When attempting to access the (Certificates Identifiers & Profiles) page, I receive the message "Unable to find a team with the given Team ID to which you belong". Even while set as a developer or as an admin I still receive the same message above.

Hi there, We've discovered a problem with our iOS app. We've been attempting to add a Driverkit driver to it, but any time we run the app through Testflight, the driver installs fine, but when we go to enable the driver toggle in the app's settings, the toggle stays on, but in the device logs I can see: could not insert bundle at <private> into manager: <private> As you would expect - this means the driver is not actually enabled and does not respond to a device being connected to the iPad. This does not happen when building & running the app locally, nor does it happen when installing an Ad Hoc build. We also have a different app, not yet shipped. We are able to add the driver to that app without issue. It works after going through Testflight. What we have discovered now is that everything works fine even if we just create an entirely new app with it's own bundle IDs. I should point out that in all cases, we're keeping the capabilities the same for each of these apps/IDs - including the managed capabilities. The bundle IDs that have this problem are older (5 years old or more). It seems like any newer ID will work, but trying to add the driver (and the associated managed capabilities) to an older app/ID results in this vague error message, with no further details. If we inspect the resulting dexts, we can also see that the "Internal requirements code size" is different on the ones that fail. The failing ones have a size of 204 bytes, whereas the working ones all have a size of 220 bytes. Not sure if that's related but it's strikingly consistent. Does this mean there is an issue with older app IDs, and we need Apple to manually refresh them in some way before the driverkit capabilities will work after going through Testflight? We have two apps in this state, both are of the same vintage (~5 years+). We've been battling this issue for months on and off, so would appreciate some help.

I've added my Vendor ID to the appropriate entitlement files but my binary fails validation when trying to upload it to the store for distribution. The embeded.mobileprovision file in the generated archive shows an asterisk instead of my approved Vendor ID. How can I make sure the embedded provisioning file has my Vendor ID?

I am using Automatically Manage Signing And I have registered my Mac UUID in developer account, but it is still giving me these errors - Device My Mac is not registered to your team Ai Glider Inc. Devices must be registered in order to run your code, but you do not have permission to register them. Please check with your team's admin. No profiles for 'com.aiexample.sebexample' were found Xcode couldn't find any Mac App Development provisioning profiles matching 'com.aiexample.sebexample'.

In my application I validate the authenticity of my own binaries by checking that the Team Identifier in the code signature matches a predefined value. Currently I do not perform a full signature validation that verifies the certificate chain up to Apple’s root CA. When attempting to do this using SecStaticCodeCheckValidityWithErrors (or validateWithRequirement), the operation sometimes takes several minutes. During that time the calling thread appears blocked, and the system logs show: trustd: [com.apple.securityd:SecError] Malformed anchor records, not an array Because of this delay, I decided to rely only on the Team Identifier. My question is: Can it be assumed that if a Mach-O binary contains a Team Identifier in its code signature, then it must have been signed with a valid Apple Developer certificate? Or are there cases where a binary could contain a Team ID but still not be signed by Apple’s trust chain? Thanks for the help !

To learn how to develop/distribute a DriverKit driver (DEXT) and a UserClient app correctly, I am trying to run the following sample dext and app. https://aninterestingwebsite.com/documentation/driverkit/communicating-between-a-driverkit-extension-and-a-client-app?language=objc I walked throught steps in README.md included in the project and faced issues. First, I referred the "Configure the Sample Code Project" section in the README.md and configured the sample code project to build with automatic signing. I could run the app and activate the dext successfully and made sure the app could communicate with the dext. Next, I tried the manual signing. I followed steps described in the "Configure the Sample Code Project" section carefully. The following entitlements has already been assigned to my team account. DriverKit Allow Any UserClient Access DriverKit USB Transport - VendorID DriverKit I could build both app and dext and could run the app. However, when I clicked the "Install Dext" button to activate the dext, I got the following error: sysex didFailWithError: extension category returned error Am I missing something? I would also like to know detailed steps to publicly distribute my dext and app using our Developer ID Application Certificate, as README.md only shows how to configure the project for development. Xcode version: 16.3 (16E140) Development OS: macOS 15.5 (24F74) Target OS: macOS 15.5 (24F74)

I created an MadOS app with xcode 16.5 with a developer id certificate. I've been trying to install a distribution certificate for over a week with several co-workers. I can add a distribution certificate to my key chain, and created a provisioning profile. I've tried every combination but none work. I put xcode in automatic signing but can only see my developer id, if I put it in manual with and without a provisioning profile but if I give the app binary, other users can't run the app because the certificate isn't working. I need support to work with me to look the developer portal and my system to figure this out.

I encountered code signing issue with Apple Distribution certificate for both iOS and MacCatalyst. The app crashes with "Beta Profile". I followed this instruction to manually re-sign my ipa to confirm that I use the Apple Distribution and the correct Provisioning Profile. https://gist.github.com/WDUK/4239548f76bd77b2c4b0 When I double click on the Apple Distribution certificate in KeyChain Access, it shows "Extension: Apple Mac App Signing (Development)" and "Extension: Apple Developer Certificate (Submission)" I have been stuck in this issue for more than a month. I really need help because I do not know how to proceed further. Thank you.

I've been distributing my Math Education app (Java-based) as a downloadable .dmg. My sw manufacturing process was working well on my Intel-iMac a year ago (signing, notarization, stapling). I need to support Apple Silicon, so I replicated the SW manuf. stack on my M2 MacBook, including putting my Developer and Installer Certificates in the Keychain Access. I get through building the M2,M2,M4 .dmg installer file just fine. But the Codesign is failing. It should be prompting me for my MacOS password (it does this in the Intel-Mac process), but fails this command: codesign --sign "Pierre Bierre (SL7L4YU8GT)" --force --options runtime --verbose --timestamp ~/DFG2D_MacOS_Manufacturing/MacOSInstallers/DFG2D_Mac_J17010_295 The response was: error: The specified item could not be found in the keychain. The signer reference is correct, and works fine on the Intel-Mac codesign process. What could explain why the same script fails in the M2 environment? Does codesign normally prompt for the MacOS user password ? Why would that fail?

New to working with xcode and building apps. I started last weekend, and deploying to my usb connected iPhone 16 was working great all week. Yesterday, I upgraded to a paid developer account to start using TestFlight, and I could no longer deploy to my phone. Failed to install embedded profile for com.spred.spred-alpha : 0xe800801a (This provisioning profile does not have a valid signature (or it has a valid, but untrusted signature).) i using automatic provisioning - not a custom provisioning profile. i have tried: deleting all the certificates in keychain for my developer account and recreating them, and also doing the same in the developer portal. logging out and logging back in with my developer id in xcode deleting the app bundle directory and all other associated files in the Xcode/DerivedData directory reinstalling Xcode cleaning my build directory and trying again. changing the bundle identifier to a new name. (It always matches the portal app name) Among other things. It just won’t work. I can run the app inn a simulator, but not get it deployed to my phone. what else can I do? The only things I can think of are that somehow Xcode is still stuck using the free account somehow, or that the free account cert originally used expired after 7 days, and now I’m in some stuck state.

Hi folks, I'm trying to generate a provisioning profile that includes both Healthkit and MusicKit entitlements. The healthKit pieces if fine, and included in the profile. However, despite selecting Musickit under services in the ID setup, the entitlement doesn't seem to be included in the profile. Other steps taken: Setup the app in App Store Connect, generated a media ID and Key. Tried both automatic and manual signing. Are there specifics tricks to getting this one to work?

We have a command line script that runs xcodebuild to make an archive, then runs xcodebuild again to export the archive to make an ipa, and then runs "altool --validate-app" to check that everything will be fine for a subsequent upload to the app store. This has been working fine for a few years but recently stopped working and we cannot figure out why. The validation fails with this error: ERROR: [altool.105912F20] Validation failed (409) Invalid Provisioning Profile. The provisioning profile included in the com. bundle [Payload/.app] is invalid. [Missing code-signing certificate]. A distribution provisioning profile should be used when uploading apps to App Store Connect. (ID: ) The project is configured with 'Automatically manage signing' unchecked, and the profile was created on aninterestingwebsite.com/account/resources/profiles and the matching profile magically appears in the "Provisioning Profile" drop down in Xcode. The profile was created with two certificates checked, but examining the embedded.mobileprovision profile that ends up in the compiled ipa payload it appears to contain 19 certificates (probably all of them for this org?). Is there a way to find out which certificate is missing exactly? And once identified is it a case of adding it to the profile used during compilation to fix this? Ancillary question: why does the embedded.mobileprovision file contain so many certificates, and how does xcodebuild decide which ones it includes there?

Unable to Verify App An internet connection is required to verify trust of the developer "Apple Development: John Doe (ABCXYZ123)". This app will not be available until verified. I've been getting this constantly over the last few weeks. It has been a real struggle to get anything done. Sometimes it goes away on its own after I try to launch the app a few times, but currently it's just staying down and I can't do any work. Apparently there were issues with some Apple server ppq.apple.com before. They seem to be back, because trying again right now: ping ppq.apple.com PING use1-ppq-ext-prod.apple.com (17.33.200.235): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 ^C --- use1-ppq-ext-prod.apple.com ping statistics --- 3 packets transmitted, 0 packets received, 100.0% packet loss ping apple.com PING apple.com (17.253.144.10): 56 data bytes 64 bytes from 17.253.144.10: icmp_seq=0 ttl=60 time=9.776 ms 64 bytes from 17.253.144.10: icmp_seq=1 ttl=60 time=8.726 ms ^C --- apple.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 8.726/9.251/9.776/0.525 ms This is incredibly disruptive. Surely there must be a way to disable this online verification? This is a development device that never leaves my desk and never installs any software except the things I build locally from my Mac (which I have trusted on the device).

Hi all, I'm developing a simple Finder Sync Extension, using Xcode 16.3. When running in Debug with Xcode, everything works fine. Instead, when compiling in Release and launching the containing app (by double-clicking on it), the Extension is not recognized (neither loaded) by the system. The only difference between Debug and Release stands in Signing configuration: Debug: Release: As you can see, in Release I'm using a Provisiong Profile, configured with my company's Developer ID. I'm wondering if Capabilities and Entitlements are not what is needed by my app. Anyway, I have no idea what the issue is. Any suggestion will be appreciated. Thank you in advance _Alex

When building to macOS on GameMaker, I get the error "this identity cannot be used for signing code" when using the Developer ID Installer certificate. The certificate was neither expired nor revoked, but nonetheless I created new certificates to start fresh but am still getting that error. I don't get issues building to iOS via GameMaker, just to macOS. If it makes any difference, I only noticed this issue started happening after I converted my Apple Developer Program account from an individual account to an organizational account, although it was weeks to months before I built to macOS via GameMaker before then, so I don't know if it correlates with that.

Hi there! I have an issue with uploading a PKG installer to the MacOS AppStore. Uploading with: xcrun altool --upload-app -t macos -f $PKGPATH -u $DEVELOPER_ID -p $APP_SPECIFIC_PWD results in error: *** Error: Validation failed Invalid Provisioning Profile. The provisioning profile included in the bundle com.frogblue.frogCom [com.frogblue.frogCom.pkg/Payload/frogSIP.app] is invalid. [Missing code-signing certificate.] For more information, visit the macOS Developer Portal. (ID: fc4e5488-6d09-4ab2-b1f7-017a33c69723) (409) Application seems to be correctly code signed with „3rd Party Mac Developer Application“ certificate. codesign -dv --verbose=4 /Users/dietmar.finkler/Desktop/frogSIP/deploy/frogSIP.app Identifier=com.frogblue.frogCom Format=app bundle with Mach-O universal (x86_64 arm64) CodeDirectory v=20500 size=266432 flags=0x10000(runtime) hashes=8315+7 location=embedded VersionPlatform=1 VersionMin=720896 VersionSDK=918784 Hash type=sha256 size=32 CandidateCDHash sha256=923de799a54616706b76050b50b7ee6d59f8355a CandidateCDHashFull sha256=923de799a54616706b76050b50b7ee6d59f8355a65aa7cce03e34bb2033da1e9 Hash choices=sha256 CMSDigest=923de799a54616706b76050b50b7ee6d59f8355a65aa7cce03e34bb2033da1e9 CMSDigestType=2 Executable Segment base=0 Executable Segment limit=31604736 Executable Segment flags=0x1 Page size=4096 CDHash=923de799a54616706b76050b50b7ee6d59f8355a Signature size=9109 Authority=3rd Party Mac Developer Application: frogblue TECHNOLOGY GmbH (UG2P6T5LNH) Authority=Apple Worldwide Developer Relations Certification Authority Authority=Apple Root CA Timestamp=26.02.2025 at 10:07:08 Info.plist entries=31 TeamIdentifier=UG2P6T5LNH Runtime Version=14.5.0 Sealed Resources version=2 rules=13 files=1124 Internal requirements count=1 size=212 The PKG build with productbuild seems also be correctly code signed with„3rd Party Mac Developer Installer“ certificate. pkgutil --check-signature /Users/dietmar.finkler/Desktop/frogSIP/frogSIP-1.2a2.pkg Status: signed by a developer certificate issued by Apple (Development) Certificate Chain: 1. 3rd Party Mac Developer Installer: frogblue TECHNOLOGY GmbH (UG2P6T5LNH) Expires: 2026-02-25 17:17:54 +0000 SHA256 Fingerprint: D1 9E AC 27 C7 26 F3 2E 1E F5 50 2C 7A 1B 1D FB 54 D6 17 C1 1C 58 C1 7E F8 87 B6 44 D1 49 17 DC ------------------------------------------------------------------------ 2. Apple Worldwide Developer Relations Certification Authority Expires: 2030-02-20 00:00:00 +0000 SHA256 Fingerprint: DC F2 18 78 C7 7F 41 98 E4 B4 61 4F 03 D6 96 D8 9C 66 C6 60 08 D4 24 4E 1B 99 16 1A AC 91 60 1F ------------------------------------------------------------------------ 3. Apple Root CA Expires: 2035-02-09 21:40:36 +0000 SHA256 Fingerprint: B0 B1 73 0E CB C7 FF 45 05 14 2C 49 F1 29 5E 6E DA 6B CA ED 7E 2C 68 C5 BE 91 B5 A1 10 01 F0 24 KeyChain login items show both "3rd Party Mac Developer Application" and "3rd Party Mac Developer Installer“ certificates. But checking with security find-identity -v -p codesigning shows only the "3rd Party Mac Developer Application“ certificate. "3rd Party Mac Developer Installer“ is missing. I check also the entitlement in the app package, which looks ok for me. codesign -d --entitlements :- /Users/dietmar.finkler/Desktop/frogSIP/deploy/frogSIP.app <?xml version="1.0" encoding="UTF-8"?><!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "https://www.apple.com/DTDs/PropertyList-1.0.dtd"><plist version="1.0"><dict><key>com.apple.application-identifier</key><string>UG2P6T5LNH.com.frogblue.frogCom</string><key>com.apple.developer.aps-environment</key><string>production</string><key>com.apple.developer.associated-domains</key><array><string>applinks:go.dev.frogblue.cloud</string><string>applinks:go.test.frogblue.cloud</string><string>applinks:go.prod.frogblue.cloud</string></array><key>com.apple.developer.team-identifier</key><string>UG2P6T5LNH</string><key>com.apple.security.app-sandbox</key><true/><key>com.apple.security.cs.disable-library-validation</key><true/><key>com.apple.security.device.audio-input</key><true/><key>com.apple.security.device.camera</key><true/><key>com.apple.security.network.client</key><true/><key>com.apple.security.network.server</key><true/></dict></plist> What I am missing? Thanx for any hint! Regards Dietmar Finkler

I was trying to put my game to test flight. I would test features like ads and in-app-purchases, then put on the Appstore(release). The game already works on Ipad. For test flight, the "automatically manage signing" option was enabled. Then I pressed the "archive" button. Built succeeded. Then I clicked the distribute button. That time, I had an error. "Upload failed, Invalid signature, App is not properly signed". I researched, and found special characters in name, team name and address can make errors. My name, address and team name have special characters(turkish). If it will be resolved, I want to re-write(fix) my name, team name and address. I already tried to change my name, team name and address from apple developer website but failed. They are asking a document of my identity of my new name but I didn't changed my name and address. Overall, there aren't any other facts that cause this issue as I know. If I send my current, unchanged identity and home address, could they allow to change(fix) them? On Console Log: DangerNo.app/DangerNo: ID : 6cfa13a9-685c-4df9-86dd-7506d67be8c5 DangerNo.app/Frameworks/UnityFramework.framework/UnityFramework: ID : 2b63aacc-9caf-453c-913f-bae0db14d363 My App ID : 6744022885 Error : Invalid Binary rejection email indicating a corrupted code signature was detected. Explanation : Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target.

I am running into this error with productbuild in github actions where the program hangs with a specific developer id. I have verified that my certification files are properly uploaded etc. and i am able to run this without the --sign command online and with --sign offline. if i sign with a "3rd party mac developer installer: ***" it will run but then crash on stapling because this isn't the actual org i want to staple and don't really need to verify that i could staple with this other license since it is my personal license and i will be leaving this job soon so setting up all my other certs is a waste of time since it doesn't solve the problem. When i use my bosses/org "Developer ID Installer: ***" productbuild just hangs. I am at a loss here... the acutal command running is productbuild --resources ./resources --distribution distribution.xml --sign "${{ secrets.DEVELOPER_ID_INSTALLER }}" --timestamp "${{ env.ARTIFACT_NAME }}.pkg" I have confirmed that my distribution file is fine etc. because I can productbuild without signing fine. Any suggestions on where to go?

Hello, In our Account we have an iOS app with an explicit identifier "ABC123.com.some.app" that is using non-team prefix which is DEF456. It has also explicit identifiers for Widgets bundle and Notification Service. Due to non-team prefix, it can't access e.g. shared keychain and data put there by our other apps. Since we are working on features that require these capabilities, we would like to update the app identifier, so it is prefixed with our team id DEF456. Initially, we thought that the process would require steps like: Create new app, team-prefixed identifier(s) for app and all things that need them Recreate the provisioning profiles with new App Identifier Roll out the app using with new profiles via App Store but when trying to create the new identifier with com.some.app and team id prefix DEF456 we are getting following error: An App ID with Identifier com.some.app is not available. Please enter a different string. Can anybody advise us how to correctly perform such change and what steps are required from our end? We would like to keep our existing App Store entry, ratings and smoothly switch users. We are aware that this kind of migration results in loss of Keychain access. Thanks for any advice on that!

Hi everyone, I'm following up on this post I made earlier about an issue I'm having with FamilyControls and the DeviceActivityMonitor extension not working for external TestFlight testers. To briefly recap: I have official Apple approval for the com.apple.developer.family-controls entitlement (distribution) The entitlement is added to both my main app and the DeviceActivityMonitor extension The App Group is correctly configured for both targets On internal TestFlight builds, everything works as expected: app blocking works, the extension runs, and selected apps are shielded. On external TestFlight builds, users get the Screen Time permission prompt, can select apps to block, but nothing is blocked. Since that post, I submitted a Code Level Support request, and Apple asked me to file a bug report via Feedback Assistant. I did that almost a month ago. The only reply I’ve received since is that they can’t give a timeframe or guarantee it will be resolved. I'm stuck in limbo with no updates and no fix. This feature is critical to my app and I cannot launch without it. I’ve reached out to other developers who use app blocking, and none of them have run into this issue. My setup seems correct, and Apple has not said otherwise. If anyone has experienced something similar, found a workaround, or knows how to get real movement on a bug report like this, I would really appreciate any help. It’s been weeks, and I just want to launch my app. Thanks so much.