For the pushToken sent by APNS to register a wallet pass for update notifications, is there a max length or size that APNS will send? I save the token in my database and have it defined as varchar(256), but I have had some instances where the pushToken is larger than that. I'd like to know if there's an absolute max size that APNS will send. Then I'll know if I should reject requests with tokens larger than what's expected, and/or if I need to make the token size larger in the database.

I'm encountering an issue with Apple Pay on both Wallet and the Watch app where the app name is not showing up on the back of the payment card(Card details). The pass was successfully provisioned, and everything seems to be working, but the expected app name or brand isn't displayed, and instead, I see the generic "Something went wrong. Try again Later" message. Do we need to configure something to get this displayed in Wallet app?

Currently I have an app which is completely free for all the users, I might have future versions where I will introduce paid version, where I will surely use Apple IAP and Revenue CAT. How should I clarify this to App store? Should I tell only what I am doing today, or also tell what I will do in future and keep Apple IAP in my conversation?

We have developed Apple Wallet Extension for our App. The in-app provisioning for the card is working. However when we try to add the card from Wallet extension it gives error saying "Your issuer does not yet offer support for this card". From the apple documentation we can see the issues is same as mentioned in Scenario 2 at following link https://applepaydemo.apple.com/in-app-provisioning#8.4 We are getting eligibilityStatus as 0 Below is the response from Wallet captured using SysDiagnosis https://crt-pod1-smp-device.apple.com:443/broker/v4/devices/0434320BCB1A90022306073796318273728D0A367FA927F4/cards 200 Time profile: 1.77856 seconds { x-conversation-id = ...... Content-Type = "application/json" x-pod = "crt-pod1" x-xss-protection = "1; mode=block" Server = "Apple" x-pod-region = "paymentpass.com.apple" regionbrokerurl = "https://crt-pod1-smp-device.apple.com:443/broker" Date = "Wed, 06 Aug 2025 11:39:30 GMT" Content-Length = "488" x-envoy-upstream-service-time = "1400" Strict-Transport-Security = "max-age=31536000; includeSubdomains" cross-origin-opener-policy = "same-origin" x-keystone-correlationid = ...... x-content-type-options = "nosniff" Vary = "accept-language" x-frame-options = "SAMEORIGIN" } { applicationIdentifier = ......; auxiliaryCapabilities = { }; cardType = 4; deviceProvisioningDataExpected = 1; eligibilityStatus = 0; identifier = ......; learnMoreURL = "https://www.apple.com/ae/apple-pay/banks/ae/en-ae.html"; nonce = ......; paymentApplications = ( { appletTypeIdentifier = Argon; paymentType = Credit; } ); region = "paymentpass.com.apple"; sanitizedPrimaryAccountNumber = 7008; sanitizedPrimaryAccountPrefix = ""; }

We are working with Saferpay. And integrating Applepay Server to Server. But we are having token generation issue. It does not give a valid test card information. We have created a tester account as India country. Is that an issue?

we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

Hi everyone, I am new to Apply Pay, but I have already implemented IAP for subscriptions in my app. My app also has other functionalities, it also acts as a person-to-person marketplace, as users can post events or online courses which can be bought by other users to participate. My question is that I have read Apple's review guidelines but it is still unclear for me if I can use Apple Pay (with for example Stripe) or do I still need to use IAP for this online content. Also non profit organizations also can register which can recieve donations, can I also use Apple Pay for that or do I still need IAP there, because it would be nice if Apple would take 30% of donations.

Hello, I am following up on my previous feedback (Feedback ID: FB17175593) regarding the in-app provisioning failure for Apple Pay. In that report, I detailed errors encountered during the card addition process (notably issues related to a missing teamID and cryptographic material errors). Could you please provide an update on the investigation progress? I appreciate your assistance and look forward to your response.

Hello, We’re seeing an issue where the Apple Pay button is visible in Safari but not clickable for certain users, while it works normally for others. This happens on our site (https://store-qa2.enphase.com/ ) as well as on other sites for the same affected users. Currently, we display the Apple Pay button based on the following condition: Boolean(window.ApplePaySession) && ApplePaySession.canMakePayments(); For affected users, the button shows up as expected, but it’s not interactive. All users (both affected and unaffected) are on the latest versions of Safari and macOS/iOS. Could someone clarify what additional conditions Safari/Apple Pay requires for the button to be fully functional? And under what circumstances could it be visible but not clickable?

I am writing regarding an issue I have encountered while attempting to complete a payment using test users created within the Sandbox environment of Apple Pay. The problem persists specifically when trying to make payments through the demo page at https://applepaydemo.apple.com/. Problem Description: When initiating a payment process with either of the following test user accounts. The flow proceeds as follows: The Apple Pay window appears correctly. Processing begins but does not conclude successfully. After processing concludes, there is no prompt for 'Pay with Touch ID'. Additional Information: Device & OS Version: MacOS 15.3.2 Browser & Version: Safari 18.3.1 Real Device or Simulator: Real device used First Occurrence: Before January 1st, 2025 Custom Configurations or Backend Used: No custom configurations or backend modifications are being utilized during interaction with the demo page. Could you please provide assistance in resolving this issue?

We have used the ApplePayRecurringRequest parameter required for Apple Pay subscriptions, but during testing the payment, the Apple Pay payment page shown to the user remains the same as the one-time payment page, without any subscription information. Could you please check if there is an issue with our parameters or if there is an issue with the merchantIdentifier being used? Here is the ApplePayRequestData that we are using. { "supportedMethods": "https://apple.com/apple-pay", "data": { "version": 3, "merchantIdentifier": "***", "merchantCapabilities": [ "supports3DS", "supportsCredit", "supportsDebit" ], "supportedNetworks": [ "visa", "masterCard" ], "countryCode": "US", "recurringPaymentRequest": { "paymentDescription": "A description of the recurring payment to display to the user in the payment sheet.", "regularBilling": { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" }, "trialBilling": { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, "billingAgreement": "A localized billing agreement displayed to the user in the payment sheet prior to the payment authorization.", "managementURL": "https://applepaydemo.apple.com", "tokenNotificationURL": "https://applepaydemo.apple.com" }, "additionalLineItems": [ { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" } ] }

Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hello, We are working on integrating billing into our dating app, targeted at the Russian market. Our main requirement is to support subscriptions with automatic renewal and cancellation. We understand that, according to App Store Review Guideline, all digital subscriptions should use Apple In-App Purchase (IAP). However, we are unsure how this applies in Russia, where some local regulations may limit the use of non-Russian payment processors, and where not all Russian bank cards are accepted by Apple. Our question is: -For iOS apps in Russia, is it strictly required to use Apple IAP for subscriptions? -Are there any approved exceptions allowing integration with local processors such as Robokassa or YooKassa? -How are other developers currently handling subscriptions for the Russian market? We want to ensure full compliance and avoid any risk of rejection or removal. Thank you in advance for any clarification. Best regards, Dan

We are implementing Apple Pay In-App Provisioning in our issuer iOS application and are encountering a HTTP 500 error returned from Apple servers during the provisioning flow. The issue occurs after generating the encrypted payload and attempting to complete the provisioning process. The Apple service responds with 500 Internal Server Error, preventing the card from being added to Wallet. We would appreciate assistance identifying whether this is caused by: • a payload formatting issue, • cryptographic material mismatch, • entitlement / configuration issue, • or a server-side issue. Environment Platform • iOS: 26.3.1 • Device: iPhone 13 mini • Xcode: 26.3.1 Apple Pay configuration • In-App Provisioning entitlement enabled • Issuer app authorized by Apple for provisioning • Payment Network: Mastercard • Token Service Provider (TSP): MDES Testing environment • Production • App distribution method: TestFlight Provisioning Flow Overview Our implementation follows the standard Apple Pay In-App Provisioning flow: 1. User taps Add to Apple Wallet in issuer app. 2. App presents PKAddPaymentPassViewController. 3. App receives: • Apple public certificates • nonce • nonceSignature 4. Issuer backend generates: • encryptedPassData • activationData • ephemeralPublicKey 5. These values are returned to the app. 6. App constructs PKAddPaymentPassRequest. 7. Wallet attempts provisioning. At this point the request fails and Apple servers return HTTP 500. We see this in the system console, with the phone having Wallet debugging profile installed. Checklist – Common Issues Verified Based on the Apple Pay In-App Provisioning demo guidance, we verified the following configuration items. Entitlements • com.apple.developer.payment-pass-provisioning enabled • Apple Pay capability enabled in Xcode • Correct Team ID and bundle configuration App configuration • PKAddPaymentPassViewController used for provisioning • PKAddPaymentPassViewControllerDelegate implemented • generateRequestWithCertificateChain implemented correctly Cryptographic data • encryptedPassData • activationData • ephemeralPublicKey All values are generated by our issuer backend and returned to the app Feedback ID: FB22249031 (In app provisioning error 500)

Hey, Please help us to know how to get our payments of sales with iOS app we have, since beginning, our amount is pending with them and despite sevarel attempts they are providing the real issue and solutions for matter. Please suggest how to fix this issue.

Hi everyone, Is there a way to check the integrity of the auto updating version of the Apple Pay JS SDK? SRI can only be used for the semantic version. Any help/suggestion is appreciated.

Hey everyone, hoping someone here has run into this before. I have a fully functional App Clip (com.didyoucatchit.app.Clip) linked to my main app (com.didyoucatchit.app). The Clip builds and runs perfectly, but I’m seeing issues trying to enable Apple Pay for it. When I try to link my Merchant ID under the “On Demand Install Capable” capability in the Apple Developer portal, I get this error: A relationship in the provided entity is not allowed for this request. The relationship 'undefined' can not be included in a 'bundleIdCapabilities' request. Here’s what I have already configured and confirmed: App Clip capabilities in Xcode include: Apple Pay Payment Processing Associated Domains (appclips:app.didyoucatchit.com) Provisioning profile includes: Apple Pay Payment Processing Associated Domains In-App Purchase On-Demand Install Capable Entitlements file for the Clip: <key>com.apple.developer.associated-domains</key> <array> <string>appclips:app.didyoucatchit.com</string> </array> <key>com.apple.developer.in-app-payments</key> <array> <string>merchant.com.didyoucatchit.app</string> </array> <key>com.apple.developer.parent-application-identifiers</key> <array> <string>$(AppIdentifierPrefix)com.didyoucatchit.app</string> </array> Merchant ID (merchant.com.didyoucatchit.app) is active and connected to Stripe Stripe Apple Pay configuration matches the same merchant ID and certificate Both provisioning profiles have been refreshed and downloaded However: The portal still throws the “relationship 'undefined'” error anytime I try to modify the Clip’s capabilities In testing, Apple Pay doesn’t show up as a payment option in the Clip (using Stripe’s Payment Element integration) Questions: Is this a known issue with the Developer portal when linking App Clips to merchant IDs? Is there a specific way to re-establish the parent–child relationship between the main app and the App Clip so the bundleIdCapabilities request includes the proper relationship JSON? Are there any additional configuration steps required when using Stripe for Apple Pay inside an App Clip? System Setup: Xcode: 16.2 (build 16C5032a) macOS: Sequoia 15.3.1 iOS: 18.5 (testing on physical device) Merchant ID: merchant.com.didyoucatchit.app Main App ID: com.didyoucatchit.app App Clip ID: com.didyoucatchit.app.Clip Any help or insight would be hugely appreciated Thanks in advance!

We have been informed by a third-party subscription tracking service(Adjust) that, due to the following specification of App Store Connect, it is not possible to connect an STG app (a non-published testing app) with their server: Specification: Since Apple’s API only allows access for apps that are already published, it is not possible to enable subscription tracking for iOS apps that are not yet published. Could you please confirm if our understanding of this specification is correct? Additionally, is there any method or recommended approach to verify subscription tracking behavior with an STG (non-published) app before the app is released? Thank you very much for your support.

Hello, I am developing an Apple Pay and In-App Provisioning integration for the bank where I work. All entitlements are properly configured, and we are integrated correctly with our Payment Network Operator (PNO). We are using PKAddPaymentPassViewControllerDelegate to handle the provisioning process. The flow progresses as expected up to the Terms and Conditions screen. However, after accepting the terms, the process fails with the message: "Could not add card." Upon checking the device logs using the Wallet profile configuration, I observed the following response from Apple's backend: Response: https://nc-pod10-smp-device.apple.com:443/broker/v4/devices/041315032816900221610987313158566F368A9CEBA1291E/cards/745f792b9d0644e5a6e713d54f505296/enable 500 Time profile: 1.80458 seconds { x-conversation-id = "6ec59a63424f4035915e32f22ea645e4" Vary = "accept-language" Content-Type = "application/json" x-pod = "nc-pod10" x-keystone-correlationid = "E3DD5A5A-FD18-4500-8570-2BD1334E281C" Date = "Thu, 17 Apr 2025 07:05:03 GMT" x-apay-service-response-details = "via_upstream" Content-Length = "49" x-envoy-upstream-service-time = "964" x-pod-region = "paymentpass.com.apple" } { errorCode = 40456; statusCode = 500; } This seems to indicate that the card enablement step is failing on the server side. Our internal systems have not logged any request failure from Apple at this step, which makes it difficult to pinpoint whether the issue is in the PNO integration, entitlement configuration, or something else. We are currently testing in a production environment on a physical device (not using sandbox), and provisioning flows are initiated through our iOS app using PKAddPaymentPassRequest. Could you please help us interpret error code 40456 and identify what steps we should take to resolve this issue? If needed, we can also provide the full device log and additional details. Thank you in advance for your support. Best regards, Mansur Bagwan

Basic information: The issuer has implemented the feature to active Apple Card via URL Verification. The feature implemented by issuer is supported both in the APP and Clips. When Apple queries the activation method from UnionPay, UnionPay returns the "URL" activation method to Apple. Additionally, the apple-app-site-association file has been correctly deployed, and the configuration for Universal Links has been completed. Both the APP and Clips have undergone testing for Universal Link calls. The desired experiece is that when the APP is installed, Apple Wallet launches the APP, and the user completes the activation within the APP, and if the APP is not installed, Apple Wallet calls Clips, and the user completes the activation in Clips. Problem description: Under iOS 17 and iOS 18, when triggering Apple Pay card activation, the APP or Clips can be called as expected, and the activation can be completed well. However, Under iOS 26, regardless of whether the APP is installed, under the same circumstances, an internal browser within Apple Wallet opens to access the H5 page corresponding to the URL, instead of redirecting to the APP or Clips. Please assist in confirming whether this is a new feature of iOS 26 and how the same user experience can be achieved.