Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.<company>.<appname></string> </array> </dict>

I'm encountering numerous crashes involving the com.apple.coreaudio.AQClient thread on our application. The crash details are as follows: #10 com.apple.coreaudio.AQClient SIGSEGV SEGV_ACCERR 0 libobjc.A.dylib _objc_msgSend + 44 1 AudioToolbox ClientMessageHandler::PropertyChanged(unsigned int) + 872 2 AudioToolbox ClientAudioQueue::FetchAndDeliverPendingCallbacks(unsigned int) + 924 3 AudioToolbox __XCallbackNotificationsAvailable + 212 4 libAudioToolboxUtility.dylib _mshMIGPerform + 260 5 CoreFoundation ___CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 56 6 CoreFoundation ___CFRunLoopDoSource1 + 596 7 CoreFoundation ___CFRunLoopRun + 2392 8 CoreFoundation _CFRunLoopRunSpecific + 572 9 AudioToolbox CADeprecated::GenericRunLoopThread::Entry(void*) + 156 10 libAudioToolboxUtility.dylib CADeprecated::CAPThread::Entry(CADeprecated::CAPThread*) + 88 11 libsystem_pthread.dylib __pthread_start + 116 All these crashes occur on system versions below iOS/iPadOS 17, primarily when the device's available RAM is low. What steps can I take to resolve this issue? Any insights would be greatly appreciated!

Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.

On Apple TV 4K 3rd generation, with tvOS 26 beta 2, when two HomePod 2 are paired to the device, music and movie sources with Dolby Atmos can only be listened to in stereo. dolby atmos not supported

Hello everyone, I’m new to Swift development and have been working on an audio module that plays a specific sound at regular intervals - similar to a workout timer that signals switching exercises every few minutes. Following AVFoundation documentation, I’m configuring my audio session like this: let session = AVAudioSession.sharedInstance() try session.setCategory( .playback, mode: .default, options: [.interruptSpokenAudioAndMixWithOthers, .duckOthers] ) self.engine.attach(self.player) self.engine.connect(self.player, to: self.engine.outputNode, format: self.audioFormat) try? session.setActive(true) When it’s time to play cues, I schedule playback on a DispatchQueue: // scheduleAudio uses DispatchQueue self.scheduleAudio(at: interval.start) { do { try audio.engine.start() audio.node.play() for sample in interval.samples { audio.node.scheduleBuffer(sample.buffer, at: AVAudioTime(hostTime: sample.hostTime)) } } catch { print("Audio activation failed: \(error)") } } This works perfectly in the foreground. But once the app goes into the background, the scheduled callback runs, yet the audio engine fails to start, resulting in an error with code 561015905. Interestingly, if the app is already playing audio before going to the background, the scheduled sounds continue to play as expected. I have added the required background audio mode to my Info plist file by including the key UIBackgroundModes with the value audio. Is there anything else I should configure? What is the best practice to play periodic audio when the app runs in the background? How do apps like turn-by-turn navigation handle continuous audio playback in the background? Any advice or pointers would be greatly appreciated!

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

【溦N51888M】腾龙公司会员申请流程步骤【罔纸 211239.com 】输入官惘到浏览器打开联系24小时在线业务人员办理上下，打开公司官网. 二、点击主页右上角注册按钮. 三、填写账号信息. 四、输入手机号，验证码，密码. 五、勾选用户协议，完成注册协议，完成注册. 注意：若出现账号已存在」提示，需重新设置唯一账号名称

I need to apply headphone-specific scenario only when headphones are the sole active playback device in my iOS audio app. Problem that there is no absolute way to definitively understand that headphones are the sole active playback device AVAudioSession.currentRoute.outputs portTypes don't guarantee headphones: let session = AVAudioSession.sharedInstance() let outputs = session.currentRoute.outputs let headphonesOnly = outputs.count == 1 && (outputs.first?.portType == .headphones || outputs.first?.portType == .bluetoothA2DP || outputs.first?.portType == .bluetoothHFP || outputs.first?.portType == .bluetoothLE) The issue in code above that listed bluetooth profiles (A2DP, HFP, LE) can be used by any audio device, not only headphones Is there any public API on iOS that can: Distinguish Bluetooth headphones vs Bluetooth speakers when both use A2DP/LE? Expose the user’s “Device Type” classification (headphones / speaker / car stereo, etc.) that is shown in Settings → Bluetooth → Device Type? Provide a more reliable way to know “this route is definitely headphones” for A2DP devices, beyond portType and portName string heuristics?

Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅

Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!

With the Voice Conversational Entitlement, can a CarPlay app establish a turn-based audio interface that operates in two modes: Speaking mode: Audio Session configured for playback Buffered audio Listening mode: Switch Audio Session to .record or .playAndRecord Activate SFSpeechRecognizer And continue toggling back and forth. The app should listen for responses to questions or other audio cues, and assuming those answers are correct (based on analysis of results from SFSpeechRecognizer), continue this pattern of mode 1 and 2 alternating. This appears to be a valid use of this entitlement. Does this also require the Audio App Entitlement, or is the Voice Conversational Entitlement sufficient? Are there other obstacles to this type of app that I'm not seeing? Or perhaps this is technically possible, but unlikely to pass app store review?

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

Recently, after the update of 26.3 Mac OS (Tahoe), the ordering of my music app has been horrible at best - music disappearing, tracks not aligning with albums (even if the albums are different years). It's created quite a problem, because the disappearing tracks issue seems to be replicating to iOS devices as well (although track numbering and album association seem to be stable). Has anyone else heard of this issue?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

Hello, I've discovered a buffer initialization bug in AVAudioUnitSampler that happens when loading presets with multiple zones referencing different regions in the same audio file (monolith/concatenated samples approach). Almost all zones output silence (i.e. zeros) at the beginning of playback instead of starting with actual audio data. The Problem Setup: Single audio file (monolith) containing multiple concatenated samples Multiple zones in an .aupreset, each with different sample start and sample end values pointing to different regions of the same file All zones load successfully without errors Expected Behavior: All zones should play their respective audio regions immediately from the first sample. Actual Behavior: Last zone in the zone list: Works perfectly - plays audio immediately All other zones: Output [0, 0, 0, 0, ..., _audio_data] instead of [real_audio_data] The number of zeros varies from event to event for each zone. It can be a couple of samples (<30) up to several buffers. After the initial zeros, the correct audio plays normally, so there is no shift in audio playback, just missing samples at the beginning. Minimal Reproduction 1. Create Test Monolith Audio File Create a single Wav file with 3 concatenated 1-second samples (44.1kHz): Sample 1: frames 0-44099 (constant amplitude 0.3) Sample 2: frames 44100-88199 (constant amplitude 0.6) Sample 3: frames 88200-132299 (constant amplitude 0.9) 2. Create Test Preset Create an .aupreset with 3 zones all referencing the same file: Pseudo code <Zone array> <zone 1> start : 0, end: 44099, note: 60, waveform: ref_to_monolith.wav; <zone 2> start sample: 44100, note: 62, end sample: 88199, waveform: ref_to_monolith.wav; <zone 3> start sample: 88200, note: 64, end sample: 132299, waveform: ref_to_monolith.wav; </Zone array> 3. Load and Test // Load preset into AVAudioUnitSampler let sampler = AVAudioUnitSampler() try sampler.loadAudioFiles(from: presetURL) // Play each zone (MIDI notes C4=60, D4=62, E4=64) sampler.startNote(60, withVelocity: 64, onChannel: 0) // Zone 1 sampler.startNote(62, withVelocity: 64, onChannel: 0) // Zone 2 sampler.startNote(64, withVelocity: 64, onChannel: 0) // Zone 3 4. Observed Result Zone 1 (C4): [0, 0, 0, ..., 0.3, 0.3, 0.3] ❌ Zeros at beginning Zone 2 (D4): [0, 0, 0, ..., 0.6, 0.6, 0.6] ❌ Zeros at beginning Zone 3 (E4): [0.9, 0.9, 0.9, ...] ✅ Works correctly (last zone) What I've Extensively Tested What DOES Work Separate files per zone: Each zone references its own individual audio file All zones play correctly without zeros Problem: Not viable for iOS apps with 500+ sample libraries due to file handle limitations What DOESN'T Work (All Tested) 1. Different Audio Formats: CAF (Float32 PCM, Int16 PCM, both interleaved and non-interleaved) M4A (AAC compressed) WAV (uncompressed) SF2 (SoundFont2) Bug persists across all formats 2. CAF Region Chunks: Created CAF files with embedded region chunks defining zone boundaries Set zones with no sampleStart/sampleEnd in preset (nil values) AVAudioUnitSampler completely ignores CAF region metadata Bug persists 3. Unique Waveform IDs: Gave each zone a unique waveform ID (268435456, 268435457, 268435458) Each ID has its own file reference entry (all pointing to same physical file) Hypothesized this might trigger separate buffer initialization Bug persists - no improvement 4. Different Sample Rates: Tested: 44.1kHz, 48kHz, 96kHz Bug occurs at all sample rates 5. Mono vs Stereo: Bug occurs with both mono and stereo files Environment macOS: Sonoma 14.x (tested across multiple minor versions) iOS: Tested on iOS 17.x with same results Xcode: 16.x Frameworks: AVFoundation, AudioToolbox Reproducibility: 100% reproducible with setup described above Impact & Use Case This bug severely impacts professional music applications that need: Small file sizes: Monolith files allow sharing compressed audio data (AAC/M4A) iOS file handle limits: Opening 400+ individual sample files is not viable on iOS Performance: Single file loading is much faster than hundreds of individual files Standard industry practice: Monolith/concatenated samples are used by EXS24, Kontakt, and most professional samplers Current Impact: Cannot use monolith files with AVAudioUnitSampler on iOS Forced to choose between: unusable audio (zeros at start) OR hitting iOS file limits No viable workaround exists Root Cause Hypothesis The bug appears to be in AVAudioUnitSampler's internal buffer initialization when: Multiple zones share the same source audio file Each zone specifies different sampleStart/sampleEnd offsets Key observation: The last zone in the zone array always works correctly. This is NOT related to: File permissions or security-scoped resources (separate files work fine) Audio codec issues (happens with uncompressed PCM too) Preset parsing (preset loads correctly, all zones are valid) Questions Is this a known issue? I couldn't find any documentation, bug reports, or discussions about this. Is there ANY workaround that allows monolith files to work with AVAudioUnitSampler? Alternative APIs? Is there a different API or approach for iOS that properly supports monolith sample files?

Environment Device: iPhone 16e iOS Version: 18.4.1 - 18.7.1 Framework: AVFoundation (AVAudioEngine) Problem Summary On iPhone 16e (iOS 18.4.1-18.7.1), the installTap callback stops being invoked after resuming from a phone call interruption. This issue is specific to phone call interruptions and does not occur on iPhone 14, iPhone SE 3, or earlier devices. Expected Behavior After a phone call interruption ends and audioEngine.start() is called, the previously installed tap should continue receiving audio buffers. Actual Behavior After resuming from phone call interruption: Tap callback is no longer invoked No audio data is captured No errors are thrown Engine appears to be running normally Note: Normal pause/resume (without phone call interruption) works correctly. Steps to Reproduce Start audio recording on iPhone 16e Receive or make a phone call (triggers AVAudioSession interruption) End the phone call Resume recording with audioEngine.start() Result: Tap callback is not invoked Tested devices: iPhone 16e (iOS 18.4.1-18.7.1): Issue reproduces ✗ iPhone 14 (iOS 18.x): Works correctly ✓ iPhone SE 3 (iOS 18.x): Works correctly ✓ Code Initial Setup (Works) let inputNode = audioEngine.inputNode inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioEngine.start() Interruption Handling NotificationCenter.default.addObserver( forName: AVAudioSession.interruptionNotification, object: AVAudioSession.sharedInstance(), queue: nil ) { notification in guard let userInfo = notification.userInfo, let typeValue = userInfo[AVAudioSessionInterruptionTypeKey] as? UInt, let type = AVAudioSession.InterruptionType(rawValue: typeValue) else { return } if type == .began { self.audioEngine.pause() } else if type == .ended { try? self.audioSession.setActive(true) try? self.audioEngine.start() // Tap callback doesn't work after this on iPhone 16e } } Workaround Full engine restart is required on iPhone 16e: func resumeAfterInterruption() { audioEngine.stop() inputNode.removeTap(onBus: 0) inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioSession.setActive(true) try audioEngine.start() } This works but adds latency and complexity compared to simple resume. Questions Is this expected behavior on iPhone 16e? What is the recommended way to handle phone call interruptions? Why does this only affect iPhone 16e and not iPhone 14 or SE 3? Any guidance would be appreciated!

If a Tap or AggregateDevice with the Private property set is created, does it automatically disappear when the process ends? If not, how can I remove the Tap or AggregateDevice before the main process terminates?