Hello, How do I find the apple music catalogID for songs in a apple music playlist? Im building an iOS app that uses MusicKit/Apple Music API. For this example, you can assume that my iOS app simply allows users to upload their apple music playlists. And when users open a specific playlist, I want to find the catalogID for each song. Currently all the songs are returning song IDs in this format “i.PkdJvPXI2AJgm8”. I believe these are libraryIDs, not catalogIDs. I’d like to find a front end solution using MusicKit. But perhaps a back end solution using the Apple Music Rest API is required. Any recommendations would be appreciated!

I'm developing a video capture app using AVFoundation, designed specifically for use on a boat pylon to record slalom water skiing. This setup involves considerable vibration. As you may know, the OIS that Apple began adding to lenses since the iPhone 7 is actually very problematic in high vibration circumstances, ironically creating very shaky video, whereas lenses without OIS produce perfectly stable video. Because of this, up until iPhone 14, the solution for my app was simply to use the Selfie lens, which did not have OIS. Starting with iPhone 14 through iPhone 16 (non-Pro models), technical specs suggest the selfie lens still does not include OIS. However, I’m still seeing the same kind of shaky video behavior I see on OIS-equipped lenses. The one hardware change I see in this camera module is the addition of PDAF (Phase Detection Autofocus), so that is my best guess as to what is causing the unstable video. 1- Does that make any sense - that in high vibration settings, PDAF could create unstable video in the same way that OIS does? Or could it be something else that was changed between the iPhone 13 and 14 Selfie lens? Thinking that the issue was PDAF, I figured that if I enabled my app to set a Manual Focus level, that ought to circumvent PDAF (expecting that if a lens is manually focusing, it can’t also be autofocusing via PDAF). However, even with manual focus locked via AVCaptureDevice in my app, on the Selfie lens of an iPhone 16, the video still comes out very shaky, basically unusable. I also tested with the built-in Apple Camera app (using the press-and-hold to lock focus and exposure) and another 3rd party camera app to lock focus, all with the same results, so it's not that my app just isn't correctly doing manual focus. So I'm stuck with these questions: 2- Does the selfie camera on iPhones 14–16 use PDAF even when focus is set to locked/manual mode? 3- Is there any way in AVFoundation to disable or suppress PDAF during video recording (e.g., a flag, device format setting, or private API)? 4- Is PDAF behavior or suppression documented or controllable via AVCaptureDevice or any related class? 5- If no control of PDAF is available, are there any best practices for stabilizing or smoothing this effect programmatically? Note that I also have set my app to use the most aggressive form of stabilization available, so it defaults to .cinematicExtendedEnhanced, if that’s not available, then .cinematicExtended, etc. On the 16 Selfie lens, it is using .cinematicExtended. As an additional question: 6- Would those be the most appropriate stabilization settings for a high vibration environment, and if not, what would be best?

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

Hi everyone! Here's what I observed so far: On device it's reproducible on iOS/iPadOS18.5, but works on iPadOS17.7. On iPhone16 iOS 18.5 simulator that I was extensively using for development it was reproducible until I reset content and settings. On iPhone 16 iOS18.4 simulator, which was also used a lot during development it still works always, so I tend to think it's 18.5 issue. Setting config.websiteDataStore = .nonPersistent() doesn't help. Cleaning WKWebsiteDataStore doesn't help. It works fine using direct URL from the embedded code (see the code below). Can someone provide some insight on how this could be fixed? Here's the code: import SwiftUI import WebKit @main struct IGVideoApp: App { var body: some Scene { WindowGroup { WebView() } } } private struct WebView: UIViewRepresentable { func makeUIView(context: Context) -> WKWebView { let config = WKWebViewConfiguration() config.allowsInlineMediaPlayback = true return .init(frame: .zero, configuration: config) } func updateUIView(_ uiView: WKWebView, context: Context) { let urlString = "https://www.instagram.com/reel/DKHFOGct3z7/?utm_source=ig_embed&amp;utm_campaign=loading" /// It works when loading from the data-instgrm-permalink URL directly // uiView.load(.init(url: .init(string: "\(urlString)")!)) /// It doesn't work whith embedding /// Note: the code part for embedding (<blockquote>...</blockquote>) is taken from my /// Instagram post (https://www.instagram.com/p/DKHFOGct3z7/) /// and stripped down. The urlString was also extracted for demonstration of direct loading. let string = """ <!doctype html> <meta charset="utf-8" /> <meta name="viewport" content="width=device-width, initial-scale=1"> <html> <head /> <body style="background-color:black; margin:0px"> <blockquote class="instagram-media" data-instgrm-captioned data-instgrm-version="14" data-instgrm-permalink="\(urlString)"> </blockquote> <script async src="https://www.instagram.com/embed.js"></script> </body> </html> """ uiView.loadHTMLString(string, baseURL: .init(string: "https://www.instagram.com")) } }

Use case: When SharePlay -ing a fully immersive 3D scene (e.g. a virtual stage), I would like to shine lights on specific Personas, so they show up brighter when someone in the scene is recording the feed (think a camera person in the scene wearing Vision Pro). Note: This spotlight effect only needs to render in the camera person's headset and does NOT need to be journaled or shared. Before I dive into this, my technical question: Can environmental and/or scene lighting affect Persona brightness in a SharePlay? If not, is there a way to programmatically make Personas "brighter" when recording? My screen recordings always seem to turn out darker than what's rendered in environment, and manually adjusting the contrast tends to blow out the details in a Persona's face (especially in visionOS 26).

Hi Team, We are using AVFoundation to read metadata from a stream and have noticed some delay between when the stream provides metadata and when the app receives it. Could someone from the team advise on ways to reduce this? Thanks

I'm reaching out regarding a recurring issue I'm experiencing with MusicKit developer tokens. I'm using a valid .p8 private key to sign JWTs for Apple MusicKit integration. Each token I generate includes the appropriate claims (iss, iat, exp) and is signed with the ES256 algorithm, with an expiration date set approximately 6 months ahead. Everything works as expected immediately after generating the token. However, after a few days, the same JWT (still well within its expiration period) suddenly begins returning invalid/unauthorized responses when used in Postman and other API clients. Importantly: I did not delete or revoke the .p8 key during this time. I verified the JWT contains valid claims and a proper structure. The issue consistently resolves only when I create a new .p8 file and regenerate a fresh JWT with it—after which the cycle repeats. This issue occurs even when the environment and app identifiers remain unchanged. I would greatly appreciate it if you could help me understand: Why these tokens become invalid after a few days, despite having a long exp value and an unchanged key. Whether there's any automatic revocation or timeout policy on .p8 keys that could explain this behavior. If there's a better way to maintain long-lived developer tokens without requiring new .p8 key generation every few days. Thank you for your help and clarification on this issue. Best regards, Liad Altif

I tried to modify the AVCam sample code by copying the code here https://aninterestingwebsite.com/documentation/avfoundation/adopting-smart-framing-in-your-camera-app#Configure-the-smart-framing-monitor smart framing monitors I can ensure the activeformat supports smart framing, but the supported frames in monitor is always nil. In my another project it has supported value, but the observation has never been triggered, then I tried to keep printing the recommended frame, it's always nil. Could the engineer embed the code into AVCam rather than posting a few code pieces?

(Note: this is part 1 of a 3 part posting. See Part 2 or Part 3) At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Camera & Photos. WWDC25 Camera & Photos group lab ran for one hour at 6 PM PST on Tuesday June 10th, 2025 Introductory kick-off questions Question 1 Tell us a little about the new AVFoundation Capture APIs we've made available in the new iOS 26 developer preview? Cinematic Capture API (strong/weak focus, tracking focus)(scene monitoring)(simulated aperture)(dog/cat heads/groupIDs) Camera Controls and AirPod Stem Clicks Spatial Audio and Studio Quality AirPod Mics in Camera Lens Smudge Detection Exposure and Focus Rect of Interest Question 2 I built QR code scanning into my app, but on newer iPhones I have to hold the phone very far away from the QR code, otherwise the image is blurry and it doesn't scan. Why is this happening and how can I fix it? Every year, the cameras get better and better as we push the state of the art on iPhone photography and videography. This sometimes results in changes to the characteristics of the lenses. min focus distance newer phones have multiple lenses automatic switching behavior Use virtual device like the builtInDualWide or built in Triple, rather than just the builtInWide Set the videoZoomFactor to 2. You're done. Question 3 Last year, we saw some exciting new APIs introduced in AVFoundation in the health space. With Constant Color photography, developers can take pictures that have constant color regardless of ambient lighting. There are some further advancements this year. Davide, could you tell us about them? constant color photography is mean to remove the "tone mapping" applied to photograph captured with camera app, usually incldsuing artistic intent, and instead try to be a close as possible to the real color of the scene, regardless of the illumination constant color images could be captured in HEIF anf JPEG laste year. this year we are adding Support for the DICOM medical imaging photo format. It is a fomrat used by the health industry to store images related to medical subjects like MRI, skin problems, xray and so on. It's writable and also readable format on all OS26, supported through AVCapturePhotoOutput APIs and through the coregraphics api. for coregrapphics there is a new DICOM entry in the property dictionary which includes all the dicom availbale and defined propertie in a file. finder will also display all those in the info panel (Address why a developer would want to use it) - not for regualr picture taking apps. for those HEIF and JPEG are the preferred delivery format. use dicom if your app produces output that are health related, that you can also share with health providers or your doctors Main session developer questions Question 1 LiDAR vs. Dual Camera depth generation: Which resolution does the LiDAR sensor natively have (iPhone 16 Pro) and when to prefer LiDAR over Dual Camera? Both report formats with output resolutions (we don't advertise sensor resolution) Lidar vs Dual, etc: Lidar: Best for absolute depth, real world scale and computer vision Dual, etc: relative, disparity-based, less power, photo effects Also see: 2022 WWDC session "Discovery advancements in iOS camera capture: Depth, focus and multitasking" Question 2 Can true depth and lidar camera run at 60fps? Lidar can do 30fps (edited) Front true depth can do 60fps. Question 3 What’s the first class way to use PhotoKit to reimplement a high performance photo grid? We’ve been using a LazyVGrid and the photos caching manager, but are never able to hit the holy trinity (60hz, efficient memory footprint, minimal flashes of placeholder/empty cells) use the PHCachingImageManager to get media content delivered before you need to display it specify the size you need for grid sized display set the options PHVideoRequestOptionsDeliveryModeFastFormat, PHImageRequestOptionsDeliveryModeFastFormat and PHImageRequestOptionsResizeModeFast Question 4 For rending live preview of video stream, Is there performance overhead from using async and Swift UI for image updates vs UIViewRepresentable + AVCaptureVideoPreviewLayer.self? AVCaptureVideoPreviewLayer is the most efficient display path Use VDO + AVSampleBufferDisplayLayer if you need to modify the image data Swift UI image is optimized for static image content Question 5 Is there a way to configure the AVFoundation BuiltInLiDarDepthCamera mode to provide a depth map as accurate as ARKit at close range? The AVCaptureDepthDataOutput supports filtering that reduces noise and fills in invalid values. Consider using this for smoother depth maps Question 6 Pyramid-based photo editing in core image (such as adobe camera raw highlights and shadows)? First off you may want to look a the builtin filter called CIHighlightShadowAdjust Also the noise reduction in the CIRawFilter uses a pyramid-based algorithm. You can also write your own pyramid-based algorithms by taking an input image: down sample it by two multiply times using imageByApplyingAffineTransform apply additional CIKernels to each downsampled image as needed. use a custom CIKernel to combine the results. Question 7 Is the best way to integrate an in-app camera for a “non-camera” app UIImagePickerController? Yes, UIImagePickerController provides system-provided UI for capturing photos and movies. Question 8 Hello, my question is on Deferred Photo Processing? Say I have a photo capture app that adds a CIFilter to the capture. How can I take advantage of Deferred Photo Processing? Since I don’t know how to detect when the deferred captured photo is ready CIFilter can be called on the final at that point Photo will have to be re-inserted into the Photo library as adjustment Question 9 For shipping photo style assets in the app that need transparency what is the best format to use? JPEG2000? will moving to this save a lot of space comapred to PNG or other options? If you want lossless compression PNG is good and supports unpremutiplied alpha If you want lossy compression HEIF supports premutiplied or unpremutiplied alpha (Note: this is part 1 of a 3 part posting. See Part 2 or Part 3)

Hello, I want to know if there are any restrictions with MusicKit to be used in a mobile app to be able to manipulate audio with an EQ on tracks coming from Apple Music, without modifying the actual track structure/data of course, just the audio output.

(Note: this is part 3 of a 3 part posting. See Part 1 or Part 2) At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Camera & Photos. WWDC25 Camera & Photos group lab ran for one hour at 6 PM PST on Tuesday June 10th, 2025 Question 24 What’s the best approach for optimizing barcode scanning using AVFoundation or Vision in low-light or angled scenarios Turn on flash in low-light scenarios Lower framerate to improve exposure and reduce noise Wait until the capture is in focus/notify your user that they need to get closer Question 25 Recent iPhone models introduced macro mode which automatically switch between lenses to take into account of the focal distance difference. Is there official API to implement this, or should I implement them myself using LiDAR values. Using builtInTripleCamera and builtInDualWideCamera will automatically switch to macro when available Question 26 Is there a way to quickly create a thumbnail after the user selects an image with PhotosPicker? File provider API Additional questions from the WWDC25 in-person labs that occurred later in the WWDC week Question 1 When should I build my custom photo picker instead of using the system one? Always start with the system picker -> try embeddable customization APIs -> fallback to custom picker for very special needs Question 2 I'm building a new camera app for pros and I want to give my users the most un-processed image possible, and the most control over the capture as possible. How can I do that with AVCapture? If stills, Brief Bayer RAW capture overview, or Pro RAW if you want Apple's processing and dynamic range If video, talk about prores LOG. Custom exposure settings are available throguh the apis maybe global/local tonemapping discussion?

Queria saber quando lança o IOS 26 oficialmente I wanted to know when iOS 26 will be officially released.

I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &amp;prop, 0, nullptr, &amp;dataSize, &amp;pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

Hi, I’m building a PPG-based heart rate feature where the user places their finger over the rear telephoto camera. On iPhone 16 Pro Max, I'm explicitly selecting the telephoto lens like this: videoDevice = AVCaptureDevice.default(.builtInTelephotoCamera, for: .video, position: .back) And trying to lock it: if #available(iOS 15.0, *), device.activePrimaryConstituentDeviceSwitchingBehavior != .unsupported { try? device.lockForConfiguration() device.setPrimaryConstituentDeviceSwitchingBehavior(.locked, restrictedSwitchingBehaviorConditions: []) device.unlockForConfiguration() } I also lock everything else to prevent dynamic changes: try device.lockForConfiguration() device.focusMode = .locked device.exposureMode = .locked device.whiteBalanceMode = .locked device.videoZoomFactor = 1.0 device.automaticallyEnablesLowLightBoostWhenAvailable = false device.automaticallyAdjustsVideoHDREnabled = false device.unlockForConfiguration() Despite this, the camera still switches to another lens, especially under different lighting, even though the user’s finger fully covers the lens. Questions: How can I completely prevent lens switching in this scenario? Would using videoZoomFactor = 3.0 or 5.0 better enforce use of the telephoto lens? Thanks! Gal

Hi everyone, I noticed that Apple recently added a few new beta sample codes related to video encoding: Encoding video for low-latency conferencing Encoding video for live streaming While experimenting with H.264 encoding, I came across some questions regarding certain configurations: When I enable kVTVideoEncoderSpecification_EnableLowLatencyRateControl, is it still possible to use kVTCompressionPropertyKey_VariableBitRate? In my tests, I get an error. It also seems that kVTVideoEncoderSpecification_EnableLowLatencyRateControl cannot be used together with kVTCompressionPropertyKey_ConstantBitRate when encoding H264. Is that expected? When using kVTCompressionPropertyKey_ConstantBitRate with kVTCompressionPropertyKey_MaxKeyFrameInterval set to 2, the encoder outputs only keyframes, and the frame size keeps increasing, which doesn’t seem like the intended behavior. Regarding the following code from the sample: let byteLimit = (Double(bitrate) / 8) * 1.5 as CFNumber let secLimit = Double(1.0) as CFNumber let limitsArray = [ byteLimit, secLimit ] as CFArray // Each 1 second limit byte as bitrate err = VTSessionSetProperty(session, key: kVTCompressionPropertyKey_DataRateLimits, value: limitsArray) This DataRateLimits setting doesn’t seem to have any effect in my tests. Whether I set it or not, the values remain unchanged. Since the documentation on aninterestingwebsite.com/documentation doesn’t clearly explain these cases, I’d like to ask if anyone has insights or recommendations about the proper usage of these settings. Thanks in advance!

While validating a Dolby Vision Profile 5 playlist in CMAF format (with segments in MP4), the Media Stream Validator reported the following error in the MUXT-FIX-ISSUES list: However, the playlist correctly specifies Dolby Vision Profile 5 in both the EXT-X-STREAM-INF and EXT-X-I-STREAM-INF tags. Playlist: #EXTM3U #EXT-X-VERSION:8 #EXT-X-INDEPENDENT-SEGMENTS #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio-ec3",LANGUAGE="und",NAME="Undetermined",AUTOSELECT=YES,CHANNELS="6",URI="var14711339/aud1257/playlist.m3u8?device_profile=hls&seg_size=6&cmaf=1" #EXT-X-STREAM-INF:BANDWIDTH=14680000,AVERAGE-BANDWIDTH=14676380,VIDEO-RANGE=PQ,CODECS="ec-3,dvh1.05.06",RESOLUTION=3840x2160,AUDIO="audio-ec3" var14711339/vid/playlist.m3u8?device_profile=hls&seg_size=6&cmaf=1 #EXT-X-I-FRAME-STREAM-INF:BANDWIDTH=1419881,URI="trk14711339/playlist.m3u8?device_profile=hls&cmaf=1",VIDEO-RANGE=PQ,CODECS="dvh1.05.06",RESOLUTION=3840x2160 Could you please review this and clarify: Why is the Media Stream Validator reporting this error, even though the playlist correctly includes Dolby Vision Profile 5 parameters in CMAF format? Why is this error not reported when using a playlist with TS segments instead of CMAF (MP4)?

I bought two "Apple USB-C to Headphone Jack Adapters". Upon closer inspection, they seems to be of different generations: The one with product ID 0x110a on top is working fine. The one with product ID 0x110b has two issues: There is a short but loud click noise on the headphone when I connect it to the iPad. When I play audio using AVAudioPlayer the first half of a second or so is cut off. Here's how I'm playing the audio: audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.delegate = self audioPlayer?.prepareToPlay() audioPlayer?.play() Is this a known issue? Am I doing something wrong?

This is my native module code implementation I'm getting base64 encoded string from server and passing this to my native module of pcm player to play audio App.tsx PcmPlayer.writeChunk(e.data); PcmPlayer.swift import AVFoundation @objc(PcmPlayer) class PcmPlayer: RCTEventEmitter { private var engine: AVAudioEngine? private var playerNode: AVAudioPlayerNode? private var format: AVAudioFormat? private var bufferQueue = [Data]() private var isPlaying = false private var hasEnded = false private var scheduledBufferCount = 0 private let minBufferBytes = 50000 private let pcmQueue = DispatchQueue(label: "pcm.queue") override init() { super.init() } override func supportedEvents() -> [String]! { return ["onStatus", "onMessage"] } @objc(initPlayer:channels:bitsPerSample:) func initPlayer(_ sampleRate: NSNumber, channels: NSNumber, bitsPerSample: NSNumber) { pcmQueue.async { self.stopInternal() let session = AVAudioSession.sharedInstance() do { try session.setCategory(.playback, mode: .default, options: []) try session.setActive(true, options: .notifyOthersOnDeactivation) try session.setMode(.default) print("🔈 Audio session active. Output route:", session.currentRoute.outputs) } catch { print("❌ Audio session setup failed:", error) return } self.engine = AVAudioEngine() self.playerNode = AVAudioPlayerNode() guard let engine = self.engine, let playerNode = self.playerNode else { print("❌ Engine or playerNode is nil") return } engine.attach(playerNode) self.format = AVAudioFormat(commonFormat: .pcmFormatFloat32, sampleRate: sampleRate.doubleValue, channels: AVAudioChannelCount(channels.uintValue), interleaved: false) guard let format = self.format else { print("❌ Failed to create AVAudioFormat") return } engine.connect(playerNode, to: engine.mainMixerNode, format: format) do { try engine.start() playerNode.play() engine.mainMixerNode.outputVolume = 1.0 print("✅ AVAudioEngine started with format:", format) } catch { print("❌ Engine start failed:", error) } self.hasEnded = false } } @objc(writeChunk:) func writeChunk(_ base64Pcm: String) { pcmQueue.async { guard base64Pcm.count >= 10 else { print("⚠️ Skipping short base64 string") return } var padded = base64Pcm let mod4 = base64Pcm.count % 4 if mod4 > 0 { padded += String(repeating: "=", count: 4 - mod4) } guard let data = Data(base64Encoded: padded, options: .ignoreUnknownCharacters) else { print("❌ Failed to decode base64") return } self.bufferQueue.append(data) print("📥 Received PCM chunk (\(data.count) bytes)") print("📥 writeChunk called. isPlaying=\(self.isPlaying), bufferQueue.count=\(self.bufferQueue.count)") if !self.isPlaying { self.isPlaying = true self.waitForBufferAndStartPlayback() } else if self.scheduledBufferCount == 0 { self.isPlaying = true self.waitForBufferAndStartPlayback() } } } private func waitForBufferAndStartPlayback() { DispatchQueue.global().async { while self.queueSize() < self.minBufferBytes && !self.hasEnded { Thread.sleep(forTimeInterval: 0.01) } self.writeLoop() } } private func writeLoop() { DispatchQueue.global().async { writeLoop: while self.isPlaying { if self.bufferQueue.isEmpty { for _ in 0..<100 { Thread.sleep(forTimeInterval: 0.01) if !self.bufferQueue.isEmpty { break } } if self.bufferQueue.isEmpty { print("🔇 No more data to play after waiting") self.isPlaying = false break writeLoop } } var data: Data? self.pcmQueue.sync { if !self.bufferQueue.isEmpty { data = self.bufferQueue.removeFirst() } } guard let chunk = data else { print("⚠️ No data to process") continue } if let buffer = self.pcmBufferFromData(chunk) { self.scheduledBufferCount += 1 self.playerNode?.scheduleBuffer(buffer, completionHandler: { self.pcmQueue.async { self.scheduledBufferCount -= 1 if self.bufferQueue.isEmpty && self.scheduledBufferCount == 0 { print("ℹ️ Playback idle - waiting for more data") self.isPlaying = false } } }) } } } } private func pcmBufferFromData(_ data: Data) -> AVAudioPCMBuffer? { guard let format = self.format else { return nil } let frameCount = UInt32(data.count / 2) guard let buffer = AVAudioPCMBuffer(pcmFormat: format, frameCapacity: frameCount) else { print("❌ Failed to create AVAudioPCMBuffer") return nil } buffer.frameLength = frameCount guard let floatChannelData = buffer.floatChannelData?[0] else { print("❌ floatChannelData is nil") return nil } data.withUnsafeBytes { (rawBuffer: UnsafeRawBufferPointer) in let int16Buffer = rawBuffer.bindMemory(to: Int16.self) let count = min(int16Buffer.count, Int(frameCount)) for i in 0..<count { floatChannelData[i] = Float32(int16Buffer[i]) / Float32(Int16.max) } } return buffer } @objc(stopPlayer) func stopPlayer() { pcmQueue.async { self.stopInternal() } } private func stopInternal() { print("🛑 stopInternal called") self.playerNode?.stop() self.engine?.stop() self.engine?.reset() self.playerNode = nil self.engine = nil self.format = nil self.bufferQueue.removeAll() self.isPlaying = false self.hasEnded = true self.scheduledBufferCount = 0 } @objc(canWrite:rejecter:) func canWrite(_ resolve: @escaping RCTPromiseResolveBlock, rejecter reject: RCTPromiseRejectBlock) { pcmQueue.async { resolve(self.bufferQueue.count < 20) } } @objc(flushPlayer:rejecter:) func flushPlayer(_ resolve: @escaping RCTPromiseResolveBlock, rejecter reject: RCTPromiseRejectBlock) { pcmQueue.async { self.bufferQueue.removeAll() resolve(nil) } } @objc static override func requiresMainQueueSetup() -> Bool { return false } private func queueSize() -> Int { return pcmQueue.sync { return self.bufferQueue.reduce(0) { $0 + $1.count } } } } I couldn't able to hear any audio via my real iOS device also it is working fine on emulator.

Add RPSystemBroadcastPickerView to the app, After clicking, no method of SampleHandler is triggered