Hello. I’m on iOS 26. I’m very protective over my children’s phone and use screen time religiously. ios 26 does have delete history grayed out , but there’s a glitch! You’re able to swipe and delete history under the bookmarks history and tabs section. Also if you type in a website like Walmart, it will bring it up and then allow you to swipe to the left and hit the red delete history and it shows up nowhere in your history! please help me find a fix for this!! i do allow safari but definitely want to be able to check the websites being viewed!!! also - iOS 26 does not let u block apple.comunder your not allowed websites. Which means they can now use Apple Maps and third party browser on Apple.com for example under the simple weather app before I had Apple blocked to where none of this could be accessed through stock apple apps! i appreciate any help!!!

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

When I try to create a post in Apple Support Community, it forces me to create a new account (for some supersmart reason because my apple account is apparently not enough). In this process, I am required to pick a new username and choose my communications preferences. The next screen? 403 Forbidden Error page.

Hello, I am a developer from Russia, I recently paid for a subscription to apple developer. 8,990.00 Russian rubles were debited from me. The subscription is displayed in my active subscriptions from my apple account. It shows in the application that the enrollment through the application is not working. The payment receipt was sent to the post office when, how much, and for how long everything about the subscription is. Tell me what are my next steps, how much should I reap?

Installation has completed login is successful but after 30 secs it returns to login screen safe mode does the same. tried recovery mode and reinstalled. Still in the login loop. what are my choices now?

I'm concerned that the Apple Vision Pro is too costly for low-income developers to develop for. Any thoughts?

Hi all, Well Im about to publish an app for iOS and the process is almost done but I don't know how is it to publish the same for MacOS, I mean, I can generate the app file from my engine (Unity) and even run it, but from there what are the steps? do we need to pass this to Xcode too? if so please direct me to where its explained because I couldn't find it, thanks a lot for any help

I have filed 27 bug reports against macOS using Feedback Assistant and none have had any sort of follow-up. I'm wondering if anyone at Apple looks at these reports? A few of these involve accessibility features that are not working (for example: speak announcements doesn't work -- and yes, my feedback is much more detailed than "doesn't work"). I would have thought issues with accessibility would be a high priority for Apple to fix quickly. Another report is that Grapher uses black text on dark gray making it very difficult to see the formula you enter. This should be a one-line code fix. These two, and 25 other bug reports have seemingly been ignored. Several of these reports indicate more than 10 similar reports, yet go unfixed. Leading me back to my opening question -- does anyone at Apple read these reports? I'd like to think I'm helping Apple to deliver a more perfect product but I feel like I'm wasting my time writing detailed bug reports. Is there another way to bring these to Apple's attention?

Hi, I’ve recently installed the iOS 26 DB, and I’m experiencing heating issues on my iPhone. Is there a fix to this? Also, is it a bug or a feature, that I can’t remove certain sections in the Photos app rather than rearranging them. Pls lemme know. Thanks.

Hey team, I have an app in CarPlay where i was pushing the CPNowPlayingTemplate as follows: self.interfaceController.pushTemplate(CPNowPlayingTemplate.shared(), animated: true) This used to work perfectly, but suddenly I have started to get this error NSInvalidArgumentException: Unsupported object <CPNowPlayingTemplate: 0x119a0b5c0> <identifier: 6EE4E5A9-B1FB-4341-A485-78D7DDEBD8D0, userInfo: (null), tabTitle: (null), tabImage: (null), showsTabBadge: 0> passed to pushTemplate:animated:completion:. Allowed classes: {( CPActionSheetTemplate, CPAlertTemplate, CPVoiceControlTemplate, CPTabBarTemplate, CPListTemplate, CPInformationTemplate, CPContactTemplate, CPMapTemplate, CPGridTemplate, CPSearchTemplate )} How is this possible? Even on Apple docs, it says to pushTemplate Refer https://aninterestingwebsite.com/download/files/CarPlay-Developer-Guide.pdf https://aninterestingwebsite.com/documentation/carplay/cpnowplayingtemplate/

We're sending the spcData payload to our fairplay key server (version 5.1) with the base64 encoded string of our fairPlay.cer that was downloaded from our developer portal and we're getting a spcVersionErr (-42580) for the spc version. The value that is being received by the key server seems to be 813827283 when it should be either 1 (base_constants.SPCVersion.v1.rawValue) or 2 (base_constant.SPCVersion.v2.rawValue). We're assuming we're encoding the fairplay.cer incorrectly. Any insight from anybody would be appreciated.

Hi everyone, my Digital Services Act (DSA) status in App Store Connect has been “In Review” for over a week. Is this normal? The app is already available in 178 countries, but it can’t be released in the EU (my home market) solely because this DSA isn’t approved yet. How long did it take for you? Is there anything that helps speed up the DSA review? Thanks for any insights.

Steps to Reproduce make an outbound call cover the sensor Actual Behavior the screen won't go dark device iOS Result iphone15 17 Pass iphone14p 18.0.1 Pass iphoneXs_pro max 18.1.1 Pass iphone13pro max 18.2.1 Pass iphone16pro 18.2 Fail iphone15pro max 18.3 Fail iphone12 pro max 18.3 Fail ps: Skype has the same probelm Seems like this issue only happens on iOS18.2+ on some devices, so is there a bug for this?

Unable to search contacts , app crashes Call screen goes compl transparent

HiIm currently on iOS 11 Beta 2 (Build 15A5304i) With Update 1 Build 15A5304j just been released, will there be any difference since last weeks release?I can't update OTA to the new build released today.ThanksBarry

When I updated IOS 26.1, When someone call me over voice call phone kept vibrating after call has been picked for 15 sec. Can you please check what’s the issue

Issue in now mode in console Reproduce steps: open /private/var/log/com.apple.xpc.launchd/launchd.log in console app click now to enable it wait for system to write some to the log. instead of tailling log, it comes to the start of log. I have filed a bug 3 months back FB16849784 it is not resolved yet.

The first Beta install stopped recognizing a Yamaha USB audio interface. The next two installs brought the recognition back. The last Beta install doesn't recognize the interface completely. The midi implementation works but the audio implementation isn't recognized in Audio/Midi setup. This might be something to look at in the next Beta release or something audio interface venders should look at in their next driver release.

Area: Software Update Type of Feedback: Application Bug Description Device: iPhone 13 Pro running iOS 26 Build environment: Xcode 16.4 Problem description: When a text field has secureTextEntry = YES and Password Autofill / Passkeys is active, the autofill panel is not included in the rect reported from the keyboard notifications (UIKeyboardFrameEndUserInfoKey or others). As a result, when calculating the offset to move the screen up and reveal the hidden input field, the field is not displayed correctly because the reported keyboard height is smaller than the actual visible height. Observed behavior: This only occurs on devices running iOS 26 built with Xcode 16.4. On previous versions of iOS, with the same settings (secureTextEntry and Autofill active), the rect correctly includes the autofill panel height, and the UI works as expected. I tested with both UIKeyboardDidShowNotification and UIKeyboardWillChangeFrameNotification, and in both cases the behavior is the same: the height is incorrect (smaller than expected with the autofill panel). What I expect / questions: That UIKeyboardFrameEndUserInfoKey (or the related notification) correctly reports the total area covered by the keyboard, including any password autofill panel, when secureTextEntry is active. That the new behavior in iOS 26 be documented if this omission is intentional, or otherwise considered a bug if it is not. If there is any official workaround suggested by Apple for developers affected by this issue while a fix is provided. Thank you for your support.

Hello, I recently submitted my Swift Student Challenge app playground and realized after submission that I accidentally selected Swift Playgrounds as the software to run it, instead of Xcode 26 or later. My project builds and runs successfully in Xcode 26 using the iOS 26 SDK and simulator. However, when opening the same .swiftpm project in the Swift Playgrounds app on iPad, it does not compile because Swift Playgrounds currently only supports up to iOS 18 SDK and does not support iOS 26 APIs. The submission itself is complete, builds correctly in Xcode, and was submitted before the deadline. The incorrect selection of Swift Playgrounds was an honest mistake during the submission process. I wanted to ask whether reviewers are able to run the submission using Xcode 26 in cases like this, or if there is anything I should do. Thank you very much for your time.