My app works perfectly the first time it is used but when returning to the start after playing the game and playing another it does some random things. I figure it is because the app still retains the previous game in it’s memory allocation? My question is, what is the best way programmatically to have an app start fresh and not have to quit it and open it again?

O v er the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt More than 50 remote lockdown and diagnostic services are listed as active. Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt route-info.txt remotectl_dumpstate.txt [ assetsd.diskwrites_resource-2025-06-25-221428.json linkText

Dear Apple Support Team, I am writing to request clarification regarding paid service eligibility for my iPhone 14 Pro outside its original country of purchase. Here are the details of my device: Model: iPhone 14 Pro Serial Number: J346337TKY Purchase Date: December 2022 Current Location: Astana, Kazakhstan Warranty Status: Expired I recently visited an Apple Authorized Service Provider in Kazakhstan, and I was informed that my device could not be accepted for repair due to regional restrictions, even on a paid basis. I would appreciate your assistance in confirming whether my device qualifies for paid repair service in Kazakhstan, or if it is strictly limited to service in its country of origin. If not eligible, could you please advise on the nearest country or region where I can receive authorized service? Looking forward to your guidance on the next steps. Best regards, Ruslan D

I would like to inquire about an error that has started occurring while debugging AppStore billing. (In sandbox environment) This error occurs after entering a password and completing the purchase process, and in this case, no completion alert appears. The error doesn't seem to depend on the purchase item, sandbox account, or device, and shows unstable behavior - sometimes succeeding and sometimes failing. Additionally, this error started occurring after special debugging where the network was disconnected during the purchase process. Moreover, the same error occurs in the TestFlight version of our already released normal (supposedly) version. I think this might be a sandbox-specific error where the system has temporarily become unstable, but what do you think? If so, how can I resolve this issue? I would appreciate your insights on the cause and appropriate response. Error details below: <SKPaymentQueue: 0x283b3d070>: Payment completed with error: Error Domain=ASDErrorDomain Code=500 "(null)" UserInfo={NSUnderlyingError=0x28364d770 {Error Domain=AMSErrorDomain Code=305 "Purchase Failed" UserInfo={NSLocalizedDescription=Purchase Failed, AMSStatusCode=200, AMSServerPayload={ "cancel-purchase-batch" = 1; customerMessage = "Unauthorized_message"; failureType = ""; "m-allowed" = 0; pings = ( ); }, NSLocalizedFailureReason=Server canceled the purchase}}, storefront-country-code=JPN, client-environment-type=Sandbox}

Based a quick research, comfort and fit, noise cancellation issues and durability seems to be the most consistent issues with pilot headsets. I wouldn’t say there is a problem here, because you can easily throw out the faulty headset and spend another $1000 on a new one. However, what if apple can profit by introducing their version of pilot headsets? Besides, most airlines use Apple iPads for Navigation, crew scheduling etc. Make it a one stop shop. Apple already has the framework for music headsets, why not use it as a base for pilot headsets? Disrupt an already stagnant market and give pilots a great alternative. Tap into the interests of a new generation of pilots again most which already uses Apple products. Come up with a new fresh look of ‘pilot comms.’ A good idea is to pitch to the GA (general aviation) industry maybe include Apple headsets with the purchase of a new aircraft.

If I have, say a doctor appointment in the Calendar app, and I'm leaving to go to it, the address will appear in Apple Maps on CarPlay. Forgive if I'm getting the details wrong, but I believe if I bring up the Map, it will be available to tap on, so I can quickly go there. I think it may also show up on one on the car-play screens that shows a few different panels.

Connect the Zigbee color temperature light bridge to the Home app through the Matter Bridge (a device with a screen), and adjust the color temperature of the light on the screen. However, the color temperature of the corresponding device on the Home app is not synchronized, as shown in the following figure What information is missing from the Home app when my device reports color temperature during control?

My imessage has been acting up for 1 month now. It fails to activate my phone number and prefers my email. This is a beta issue Apple support has told me and it needs fixing asap.

Recently have updated one phone to the new 18.6 public beta and now I cant log into my Cox hotspot. It pops up asking for username/password as always, but when you click either of them to type it in it closes the window. Tested my second phone that wasnt updated and works just fine. Updated it to the new 18.6 and now the same thing happens

I’m running macOS 26 Beta 1 (build 25A5279m) on a 2019 Mac Pro (MacPro7,1) with a single 4K display connected via HDMI. Whenever I attempt to launch Finder, WindowServer immediately aborts and the machine reboots. Crash details: Process: WindowServer (PID 1441) Exception: EXC_CRASH (SIGABRT) triggered in thread 0 (ws_main_thread) Termination Reason: Abort trap: 6 Backtrace highlights: CA::OGL::MetalContext::draw(MTLPrimitiveType, …) hits an internal __assert_rtn in libsystem_c.dylib Subsequent calls all stem from QuartzCore’s OpenGL/Metal bridge (CA::OGL::render_layers, LayerNode::apply, etc.) Related threads: Thread 2 (com.apple.coreanimation.render-server) idle in mach_msg_overwrite Thread 1 shows AmbientDisplay and ColorSync callbacks running Hardware/Software: MacPro7,1 (2019) macOS 26.0 Beta 1 (25A5279m) 4K monitor via HDMI System Integrity Protection enabled What I’ve tried so far: Safe-boot (crash still occurs) Switching display profiles in System Settings → Displays → Color (no effect) Happy to provide any additional logs or verbose console output. Let me know if there’s any other data that would help diagnose the Metal/OpenGL integration issue in this beta.

With iOS 26.0 (23A5276f) I can’t make calls via Bluetooth on any device. Any workaround?

my app was kicked off the App Store because it needed updating. i have now done that and it is ready for TestFlight. before I uploaded it, I had look around the App Store to see if there were any similar apps and I found one which just looks like it’s pinched the ideas about how it works-it’s uniqueness claiming to be the first of its kind and who it is aimed at Its not exactly the sameseems silly similar to mine as I was reading the text seemed similar to mine. it’s not exactly the same but the principle of it the idea of the way it works is definitely the same as mine. I couldn’t look at the code because it didn’t seem to be open source software databases. it is not free to download but I didn’t want to buy it. Is there a way of finding out more about its. Function and ti see / compare the code to see if there is infringement or a violation.

After i install ios 26 i can’t go back to other videos after i comment on tiktok videos

I recent installed IOS 26, with my iphone 15 as a machine. I am experiencing glitch on switching apps, switching users in a specific apps. Delay is also visible when unlocking the phone, typing, touching the screen, going back to the previous app (clicking the arrow button on the top left). When using a two fingers navigating the phone, the other finger is unrecognizable when clicking on to something. Overall, UI were elegant and amazing. Please fix the responsiveness and may consider lower versions of iphone when possible.

iOS 18 System Bug Causes URL Scheme Failure A bug in iOS 18 causes URL Schemes to become invalid through the following steps, resulting in failure to open apps via URL Scheme. Reproduction Steps: Long-press the app icon Select "Require Face ID" Choose "Hide and Require Face ID" to hide the app Go to the App Library and locate the hidden app in the "Hidden" folder Uninstall the hidden app reinstalling the hidden app After reinstalling the app, all configured URL Schemes will become invalid, causing failure when attempting to open the app via URL Scheme. The issue appears to be that after uninstalling a hidden app and reinstalling it, the system fails to restore the app's URL Scheme functionality.

calling this app store connect API returns 201 created but does not clear purchase history for sandbox account

I have an iPhone 14 running iOS 26 Beta 2 that I wanted to start using Personal Voice on. It allowed me to complete the recordings and start the process, however even with the phone charging and locked the process hangs. It is connected to WiFi and cellular while attempting to run. It is connected to a 20W apple charger with an offical cable. I have a sneaking feeling it's related to me running the iOS beta on this device. I've provided some info below. iOS 26 Beta 2 iPhone 14 128gb Model MPUF3ZD/A No SIM restrictions

I need help I dont know how to get this API key to work

In preparing my ipad 7th gen for resale, I factory reset and now it will not power up. Tried hard reset, new cables, different computer. iTunes does not recognize the ipad yet device manager shows it hooked to usb port. Any advice? Thanks!