0%. Please tell me what I am doing wrong. #import "Foundation/Foundation.h" #if ENABLE_IOS_ON_DEMAND_RESOURCES #import "Foundation/NSBundle.h" #endif #include <string.h> struct CustomOnDemandResourcesRequestData; typedef void (*CustomOnDemandResourcesRequestCompleteHandler)(struct CustomOnDemandResourcesRequestData* handler, const char* error); #if ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { NSBundleResourceRequest* request; }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { NSMutableArray* tagArray = [NSMutableArray array]; for (int i = 0; i < tagCount; i++) { const char* tag = tags[i]; if (tag != NULL) { [tagArray addObject:[NSString stringWithUTF8String:tag]]; } } NSSet* tagSet = [NSSet setWithArray:tagArray]; CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); data->request = [[NSBundleResourceRequest alloc] initWithTags:tagSet]; [data->request beginAccessingResourcesWithCompletionHandler:^(NSError* error) { dispatch_async(dispatch_get_main_queue(), ^{ const char* errorMessage = error ? [[error localizedDescription] UTF8String] : NULL; handler(data, errorMessage); }); }]; return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { [data->request endAccessingResources]; delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return data->request.progress.fractionCompleted; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { float priority = (float)data->request.loadingPriority; return priority; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { if (priority < 0.0f) priority = 0.0f; if (priority > 1.0f) data->request.loadingPriority = NSBundleResourceRequestLoadingPriorityUrgent; else data->request.loadingPriority = (double)priority; } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { NSString* resourceStr = [NSString stringWithUTF8String: resource]; NSString* path = [[data->request bundle] pathForResource: resourceStr ofType: nil]; if (path == nil) { return NULL; // или другое значение по умолчанию } const char* result = strdup([path UTF8String]); // копируем строку return result; // в C# нужно будет освободить память } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { free((void*)str); } #else // ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); if (handler) handler(handlerData, NULL); return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { return NULL; } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { } #endif // ENABLE_IOS_ON_DEMAND_RESOURCES

I am developing an Augmented Reality (AR) navigation application for the iPad, utilizing the ARCL library to place Points of Interest (POIs) in the real world. The application's behavior varies significantly based on the device's networking configuration: Cellular Network (Expected Behavior): On an iPad with a cellular modem, when using the cellular network, all POIs are placed accurately with correct orientation. Wi-Fi Only (Expected Behavior): On a Wi-Fi-only model (no GPS chip), POI placement is inaccurate, confirming the need for an external GPS receiver for that hardware configuration. Cellular + Wi-Fi (Anomalous Behavior): The iPad is a cellular model (equipped with GNSS/GPS). The device is connected to a Wi-Fi network (enforced via an MDM profile, preventing the user from disabling Wi-Fi). When actively connected to this specific Wi-Fi network, the AR POIs consistently display with an incorrect orientation and placement, even though the device hardware has a dedicated GPS chip. The placement error strongly suggests that the device's determined location or heading is erroneous. It appears that the active Wi-Fi connection is somehow interfering with or overriding the high-accuracy GNSS/GPS data, leading to a flawed Core Location determination that negatively impacts the ARCL world tracking and anchor placement. Has anyone experienced a scenario where an active Wi-Fi connection on a cellular iPad model causes Core Location to prioritize less accurate location data (potentially Wi-Fi-based location services) over the device's built-in GNSS/GPS, resulting in severe orientation errors? We observed that on Apple map(native application) as well it is showing wrong location and orientation when it is connected to WiFi