Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

I've tried SpeechTranscriber with a lot of my devices (from iPhone 12 series ~ iPhone 17 series) without issues. However, SpeechTranscriber.isAvailable value is false for my iPhone 11 Pro. https://aninterestingwebsite.com/documentation/speech/speechtranscriber/isavailable I'am curious why the iPhone 11 Pro device is not supported. Are all iPhone 11 series not supported intentionally? Or is there any problem with my specific device? I've also checked the supportedLocales, and the value is an empty array. https://aninterestingwebsite.com/documentation/speech/speechtranscriber/supportedlocales

I have a Catalyst app ('container') which hosts an embedded AUv3 Audio Unit extension ('plugin'). This used to work for years and has worked with this project until a few days ago. it still works on iOS as expected on MacOS the extension is never registered/installed and won't load extension won't show up with AUVal seems to have stopped working with the 26.1 XCode update I'm fairly certain the problem is not code related (i.e. likely build settings, project settings, entitlements, signing, etc.) I have compared all settings with another still-working project and can't find any meaningful difference (I can't request code-level support because even the minimal thing vastly exceeds the 250 lines of code limit.) How can I debug the issue? I literally don't know where to start to fix this problem, short of rebuilding the entire thing and hope that it magically starts working again.

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

I’m seeing what appears to be an iOS audio-session issue that occurs only when a phone call happens while the app is in the background. API: AVAudioSession, AVAudioRecorder Background Modes: Audio enabled (UIBackgroundModes = audio) Category: .playAndRecord Microphone permission: granted Expected Behavior If the app is recording audio in the background and a phone call interrupts it: AVAudioSession.interruptionNotification(.began) fires Call ends AVAudioSession.interruptionNotification(.ended) fires App should be able to re-activate its audio session and resume or restart recording Apple documentation suggests this should be supported for background audio apps. Actual Behavior When the app is in the background and phone call is ended: AVAudioSession.interruptionNotification(.ended) does fire Attempting to reactivate the audio session always fails: Error Domain=NSOSStatusErrorDomain Code=560557684 ("!int") "Session activation failed" The session appears to remain permanently “interrupted” Retrying activation (with delays) does not help Recreating AVAudioRecorder does not help Reactivation works only after the app is opened again

Hi there, I recently launched a dj app to the mac app store, and was wondering how I could access songs for mixing purposes via Apple Music just like how serato, rekordbox, djay, and other DJ apps do? Thanks, Gunek

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

I have a new 2725QC (Dell) Monitor that uses USB-C connection to connect with the iMac (2019, 27 inch) through the back port but the problem is that the volume control can currently only be done from the hardware, not the software control using the Apple keyboard. What should I do in terms of writing code to do this (Swift or Obj-C)? Is there a third-party solution for Intel iMac and ARM Mac?

I bought two "Apple USB-C to Headphone Jack Adapters". Upon closer inspection, they seems to be of different generations: The one with product ID 0x110a on top is working fine. The one with product ID 0x110b has two issues: There is a short but loud click noise on the headphone when I connect it to the iPad. When I play audio using AVAudioPlayer the first half of a second or so is cut off. Here's how I'm playing the audio: audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.delegate = self audioPlayer?.prepareToPlay() audioPlayer?.play() Is this a known issue? Am I doing something wrong?

I am a graduate student conducting research in speech/audio signal processing and multimodal interaction. Apple Vision Pro is widely recognized as a multimodal interactive system supporting voice, eye, and gesture inputs. However, I could not find detailed specifications or documentation about the audio input sampling rate used by the device’s built-in microphone array when capturing user audio. Specifically, I would like to understand: What is the default audio input sampling rate (e.g., 16 kHz, 44.1 kHz, 48 kHz, etc.) for the Vision Pro’s microphones? When developing with visionOS / AVAudioSession / AVAudioEngine, is there a documented or recommended sampling rate for audio capture? Are there any best practices or settings for enabling high-quality voice capture on Vision Pro (especially for voice research tasks)? For context, my work involves voice processing, analysis, and possibly on-device real-time speech recognition. Any pointers to relevant APIs, documentation or examples (especially regarding audio capture buffer size or available formats on visionOS) would be very helpful. Thank you in advance! Best regards.

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

I have an application that includes custom artwork for the album cover and text details setup with the MPRemoteCommandCenter.shared() reference. I need the user to have a full featured "now playing" display to see all of this. My experience is that cannot find a set of parameters for AVAudioSession.setCategory() that route audio successfully, and display the full featured now playing deck. If I use .playAndRecord, the audio I send out plays out on the radio. But, the now-playing deck is empty and nothing I do with the command center seems to change that. If I instead use .playback, I cannot use .defaultToSpeaker option which is the only way I've found to cause the "now-playing" navigation button to appear so that the full featured deck will display. But, of course setCategory() fails with an error about .defaultToSpeaker only available with .playAndRecord, so some default or intermediate state is entered and I see the full featured deck, but no audio goes out to the radio. What combination is supposed to be used here and is this more likely a problem with thread use (@MainActor) and/or some ordering of operations that I've overlooked?

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

I'm currently trying to develope ipod control function on IVI for vehicle. From previous experience I remember we need to implement iTunetagging, but since I can't find it in Accessory Firmware Specification R46, I'm wondering whether iTunesTagging is no longer support. Thanks in advance for you support!

Hi team, With regards to Call (Live) Translations on VOIP: Is it possible to invoke live translations within the app? (without going into the Call System UI) Is it possible to navigate users from app to Call System UI via an API? (and also invoking the new live translations directly) Will Apple support more languages apart from the current ones? (Currently I see 4 supported languages)

I'm working in Swift/SwiftUI, running XCode 16.3 on macOS 15.4 and I've seen this when running in the iOS simulator and in a macOS app run from XCode. I've also seen this behaviour with 3 different audio files. Nothing in the documentation says that the speechRecognitionMetadata property on an SFSpeechRecognitionResult will be nil until isFinal, but that's the behaviour I'm seeing. I've stripped my class down to the following: private var isAuthed = false // I call this in a .task {} in my SwiftUI View public func requestSpeechRecognizerPermission() { SFSpeechRecognizer.requestAuthorization { authStatus in Task { self.isAuthed = authStatus == .authorized } } } public func transcribe(from url: URL) { guard isAuthed else { return } let locale = Locale(identifier: "en-US") let recognizer = SFSpeechRecognizer(locale: locale) let recognitionRequest = SFSpeechURLRecognitionRequest(url: url) // the behaviour occurs whether I set this to true or not, I recently set // it to true to see if it made a difference recognizer?.supportsOnDeviceRecognition = true recognitionRequest.shouldReportPartialResults = true recognitionRequest.addsPunctuation = true recognizer?.recognitionTask(with: recognitionRequest) { (result, error) in guard result != nil else { return } if result!.isFinal { //speechRecognitionMetadata is not nil } else { //speechRecognitionMetadata is nil } } } } Further, and this isn't documented either, the SFTranscriptionSegment values don't have correct timestamp and duration values until isFinal. The values aren't all zero, but they don't align with the timing in the audio and they change to accurate values when isFinal is true. The transcription otherwise "works", in that I get transcription text before isFinal and if I wait for isFinal the segments are correct and speechRecognitionMetadata is filled with values. The context here is I'm trying to generate a transcription that I can then highlight the spoken sections of as audio plays and I'm thinking I must be just trying to use the Speech framework in a way it does not work. I got my concept working if I pre-process the audio (i.e. run it through until isFinal and save the results I need to json), but being able to do even a rougher version of it 'on the fly' - which requires segments to have the right timestamp/duration before isFinal - is perhaps impossible?

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

Hey everyone, I'm encountering an issue with audio sample rate conversion that I'm hoping someone can help with. Here's the breakdown: Issue Description: I've installed a tap on an input device to convert audio to an optimal sample rate. There's a converter node added on top of this setup. The problem arises when joining Zoom or FaceTime calls—the converter gets deallocated from memory, causing the program to crash. Symptoms: The converter node is being deallocated during video calls. The program crashes entirely when this happens. Traditional methods of monitoring sample rate changes (tracking nominal or actual sample rates) aren't working as expected. The Big Challenge: I can't figure out how to properly monitor sample rate changes. Listeners set up to track these changes don't trigger when the device joins a Zoom or FaceTime call. Please, if anyone has experience with this or knows a solution, I'd really appreciate your help. Thanks in advance! ⁠

I'm working on a v2 Audio Unit that has some complicated internal state (audio, midi, other settings). When the internal state changes, I want to inform the host (f.i. Logic Pro) that my plugin state has changed, and that the main window should show the 'project changed' status through the window close button. This was easy to achieve for the VST version of the plugin, but I can't figure out a way to do it for the Audio Unit. I've tried: Notifying change of the kAudioUnitProperty_ClassInfo property that stores the plugin state: unit->PropertyChanged(kAudioUnitProperty_ClassInfo, kAudioUnitScope_Global, 0); Setting the kAudioUnitProperty_ClassInfo property value each time the plugin state changes. Adding a new parameter called 'dirtystate' and toggling it and notifying the change each time the plugin state changes. But nothing really make Logic take notice. This should be an easy task, but I can't put my finger on it. How do I flag may AUv2 as needing its status saved (i.e. the host project needs saving)?

Hello, I need to know what is a unique identifier of a MIDI device (source/destination). Important note: I want to get the same ID when a device is reconnected (unplugged and then plugged again). The main candidate is kMIDIPropertyUniqueID property. But I don't know if it meets the requirement above or not. Additional question: is it always available for any endpoint? Also there is kMIDIPropertyDeviceID property. What about it? And one more option is just MIDIEndpointRef returned by MIDIGetSource or MIDIGetDestination. So what is the proper way to get ID which persists between device reconnections?