Claude Agent OAuth token silently expires and fails to refresh in Xcode 26.4 — requires manual re-auth every 12-24 hours. this was not happening in 26.3, its a regression in 26.4 Details and sysdiagnose submitted: FB22421882

Good morning, I assume that coredata model changes are automatically created on the development cloudkit (CD_*) as that has been the behaviour in the past and than you deploy the schema changes to prod. I have a case were a new field in a existing table is not appearing in the dev cloudkit table is there a way to "force" it to show up? thanks in advance

Since a combined upgrade to macOS 26.4 and Xcode 26.4 I am plagued by .DS_Store and UserInterfaceState files appearing in my repository list of uncommitted changes. This is preventing commits and merging etc. I have added the following list to both the .gitignore_global file via directly editing the file and also the Xcode>Settings>Git Settings>Ignore Files # Mac OS X .DS_Store # Xcode *.pbxuser *.mode1v3 *.mode2v3 *.perspectivev3 *.xcuserstate UserInterfaceState.xcuserstate project.xcworkspace/ xcuserdata/ # Generated files *.o *.pyc # Build directories DerivedData/ build/ # CocoaPods Pods/ # Carthage Carthage/ # Other *.swp *.lock This has been to no avail. I have raised Feedback FB22370688 for this issue. It has been marked as no similar reports which is odd because there are a lot of mentions of the .DS_Store files appearing in Git and also of problems with the ignore settings of Git. For a while, I successfully prevented the .DS_Store files from showing up as uncommitted changes but now they are back again. I did a git status on the project and got this output for a while Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git restore <file>..." to discard changes in working directory) modified: Target Analysis.xcodeproj/project.xcworkspace/xcuserdata/myuserid.xcuserdatad/UserInterfaceState.xcuserstate Ignored files: (use "git add -f <file>..." to include in what will be committed) Target Analysis iOS/ Target Analysis macOS/ Views/Testing/.DS_Store Now, in Xcode it looks like this So the .DS_Store files are no longer being ignored. I have raised an Apple Developer Tech Support (DTS) Question as I have exhausted every avenue that I could find. DTS said to just remove the file(s) in Git. Neither this nor the .gitignore_global file are fixing the problem. This all just seems to be so unnecessarily difficult especially as many others have faced the same problem.

In Interface Builder there use to be a segmented control to switch Inspectors. It's been this way forever. I could switch from: File Inspector Attributes Inspector Size Inspector Etc... Now in Xcode 26.4, it is this clunky pop up button? What? I thought Apple didn't like Interface Builder anymore so I'm surprised they are even touching it. This part of a SwiftUI rewrite or just bad vibes?

Compile with xcode26 due to the need to maintain compatibility with older third-party libraries and other linker flags -ObjC -ld_classic -Wl,-U,ld64_classic_ordinal_for_proxy -Wl,-no_fixup_chains Will using these settings have any impact

Objective C projects, if that matters, but several useful editing features were removed, but the biggest issues relate to Storyboards. Action buttons were moved all around. Not sure why it was changed, as the new layout is not intuitive at all. Loading of storyboards is amazingly slow. It's been getting worse for several revisions, but it is really bad now. Connecting from the storyboard to code is non functional with this revision. Connections have to be done from the code to the storyboard only, which means all the code has to be done before storyboard changes. This is much less efficient for coding. Really dislike 26.4 editing changes. You are making our jobs harder, not easier.

Hi, I'm using Bitbucket for remote repository. I try to change the Bitbucket App Password used so far to the remote repository with the new API token with scope as the App Password will be deprecated.. I created the API token successfully but I cannot configure it in Xcode. Does someone has already successfully replaced the App Password with the new API token in Xcode? Thank you in advance Jean MacBook Air 26.3.1 Xcode Version 26.4 (17E192)

Hi guys, Two annoying issues I'm having at the moment with agentic coding. Xcode signs out of Claude every single day and gives the error Failed to authenticate. API Error: 401. The only solution is go to settings and sign out of Claude and in again. Apple removed the little arrow to select the model, so now every time you start a new conversation you have to pick the model. I just want to start a new conversation with the model I'm using. The extra click is a time waster. Any solutions would be appreciated. Thanks

Hi Apple Developer Forums and Final Cut Pro team, I am developing a Final Cut Pro Workflow Extension focused on speech-to-text / subtitle recognition and generation. The extension runs inside Final Cut Pro, analyzes clips, generates accurate subtitles (often hundreds of individual elements), and allows users to drag the generated subtitles directly back into the FCP timeline as a clean, editable Compound Clip or Storyline. We are implementing this drag-and-drop functionality using the official pasteboard mechanism (com.apple.finalcutpro.xml and versioned types such as com.apple.finalcutpro.xml.v1-10). While the high-level documentation is helpful: Supporting Drag and Drop for Data Sent to Final Cut Pro FCPXML Reference Designing Workflow Extensions There is still no detailed public specification for the exact internal XML structure that Final Cut Pro expects for a drag operation to reliably result in a usable Compound Clip (or direct Storyline insertion), especially when dealing with large numbers of subtitle titles. After extensive systematic testing (multiple rounds over several weeks, with full experiment logs), we have observed the following: Short subtitle sequences work with many different structures (various combinations of , , , inline titles, etc.). Long subtitle lists (800+ individual elements) only succeed reliably when the outer structure uses a specific shell: root= containing + (often combined with a mainflow sequence and inner / layers). In all working cases, the dropped result appears as a “fake” / nested Compound Clip that requires 2–3 Break Apart (unpack) operations before the real editable Storyline with individual titles is revealed. Almost all other structures — pure as root, as root, wrapper layers, direct inline titles without the clip + gap + storyline shell, etc. — are immediately rejected by Final Cut Pro when the subtitle count is high. This undocumented behavior forces third-party Workflow Extension developers to engage in time-consuming blind guesswork and reverse-engineering just to achieve basic, reliable drag-and-drop integration. Our request: We kindly ask Apple to publish a detailed, official specification for the Draggable FCPXML Text Protocol (or expand the existing FCPXML Reference) that clearly defines: The minimal and recommended XML structure for dragging content into the timeline as a Compound Clip or Storyline. Exact roles and requirements for , , , , , and any implicit “mainflow” patterns. Best practices for handling large numbers of nested titles/subtitles. Reasons why certain nesting patterns are rejected or produce multi-level fake compounds. Any version-specific differences across FCPXML DTD versions. This specification is critically necessary for the FCPX Workflow Extension ecosystem. Reliable drag-and-drop from extensions back to the timeline is one of the most valuable integration points for subtitle/caption tools, transcription services, title generators, and other workflow utilities. Without clear guidelines, developers waste significant time on trial-and-error, leading to inconsistent user experiences and slower innovation in the Final Cut Pro community. We are more than happy to share our complete experiment logs, working and failing XML samples, and GitHub repository with the documentation or engineering team if it helps accelerate this. Thank you in advance for any official clarification or guidance. Clear documentation in this area would greatly benefit both developers and Final Cut Pro users.

After updating to Xcode 26.4 and also the update on the simulator the copy paste feature in the simulators doesn't work anymore and i can't build my app without it because the user has to copy and paste api keys in it. Is there an solution for it I have tried to install an other simulator ios version but then the simulator doesn't work on the the new xcode. Have someone already found an solution?

When opening a project or workspace in Xcode 26.4 the most recently active scheme is not restored. Instead, the scheme reverts to the first scheme in the list. I've tried opening and closing Xcode a few times, and removing the user data for a workspace. No luck. Any suggestions or workarounds?

Since I have downloaded latest Xcode version I am having Project Navigator in the Menu Style UI and not in the Tab based UI, the one earlier. Also, I am not able to find any options to change Project Navigator style. Please provide user the option to change UI to either Menu based or Tab based Project Navigator UI ( Projects, Source Control, Bookmark, find etc )

We are encountering an issue in an iOS application where functionality works correctly in Debug builds but fails in Release builds distributed via TestFlight. Details Debug (No Optimization -Onone): Works correctly Release (Optimize for Speed -O): Fails Release with -Onone: Works, but app size nearly doubles Context The issue is related to integration with the Microsoft ONNX runtime library. It appears that the Swift/Clang compiler is aggressively optimizing certain parts of the code in Release builds, possibly removing or altering required logic. Observations The issue started appearing with recent iOS/Xcode updates. No code changes affecting this logic were made recently. Behavior strongly suggests optimization-related side effects. Questions Are there known issues with aggressive optimization (-O) affecting third-party libraries? Are there recommended flags to selectively disable optimization for specific modules or functions? Any tools or diagnostics to identify what is being optimized out? Temporary Workaround Using -Onone resolves the issue but is not viable for production due to significant increase in app size. Any guidance would be greatly appreciated.

Im working on my laptop with Mac OS 15.7.5 and Im using Xcode 26.0.1 and Im trying to simulate the code I've written. It only allows me to simulate on iPhone 16e but it never finishes loading, I also tried using my personal iPhone as a simulator but that doesn't work either. Could it possibly be my storage on why the simulators don't work?

I am unable to install due to the following error: "can't install the software because it is not currently available from the software update server" Mac OS: Tahoe 26.1 CLI: Iterm2 Command : xcode-select --install Output: Command transitions to a GUI installer and attempts to download but fails with the attached error. As a result I am unable to proceed with installing Homebrew from CLI or downloaded pkg

I’m currently working on a macOS application to control a USB camera’s optical zoom via a direct USB connection. My situation: I am using a USB camera that supports optical zoom. I downloaded an open-source project, CameraController. The prebuilt binary provided on GitHub works perfectly, and I can successfully control the camera’s optical zoom. However, when I build and run the same project from source in Xcode, the zoom control UI appears disabled (grayed out). The project compiles without errors. Additionally, I attempted to implement zoom control myself using the UVC protocol in Swift . However, it seems that the zoom control commands are not successfully sent or recognized by the camera. Questions: Why would the prebuilt app work, but the same source code built locally results in disabled zoom controls? Are there known limitations on sending zoom control requests via USB on macOS? Is there a recommended modern approach for controlling optical zoom programmatically via Swift? Any insights, debugging suggestions, or references would be greatly appreciated. Thanks in advance!

Since I have changed of iPhone (yesterday) to run my draft application, I systematically, and instantaneously get a message "The application failed to launch.", i.e. the application successfully built and was downloaded to the new iPhone (Iphone 17 pro - iOS 26.4). I have checked that this new iPhone is well registered on my list of authorized devices. Could you help me to fix this issue ? Here is the verbose attached to the failure: The application failed to launch. Domain: com.apple.dt.CoreDeviceError Code: 10002 User Info: { BundleIdentifier = "com.laurent-guise.ble-laser"; DVTErrorCreationDateKey = "2026-03-30 07:59:46 +0000"; IDERunOperationFailingWorker = IDELaunchCoreDeviceWorker; } The request to open "com.laurent-guise.ble-laser" failed. Domain: FBSOpenApplicationServiceErrorDomain Code: 1 Failure Reason: The request was denied by service delegate (SBMainWorkspace). User Info: { BSErrorCodeDescription = RequestDenied; FBSOpenApplicationRequestID = 0x3868; } The operation couldn’t be completed. The process failed to launch. Domain: FBProcessExit Code: 64 Failure Reason: The process failed to launch. User Info: { BSErrorCodeDescription = "launch-failed"; } The operation couldn’t be completed. Launch failed. Domain: RBSRequestErrorDomain Code: 5 Failure Reason: Launch failed. Launchd job spawn failed Domain: NSPOSIXErrorDomain Code: 85 Failure Reason: Bad executable (or shared library) Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008150-000E19E814A1401C"; "device_isCoreDevice" = 1; "device_model" = "iPhone18,1"; "device_osBuild" = "26.4 (23E246)"; "device_osBuild_monotonic" = 2304024600; "device_os_variant" = 1; "device_platform" = "com.apple.platform.iphoneos"; "device_platform_family" = 2; "device_reality" = 1; "device_thinningType" = "iPhone18,1"; "device_transport" = 0; "launchSession_schemeCommand" = Run; "launchSession_schemeCommand_enum" = 1; "launchSession_targetArch" = arm64; "launchSession_targetArch_enum" = 6; "operation_duration_ms" = 6590; "operation_errorCode" = 1; "operation_errorDomain" = "com.apple.dt.CoreDeviceError.10002.FBSOpenApplicationServiceErrorDomain"; "operation_errorWorker" = IDELaunchCoreDeviceWorker; "operation_error_reportable" = 1; "operation_name" = IDERunOperationWorkerGroup; "param_consoleMode" = 1; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_MTE_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_mtc_enable" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_lldbVersion_component_idx_1" = 0; "param_lldbVersion_monotonic" = 210000160004; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos26.4"; "sdk_osVersion" = "26.4"; "sdk_platformID" = 2; "sdk_variant" = iphoneos; "sdk_version_monotonic" = 2304023700; } System Information macOS Version 26.4 (Build 25E246) Xcode 26.4 (24909) (Build 17E192) Timestamp: 2026-03-30T09:59:46+02:00

Upgraded to Tahoe 26.4 and Xcode 26.4 and realized Xcode is missing the documentation for Foundation. Occasionally, if other (not yet missing) documentation references a Foundation entity, such as a type, clicking on it may open in a web browser pointing to the externally hosted Apple documentation. Anyone else experiencing this or have a workaround (perhaps the documentation files are on disk but were somehow lost / disconnected from the Xcode doc browser)? I checked the release notes for 26.4 and for 26.3 but did not find a mention of anything like that. Filed an issue with Apple, please do too if you are affected so hopefully it will see some love and lead to restoring the documentation. Edited: found some possibly related files in my ~/Library and the newer version v302 (26.4 related, I think, is considerably smaller): du -sh ~/Library/Developer/Xcode/DocumentationCache/* | awk -F/ '{print $NF "\t" $1}' v296 1.0G v302 507M

Using XCUITesting to access images using photos picker. The code is roughly like this: photoPickerButton.click() try await Task.sleep(for: .seconds(2)) let images = app.descendants(matching: .image) .matching(identifier: "PXGGridLayout-Info") // select the first 5 images for ix in 0..<5 { let image = images.element(boundBy: ix) if image.exists { image.click() } } // why do I have to click this twice? Output says the second // click does "Falling back to element center point". app.buttons["Add"].firstMatch.click() app.buttons["Add"].firstMatch.click() Other than the minor annoyance of having to click the Add button twice that works fine. The issue is the second time in the same test I run almost identical code, but only try to select the first image as a test for handling duplicate selections. Doesn't work. The first image returned from the query exists, but is not hittable. This is a testing issue as running the steps manually work fine. The element I want to click is this: Attributes: Image, 0x73511d540, {{1794.0, 745.2}, {98.0, 73.5}}, identifier: 'PXGGridLayout-Info', label: 'February 02, 1:00 PM' Any ideas?

Trying out the new package trait support in Xcode 26.4 and it seems like the default traits for the package are being enabled even when explicitly set to disabled. At first I thought it was something wonky in the Xcode UI around the new support for traits. I've been able to replicate the issue with just two Swift packages, so no Xcode UI for setting the traits. Feature package // swift-tools-version: 6.3 import PackageDescription let package = Package( name: "MyAwesomeFeature", platforms: [ .macOS(.v26) ], products: [ .library( name: "MyAwesomeFeature", targets: ["MyAwesomeFeature"] ) ], traits: [ .trait(name: "SomeBetaFeature"), .default(enabledTraits: ["SomeBetaFeature"]), ], targets: [ .target( name: "MyAwesomeFeature" ), ], swiftLanguageModes: [.v6] ) For the sake of testing I've given it a simple object that just prints if the trait is enabled Inside MyAwesomeFeature public struct SomeObject { func printTraitStatus() { #if SomeBetaFeature print("Beta feature enabled") #else print("Beta feature disabled") #endif } } I then have a second package that depends on the feature and produces an executable // swift-tools-version: 6.3 import PackageDescription let package = Package( name: "SwiftPackageBasedProgram", platforms: [ .macOS(.v26), ], products: [], dependencies: [ .package(name: "MyAwesomeFeature", path: "../MyAwesomeFeature", traits: []) ], targets: [ .executableTarget( name: "MyAwesomeProgram", dependencies: [ .product(name: "MyAwesomeFeature", package: "MyAwesomeFeature") ] ), ], swiftLanguageModes: [.v6] ) If I run MyAwesomeProgram from the command line with swift run I get the output I would expect Build of product 'MyAwesomeProgram' complete! (6.10s) Inside SwiftPM program Beta feature disabled If I run the same program from within Xcode though Inside SwiftPM program Beta feature enabled Program ended with exit code: 0 I've got the sample project available here if anyone wants to try it out. Has anyone else come across anything like this? Very possible I'm just missing something.