Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

I'm encountering numerous crashes involving the com.apple.coreaudio.AQClient thread on our application. The crash details are as follows: #10 com.apple.coreaudio.AQClient SIGSEGV SEGV_ACCERR 0 libobjc.A.dylib _objc_msgSend + 44 1 AudioToolbox ClientMessageHandler::PropertyChanged(unsigned int) + 872 2 AudioToolbox ClientAudioQueue::FetchAndDeliverPendingCallbacks(unsigned int) + 924 3 AudioToolbox __XCallbackNotificationsAvailable + 212 4 libAudioToolboxUtility.dylib _mshMIGPerform + 260 5 CoreFoundation ___CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 56 6 CoreFoundation ___CFRunLoopDoSource1 + 596 7 CoreFoundation ___CFRunLoopRun + 2392 8 CoreFoundation _CFRunLoopRunSpecific + 572 9 AudioToolbox CADeprecated::GenericRunLoopThread::Entry(void*) + 156 10 libAudioToolboxUtility.dylib CADeprecated::CAPThread::Entry(CADeprecated::CAPThread*) + 88 11 libsystem_pthread.dylib __pthread_start + 116 All these crashes occur on system versions below iOS/iPadOS 17, primarily when the device's available RAM is low. What steps can I take to resolve this issue? Any insights would be greatly appreciated!

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

I have an AUv3 plugin which uses an FFT - which requires n samples before it can produce any output - so, depending on the relation between the host's buffer size and the FFT window size, it may receive a several buffers of samples, producing no output, and then dumping out what it has once a sufficient number of samples have been received. This means that output is produced in fits and starts, in batches that match the FFT size (modulo oversampling) - e.g. if being fed buffers of 256 samples with an fft size of 1024, the output buffer sizes will be 0 for the first 3 buffers, and upon the fourth, the first 256 processed samples are returned and the remaining 768 cached; the next three buffers will return the remaining cached samples while processing and buffering subsequent ones, and so forth. The internal mechanics of that I have solved, caching output if the current output buffer is too small, and so forth - so it all works as advertised, and the plugin reports its latency correctly. And when run as an app in demo-mode, playback works as expected. In the plugin's render block, it captures the number of frames written, and if it is less than the number of frames passed in, adjusts the mDataByteSize of the output buffers to match the actual quantity of data being returned: unsigned int framesWritten = (unsigned int) processHelper->processWithEvents(inAudioBufferList, outAudioBufferList, timestamp, frameCount, realtimeEventListHead); if (framesWritten < frameCount) { for (UInt32 i = 0; i < outAudioBufferList->mNumberBuffers; ++i) { outAudioBufferList->mBuffers[i].mDataByteSize = framesWritten * 4; // assume 4 byte floats } } However, there are a couple of serious issues: auval -v fails it with - Render Test at 64 frames, sample rate: 22050 Hz ERROR: Output Buffer Size does not match requested When connected to Logic Pro, it appears that mDataByteSize is ignored, and the entire allocated buffer is read - audio has sections of silence snipped into it which corresponds the number of empty buffers being returned If I set Logic's buffer size to 1024 and use a 1024 sample FFT window, the plugin works correctly - but of course a plugin cannot dictate buffer size, and `1024 is too small a window size to be useful for anything but filtering very high frequencies This seems like it has to be a solvable problem, and most likely the issue is in how my code reports the number of usable samples in the returned buffer. So, what is the correct way for a plugin to report that it has no samples to return, but will, uh, real soon now? I know I could convert this plugin to be one that does offline rendering of the entire input, but this is real-time processing, just with a fixed amount of latency, so that should not be necessary.

I’m running the iOS 26.2 Public Beta update and my album artwork is missing from the music app (I’m not using Apple Music). I use google to get my album artwork. Do I need to wait for a new update?

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

Hi, everyone, I downloaded the source code EditingSpatialAudioWithAnAudioMix.zip from https://aninterestingwebsite.com/documentation/Cinematic/editing-spatial-audio-with-an-audio-mix, when I carried out one of the actions named "process" in command line the program crashed!! Form the source code, I found that the value of componentType is set to kAudioUnitType_FormatConverter: // The actual `AudioUnit`. public var auAudioMix = AVAudioUnitEffect() init() { // Generate a component description for the audio unit. let componentDescription = AudioComponentDescription( componentType: kAudioUnitType_FormatConverter, componentSubType: kAudioUnitSubType_AUAudioMix, componentManufacturer: kAudioUnitManufacturer_Apple, componentFlags: 0, componentFlagsMask: 0) auAudioMix=AVAudioUnitEffect(audioComponentDescription: componentDescription) } But in the document from https://aninterestingwebsite.com/documentation/avfaudio/avaudiouniteffect/init(audiocomponentdescription:), it seems that componentType can not be set to kAudioUnitType_FormatConverter and : Has everyone encountered this problem?

I'm getting Crashlytics crashes from some my users, deep in the Apple code: Crashed: AXSpeech EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x00000007ec54b360 0 libobjc.A.dylib 0x3c9c objc_retain_x8 + 16 1 AudioToolboxCore 0x99580 auoop::RenderPipeUser::~RenderPipeUser() + 112 2 AudioToolboxCore 0xe6090 -[AUAudioUnit_XPC internalDeallocateRenderResources] + 92 3 AVFAudio 0x90a0 AUInterfaceBaseV3::Uninitialize() + 60 4 AVFAudio 0x4cbe0 AVAudioEngineGraph::PerformCommand(AUGraphNodeBaseV3&, AVAudioEngineGraph::ENodeCommand, void*, unsigned int) const + 768 5 AVFAudio 0x56b0c AVAudioEngineGraph::_Uninitialize(NSError**) + 132 6 AVFAudio 0x7834 AVAudioEngineImpl::Stop(NSError**) + 388 7 AVFAudio 0x636c -[AVAudioEngine dealloc] + 52 8 TextToSpeech 0x30674 _TTSNameForVoiceInformation + 20864 9 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 10 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 11 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 12 TextToSpeech 0x2d2f4 _TTSNameForVoiceInformation + 7680 13 TextToSpeech 0x496c TTSVocalizerCopyURLForFallbackResource + 8540 14 TextToSpeech 0x26094 TTSSpeechUnitTestingMode + 5548 15 libAXSpeechManager.dylib 0x108b0 -[AXSpeechManager .cxx_destruct] + 192 16 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 17 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 18 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 19 libAXSpeechManager.dylib 0x5298 -[AXSpeechManager dealloc] + 268 20 Foundation 0x3b8a4 __NSThreadPerformPerform + 272 21 CoreFoundation 0xd3208 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 28 22 CoreFoundation 0xdf864 __CFRunLoopDoSource0 + 176 23 CoreFoundation 0x646c8 __CFRunLoopDoSources0 + 244 24 CoreFoundation 0x7a1c4 __CFRunLoopRun + 828 25 CoreFoundation 0x7f4dc CFRunLoopRunSpecific + 612 26 Foundation 0x420c4 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 212 27 libAXSpeechManager.dylib 0x13390 -[AXSpeechThread main] + 552 28 Foundation 0x5b634 __NSThread__start__ + 716 29 libsystem_pthread.dylib 0x16b8 _pthread_start + 148 30 libsystem_pthread.dylib 0xb88 thread_start + 8 It's most likely related to my use of AVSpeechSynthesizer. I do change some of the utterance fields, including the voice that's being used (which is set to a value from speechVoices()). UtilAudioIos_tts = AVSpeechSynthesizer() let utterance = AVSpeechUtterance utterance.voice = AVSpeechSynthesisVoice(identifier: voice.voiceCode) utterance.volume = volume utterance.pitchMultiplier = pitch utterance.rate = rate UtilAudioIos_tts!.speak(utterance) By coincidence or not, the following sometimes appears in the device log: 2023-05-30 20:35:29.948078+0100 <appname>[466:12882] [catalog] Unable to list voice folder and also, sometimes: 2023-05-30 20:37:35.345933+0100 <appname>[466:13298] [catalog] Query for com.apple.MobileAsset.VoiceServices.VoiceResources failed: 2 2023-05-30 20:37:35.360854+0100 rehearserfree[466:13433] [AXTTSCommon] MauiVocalizer: 11006 (Can't compile rule): regularExpression=\Oviedo(?=, (\x1b\\pause=\d+\\)?Florida)\b, message=unrecognized character follows \, characterPosition=1 2023-05-30 20:37:35.363163+0100 <appname>[466:13433] [AXTTSCommon] MauiVocalizer: 16038 (Resource load failed): component=ttt/re, uri=, contentType=application/x-vocalizer-rettt+text, lhError=88602000 2023-05-30 20:37:35.363182+0100 <appname>[466:13433] [AXTTSCommon] Error loading rules: 2147483648 All of these crashes have been on the various versions of iOS 16. Edit: I can't reproduce the crash myself - it's just some (not all) app users. The log entries above appear locally on my device (with no crash) but I can't see the logs of the users who have the crashes. Any idea what this might be caused by, or how to go about tracking the problem down?

I have the new iOS 26 SpeechTranscriber working in my application. The issue I am facing is how to determine if the device I am running on supports SpeechTranscriber. I was able to create code that tests if the device supports transcription but it takes a bit of time to run and thus the results are not available when the app launches. What I am looking for is a list of what iOS 26 devices it doesn't run on. I think its safe to assume any new devices will support it so if we can just have a list of what devices that can run iOS 26 and not able to do transcription it would be much faster for the app. I have determined it doesn't work on a SE 2nd Gen, it works on iPhone 12, SE 3rd Gen, iPhone 14 Pro, 15 Pro. As the SpeechTranscriber doesn't work in the simulator I can't determine that way. I have checked the docs and it doesn't list the devices it doesn't work on.

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

I have a Catalyst app ('container') which hosts an embedded AUv3 Audio Unit extension ('plugin'). This used to work for years and has worked with this project until a few days ago. it still works on iOS as expected on MacOS the extension is never registered/installed and won't load extension won't show up with AUVal seems to have stopped working with the 26.1 XCode update I'm fairly certain the problem is not code related (i.e. likely build settings, project settings, entitlements, signing, etc.) I have compared all settings with another still-working project and can't find any meaningful difference (I can't request code-level support because even the minimal thing vastly exceeds the 250 lines of code limit.) How can I debug the issue? I literally don't know where to start to fix this problem, short of rebuilding the entire thing and hope that it magically starts working again.

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Good day, ladies and gents. I have an application that reads audio from the microphone. I'd like it to also be able to read from the Mac's audio output stream. (A bonus would be if it could detect when the Mac is playing music.) I'd eventually be able to figure it out reading docs, but if someone can give a hint, I'd be very grateful, and would owe you the libation of your choice. Here's the code used to set up the AudioUnit: -(NSString*) configureAU { AudioComponent component = NULL; AudioComponentDescription description; OSStatus err = noErr; UInt32 param; AURenderCallbackStruct callback; if( audioUnit ) { AudioComponentInstanceDispose( audioUnit ); audioUnit = NULL; } // was CloseComponent // Open the AudioOutputUnit description.componentType = kAudioUnitType_Output; description.componentSubType = kAudioUnitSubType_HALOutput; description.componentManufacturer = kAudioUnitManufacturer_Apple; description.componentFlags = 0; description.componentFlagsMask = 0; if( component = AudioComponentFindNext( NULL, &description ) ) { err = AudioComponentInstanceNew( component, &audioUnit ); if( err != noErr ) { audioUnit = NULL; return [ NSString stringWithFormat: @"Couldn't open AudioUnit component (ID=%d)", err] ; } } // Configure the AudioOutputUnit: // You must enable the Audio Unit (AUHAL) for input and output for the same device. // When using AudioUnitSetProperty the 4th parameter in the method refers to an AudioUnitElement. // When using an AudioOutputUnit for input the element will be '1' and the output element will be '0'. param = 1; // Enable input on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Input, 1, &param, sizeof(UInt32) ); chkerr("Couldn't set first EnableIO prop (enable inpjt) (ID=%d)"); param = 0; // Disable output on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Output, 0, &param, sizeof(UInt32) ); chkerr("Couldn't set second EnableIO property on the audio unit (disable ootpjt) (ID=%d)"); param = sizeof(AudioDeviceID); // Select the default input device AudioObjectPropertyAddress OutputAddr = { kAudioHardwarePropertyDefaultInputDevice, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster }; err = AudioObjectGetPropertyData( kAudioObjectSystemObject, &OutputAddr, 0, NULL, &param, &inputDeviceID ); chkerr("Couldn't get default input device (ID=%d)"); // Set the current device to the default input unit err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &inputDeviceID, sizeof(AudioDeviceID) ); chkerr("Failed to hook up input device to our AudioUnit (ID=%d)"); callback.inputProc = AudioInputProc; // Setup render callback, to be called when the AUHAL has input data callback.inputProcRefCon = self; err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_SetInputCallback, kAudioUnitScope_Global, 0, &callback, sizeof(AURenderCallbackStruct) ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); param = sizeof(AudioStreamBasicDescription); // get hardware device format err = AudioUnitGetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 1, &deviceFormat, &param ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); audioChannels = MAX( deviceFormat.mChannelsPerFrame, 2 ); // Twiddle the format to our liking actualOutputFormat.mChannelsPerFrame = audioChannels; actualOutputFormat.mSampleRate = deviceFormat.mSampleRate; actualOutputFormat.mFormatID = kAudioFormatLinearPCM; actualOutputFormat.mFormatFlags = kAudioFormatFlagIsFloat | kAudioFormatFlagIsPacked | kAudioFormatFlagIsNonInterleaved; if( actualOutputFormat.mFormatID == kAudioFormatLinearPCM && audioChannels == 1 ) actualOutputFormat.mFormatFlags &= ~kLinearPCMFormatFlagIsNonInterleaved; #if __BIG_ENDIAN__ actualOutputFormat.mFormatFlags |= kAudioFormatFlagIsBigEndian; #endif actualOutputFormat.mBitsPerChannel = sizeof(Float32) * 8; actualOutputFormat.mBytesPerFrame = actualOutputFormat.mBitsPerChannel / 8; actualOutputFormat.mFramesPerPacket = 1; actualOutputFormat.mBytesPerPacket = actualOutputFormat.mBytesPerFrame; // Set the AudioOutputUnit output data format err = AudioUnitSetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 1, &actualOutputFormat, sizeof(AudioStreamBasicDescription)); chkerr("Could not change the stream format of the output device (ID=%d)"); param = sizeof(UInt32); // Get the number of frames in the IO buffer(s) err = AudioUnitGetProperty( audioUnit, kAudioDevicePropertyBufferFrameSize, kAudioUnitScope_Global, 0, &audioSamples, &param ); chkerr("Could not determine audio sample size (ID=%d)"); err = AudioUnitInitialize( audioUnit ); // Initialize the AU chkerr("Could not initialize the AudioUnit (ID=%d)"); // Allocate our audio buffers audioBuffer = [self allocateAudioBufferListWithNumChannels: actualOutputFormat.mChannelsPerFrame size: audioSamples * actualOutputFormat.mBytesPerFrame]; if( audioBuffer == NULL ) { [ self cleanUp ]; return [NSString stringWithFormat: @"Could not allocate buffers for recording (ID=%d)", err]; } return nil; } (...again, it would be nice to know if audio output is active and thereby choose the clean output stream over the noisy mic, but that would be a different chunk of code, and my main question may just be a quick edit to this chunk.) Thanks for your attention! ==Dave [p.s. if i get more than one useful answer, can i "Accept" more than one, to spread the credit around?] {pps: of course, the code lines up prettier in a monospaced font!}

【溦N51888M】腾龙公司会员申请流程步骤【罔纸 211239.com 】输入官惘到浏览器打开联系24小时在线业务人员办理上下，打开公司官网. 二、点击主页右上角注册按钮. 三、填写账号信息. 四、输入手机号，验证码，密码. 五、勾选用户协议，完成注册协议，完成注册. 注意：若出现账号已存在」提示，需重新设置唯一账号名称

Hi folks - I'm having trouble finding specific documentation about Audio Unit MIDI plugins - as in MIDI -only. Any suggestions welcome as searches aren't returning much. (too niche? user error?)

I wrote a Swift macOS app to control a PCI audio device. The code switches between the default output and input channels. As soon as I launch the Audio-Midi Setup utility, channel switching stops working. The driver properties allow switching, but the system doesn't respond. I have to delete the contents of /Library/Preferences/Audio and reset Core Audio. What am I missing? func setDefaultChannelsOutput() { guard let deviceID = getDeviceIDByName(deviceName: "PCI-424") else { return } let selectedIndex = DefaultChannelsOutput.indexOfSelectedItem if selectedIndex < 0 || selectedIndex >= 24 { return } let channel1 = UInt32(selectedIndex * 2 + 1) let channel2 = UInt32(selectedIndex * 2 + 2) var channels: [UInt32] = [channel1, channel2] var propertyAddress = AudioObjectPropertyAddress( mSelector: kAudioDevicePropertyPreferredChannelsForStereo, mScope: kAudioDevicePropertyScopeOutput, mElement: kAudioObjectPropertyElementWildcard ) let dataSize = UInt32(MemoryLayout<UInt32>.size * channels.count) let status = AudioObjectSetPropertyData(deviceID, &propertyAddress, 0, nil, dataSize, &channels) if status != noErr { print("Error setting default output channels: \(status)") } }