Hi team, may I know how I can access the report for the Safari Smart App Banner here please? We want to know how many people taps to views or install the app from that specific banner. Please advise on this. Thank you.

Summary: We are facing a serious issue on iPhone where multiple passkey authentication problems occur when accessing passkey-enabled login pages via shortcuts placed on the iPhone Home Screen. These issues may also occur when opening the same pages directly in a standard browser window. However, launching the login pages from a Home Screen shortcut appears to increase the likelihood of encountering these issues. Affected Services (examples, not exhaustive): Amazon GitHub Adobe Observed Issues: Issue 1: A passkey authentication dialog/popup shows two times without any user operation: What happens due to this issue: Login does not complete after the first passkey authentication. A second passkey authentication UI automatically appears. Completing or canceling the second authentication allows the login to proceed. Issue 2: Login remains stuck until the user manually invokes passkey again What happens due to this issue: The login page does not advance after the first authentication. The user must tap the ID/username field again to manually trigger the passkey UI. Completing the second authentication enables login. Issue 3: Automatic second authentication occurs, but login still fails What happens due to this issue: A second automatic authentication UI appears. Login still does not complete. Tapping the ID field no longer opens the passkey UI; instead, the password auto-fill panel appears. Passkey login becomes impossible. Observed reproduction steps (not guaranteed but most consistently observed): On iPhone, navigate to a passkey-enabled login page (e.g., Amazon, GitHub, Adobe) using a browser. Create a shortcut from the browser's share menu and place it on the Home Screen. Launch the login page from the Home Screen shortcut. Tap the ID/username field to invoke the passkey prompt. Complete passkey authentication. → One of the issues described above occurs. Environment: Device: iPhone SE OS: iOS 18.6.2

I have an iOS app that generates and renders a custom HTML document inside a UIWebView. After updating a device to iOS 26, the same HTML is rendered with noticeably smaller fonts compared to previous iOS versions. No code or HTML changes were made. Context HTML is generated dynamically and rendered in a UIWebView The HTML is embedded inside a custom XML wrapper The issue happens only on iOS 26 Earlier iOS versions render the font size correctly

We confirmed a problem at Safari on iPadOS 18.2 or after version. For confirmation, we made a HTML document (see below HTML1) what include ‘method="POST" target="_blank"’ and tested the form however server received GET method and there is no parameter, server did not receive “id” parameter. We confirmed that fact in captured packet and log file that on the server. HTML1: We also made another HTML document (see below HTML2) what include submit button, but the server received GET method as above. HTML2: And we also confirmed that it behaves differently depending on the network environment. If the form targets a name that does not exist (ex. target=” A12345”), behaves differently http or https. http: Safari opened new tag, but the server received GET method. Normally, Safari open new tag and the server receive POST method. https: Safari opened new tag, and the server received POST method. It is normally. If the form targets ‘_blank’, the server received GET method on http or https both. We think Safari change the method POST to GET and delete parameters. It is not conformed to the HTML specification if is that true. We confirmed it was not happened at Safari on iPadOS 17.4, and Windows PC (Edge, Chrome). The method what the server received is POST. We find same problem in Apple Support Community (see below URL). https://discussionsjapan.apple.com/thread/255987615 (Described in Japanese) Is it a bug in Safari on iPadOS 18.2 or after version? Do you have plan to fix? Or if fixed the bug, when do you release fixed version.

I am using the native SwiftUI WebView and WebPage APIs (iOS 26+) and would like to implement file download functionality using the native SwiftUI WebView. However, I have not been able to find any APIs equivalent to WKDownload. In WKWebView, the WKDownload API can be used to handle downloads. I am looking for a similar API or recommended approach in the native SwiftUI WebView that would allow downloading files. If anyone has guidance or suggestions on how to implement this, I would appreciate your help.

Doc URL: https://aninterestingwebsite.com/documentation/applepayontheweb/requesting-an-apple-pay-payment-session How can I send a POST request using PHP, and what certificates are required? Currently, I have downloaded the following files on the backend: merchant_id.cer, apple_pay.cer, and a local cert.p12 file This my code: But,run error:cURL Error: unable to set private key file: '***/private.pem' type PEM%

I want to confirm the specifications and behavior of Safari. We have a system built on Microsoft Azure that uses Azure AD B2C for authentication. When we logging in, there is a phone authentication feature where a call is made to the registered phone number. However, this phone authentication does not work properly only on iPhone's Safari. The specific situation is listed below: When performing phone authentication on iPhone's Safari, a call is made from Azure AD B2C, and pressing the # button on the Safari screen can be done. But then, it transitions to an error screen. We tried multiple iPhone devices and multiple iOS versions, but the result was the same. But when accessing the system on a PC, and performing phone authentication, it works without any errors. Also when we use browsers other than Safari (for example, Google Chrome and Firefox) on the iPhone, the phone authentication works without any errors, too. Even with Safari, if the device displaying the login screen and the device making the call are different, phone authentication works without any errors, too.(it fails if they are the same device). We reached out Microsoft about this issue, and they responded that: The Azure resource called FrontDoor at the front end of Azure AD B2C supports the HTTP/2 protocol, and HTTP/2 protocol is used in communication with Safari. In Safari's HTTP/2 communication, when a call is received while the screen is displayed, a reset packet is sent to the web server (in this case, the web server is FrontDoor). This interrupts the session, causing a session termination error on the Azure AD B2C side, and phone authentication fails. Therefore, we would like to ask you the following two points: In HTTP/2 communication, does the Safari browser send a reset packet to the web server when it receives a phone call? If so, what is the cause of this behavior? And are there any measures to prevent the reset packet from being sent?

Scenario Overview: In our app, we open an in-app browser to complete a third-party consent flow. The sequence is: App → Website A (set cookie and redirect) → Google → Website A (check cookie) → App After upgrading the app, the first consent attempt fails because the cookie cannot be written, causing the check cookie step to fail. However, if we use the native Safari browser, this issue does not occur. Observed Behavior: Scenario Result Upgrade app → Consent ❌ Fail Upgrade app → Consent fail → Consent again immediately ✅ Pass Upgrade app → Consent fail → Upgrade again after 1–2h → Consent ✅ Pass Upgrade app → Consent fail → Upgrade again after 1d → Consent ❌ Fail Install a new app → Consent ✅ Pass Upgrade app → Consent, cancel flow → Consent again ✅ Pass Install new app → Wait for upgrade → Upgrade app → Consent ✅ Pass Install new app → Wait 1–2h → Upgrade app → Consent ✅ Pass Investigation: From Safari documentation, this seems related to Intelligent Tracking Prevention (ITP), which restricts cross-site cookie behavior during first-party interactions. However, I haven’t found a clear mitigation strategy yet. Question: Has anyone encountered similar issues with Safari ITP after app upgrades? Are there recommended approaches to ensure cookies persist across this redirect flow?

We would like to confirm the unsubscribe flow related to recurring payment processing. When a user unsubscribes, does your system send any notification to us? If no notification is provided, we will not be able to detect the unsubscribe event and will continue to send recurring payment requests to the gateway periodically. Would this cause any issues? We would appreciate it if you could share the specific unsubscribe flow with us. Thank you in advance for your support.

Hi! I'm working on a web extension for Safari and I need to send messages from the containing application to JavaScript. For this I use the method class func dispatchMessage( withName messageName: String, toExtensionWithIdentifier identifier: String, userInfo: [String : Any]? = nil ) async throws of the SFSafariApplication class. If the site is opened in Safari in normal mode, everything works as expected. However, if the site is "docked", the messages are not transmitted to this "Web App".

Hello from Leipzig, Germany! I noticed that when vertically scrolling in Safari 26 on my Mac, the content of the website I am currently working on is visible in the tab and URL bar with a liquid glass effect. I then looked at various other websites. Some websites have an opaque top bar. Some websites have a transparent top bar where content is visible when scrolling. On the Apple website, the top bar is opaque in light mode but transparent in dark mode. Unfortunately, I can't find a way to control this behavior. Has anyone found out more about this?

We would appreciate it if you could provide the detailed flow of recurring payments and the unsubscribe process using the Apple Pay JS API, specifically in cases where the PSP decrypts the Apple Pay token before sending it to the payment gateway. Thank you very much for your kind assistance.

Bit of an odd one here, just keen to understand if it’s just me or a more generic issue. For all other apps, I can drag the icon from the dock to place into stage manager left, centre or right. However when I try to do the same with Safari (and only Safari), it just doesn’t work at all. I can repeat this 100%, has been an issue with 26.0, 26.1 and now 26.2. Can confirm this isn’t a problem on my 11” M4 iPad pro running same O/S. Here is a video showing the issue (YouTube) https://youtu.be/0WBGBZVHsfs

Hi there I've been having trouble finding any details around how safari is supposed to behave when a FairPlay license expires. My assumption was that the video segments would stop getting decrypted and playback would stop, however I just see that the playback continues like nothing has happened. I've setup the "fps_safari_has_key_renewal.html" sample code from the Fairplay SDK and got encrypted playback working. The renewal method also appears to work. However, if I don't issue a renew call, or if I wait several minutes after the renew has succeeded the video never stops (my license is set with a 1 minute expiry so I can test this quickly). I've also observed that the MediaKeySession expiration property is always set to NaN even though my license has an expiry. I've tried with both Lease and Rental expiries set in the license (separately AND at the same time in separate tests). I'm using EZDRM as my drm provider. Just looking for some feedback on if this is supposed to work this way in safari or if license expiry isn't supported in safari. Thanks!

Hello, can't find a better Forum and after all this is Apple Support here? Seems starting with iOS 26.2 RC2 our Newsletter is no longer rendered 'responsive' so with unuseable small font. Anybody any suggestion? Or maybe @apple fix the bug? Where would I even start to debug this? I don't have any iphone at hand so i only got screenshots from users. Our where can i contact the actual apple support? correct: invalid:

How can I set it as a formal payment environment if I can make the payment now without any deduction?

Cross posting from Spatial Computing, apologies if this is not the appropriate forum. The purpose is to create a simple web-based gallery of spatial photos and videos using static html files. I have successfully displayed spatial photos using the img tag and IMG.heic files. I can tap and hold the image to bring up the contextual menu and from there select View Spatial Photo. Is there any way to add a control to the image, like a link or overlay on the image itself, that a user can simply tap to show the image in 3D? And how to host a (small!) video file on a web page without going through a CDN/streaming service? Sample html would be much appreciated.

Hello, We are setting up Apple Sign In in one of our non production websites but we keep getting a "oauth code says expired or revoked" error. We have created a brand new service ID and key for this but are still getting this error.

Create shortcut to open chrome with url and put it on the desktop. Tap the shortcut. Tap the username text field. When launching Safari from an iOS shortcut on an iOS device with a valid passkey registered, the passkey suggestion does not appear; instead, the password suggestion appears sometimes.

Hi Team, Our team member trying to enroll through the invite in Apple Developer portal Note: Phone number is valid but still we are getting this error. It happens in all the browser