Hi all, I’m running into a persistent build issue with my Swift project ORSOFINAL after migrating from Xcode stable to Xcode-beta.app 26 (June 2025 version). ⸻ 💥 Errors displayed: 1. C99 was enabled in PCH file but is currently disabled 2. module file .../ModuleCache.noindex/SwiftShims-AXUM98L131W4...pcm cannot be loaded due to a configuration mismatch with the current compilation 3. missing required module 'SwiftShims' ⸻ 🛠 What I’ve already tried: • xcode-select -s /Applications/Xcode-beta.app/Contents/Developer • Deleted ~/Library/Developer/Xcode/DerivedData, ModuleCache.noindex, Archives, and Products • Ran sudo xcodebuild -runFirstLaunch • Clean Build Folder in Xcode-beta • Verified Command Line Tools setting points to Xcode-beta ⸻ ❓Looking for guidance on: • Whether this is a known bug in Xcode-beta • If SwiftShims/PCM conflicts are expected between versions • Best practices to safely migrate from Xcode stable to beta for Swift-based projects Any advice is much appreciated. Thanks, Mathéo

For Xcode 15 and Xcode 16, whenever I try to use the Refactor->Rename command I get a spinning busy cursor for a short while then I get an alert that says: Rename Failed Refactoring engine failure. This happens on several projects and I've tried removing the derived data folder, but am at a loss to find additional troubleshooting steps. Are there other files I might remove or reset to get my "Refactoring Engine" back into shape?

I'm following the steps laid out in Creating a static framework which states: When a client links and embeds the framework, Xcode 15 or later omits the main binary from the embedded framework bundle because it’s already statically linked into the client. Specifically, I'm adding a new framework target to my project, and then changing the Mach-O type in its build settings to Static Library. What I'm observing when I build (debug or release) is that that the resulting framework folder inside of the app bundle still contains a binary. Furthermore, upon inspecting strings and symbols in both the main app executable and this library binary, it appears that my strings and symbols do end up in the main executable and not in the library binary. Does this mean that this binary is just a stub left behind? Is this intended? Can I safely delete this binary with a build phase script?

I’ve developed an Apple Watch extension for an existing iOS app. When I run the app on the watch via Xcode using the simulator, everything works fine. However, when I try to install it on my iPhone, the Watch app doesn’t show it in the "Available Apps" list, so I can't install it on the watch. The Apple Watch is connected to my iPhone, and I can see other apps available for installation without any issues. I also created a brand new project with watchOS support to troubleshoot, but the same problem occurred. Any ideas on how to resolve this?

Hi! A couple of months ago my app was archiving just fine. Since an xcode update the build fails. Here is what shows at the end of the log. Thank you in advance for any help! Run custom shell script 'Run Script' Failed to package [project folder] Command PhaseScriptExecution failed with a nonzero exit code

I am not able to connect my iPad 10th gen (OS - 18.4.1) with Xcode (OS - 16.3). It is give me error "Failed to find a DDI that can be used to enable DDI services on the device. Usually this means the best DDI we could find for a platform did not have compatible CoreDevice content. Run 'devicectl list preferredDDI' from the command line to get more details on why no valid DDI can be found." I also tried uninstalling and installing Xcode but still the same issue. Please suggest the solution.

I've got a 2019 Intel iMac running Sequoia 15.4.1 and Xcode 16.3. Every time I try to view a storyboard Xcode locks up and beachballs on me. It takes minutes to load the file. When I force-quit Xcode, the report that shows up has this as the reason: Processes reached dispatch thread soft limit (64): launchd_sim [96305] [unique pid 194673], launchd_sim [96260] [unique pid 194628] Deadlock: AppleSpell [1494] thread 0x1df0c4 DispatchQueue 313 -> AppleSpell [1494] thread 0x1df0c4 DispatchQueue 313 Deadlock: AppleSpell [1494] thread 0x1df114 DispatchQueue 86 -> AppleSpell [1494] thread 0x1df114 DispatchQueue 86 Blocked by Deadlock: 1 task - AppleSpell [1494] I'm wondering, why is AppleSpell trying to spell-check a plist file? Is there any way to tell AppleSpell to ignore a file?

My build succeeded but I immediately got the following pop-up error: Executable Path is a Directory Domain: DVTMachOErrorDomain Code: 5 Recovery Suggestion: /Users/myname/Library/Developer/Xcode/DerivedData/Myapp-dwsmxozkmjfflagroxubgbfvahwq/Build/Products/Debug-iphonesimulator/Myapp.app is not a valid path to an executable file. User Info: {DVTErrorCreationDateKey = "2025-04-17 11:54:27 +0000"} Executable Path is a Directory Domain: DVTMachOErrorDomain Code: 5 Recovery Suggestion: /Users/myname/Library/Developer/Xcode/DerivedData/Myname-dwsmxozkmjfflagroxubgbfvahwq/Build/Products/Debug-iphonesimulator/Myname.app is not a valid path to an executable file. System Information macOS Version 15.5 (Build 24F5053f) Xcode 16.3 (23785) (Build 16E140) Applied and Failed Fixes: Upgrade to MacOS 15.5 Beta pod deintegrate/podinstall uninstall and reinstall Xcode Delete DerivedData folder Edit info.plist Executable File name

Hi, The ui error says unable to login, but I'm able to login (because if I don't give the correct password it's a different error). When Xcode tries to fetch the available teams though it errors out. I can successfully login and access my teams on a different machine that's on the same network. So I know the account and network are fine. Here's what the ui shows .. and I'm also including the Xcode logs from Console. Any ideas? Thanks! xcode.log

Hi, I'm currently facing an issue where my React Native app crashes only on a real iPhone. On the simulator and in Xcode preview, the app runs fine. Previously, I had an issue with FlatList regarding props.getItem, which I solved by installing some missing Babel dependencies. After that, everything worked correctly in the simulator. But when I try to open the app on a real device, it shows the splash screen and crashes immediately. I've already done a full clean and reset, including: npx react-native start --reset-cache Deleted node_modules and Pods, reinstalled everything Cleaned build folder via Xcode Deleted DerivedData Restarted Metro bundler and simulator/device The issue only happens on the physical device. Here’s a portion of the crash log IDate/Time: 2025-04-14 19:11:28.6796 -0300 Launch Time: 2025-04-14 19:11:28.5292 -0300 OS Version: iPhone OS 18.3.2 (22D82) Release Type: User Baseband Version: 4.20.03 Report Version: 104 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: SIGNAL 6 Abort trap: 6 Terminating Process: JazminChebar [1973] Triggered by Thread: 0 Last Exception Backtrace: 0 CoreFoundation 0x19a0865fc __exceptionPreprocess + 164 (NSException.m:249) 1 libobjc.A.dylib 0x197601244 objc_exception_throw + 88 (objc-exception.mm:356) 2 JazminChebar 0x1009b2c04 RCTFatal + 568 (RCTAssert.m:147) 3 JazminChebar 0x1009c81f8 __28-[RCTCxxBridge handleError:]_block_invoke + 532 (RCTCxxBridge.mm:1178) 4 libdispatch.dylib 0x1a1e19248 _dispatch_call_block_and_release + 32 (init.c:1549) 5 libdispatch.dylib 0x1a1e1afa8 _dispatch_client_callout + 20 (object.m:576) 6 libdispatch.dylib 0x1a1e29a34 _dispatch_main_queue_drain + 984 (queue.c:8093) 7 libdispatch.dylib 0x1a1e2964c _dispatch_main_queue_callback_4CF + 44 (queue.c:8253) 8 CoreFoundation 0x19a0d2bcc CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE + 16 (CFRunLoop.c:1793) 9 CoreFoundation 0x19a0cf1c0 __CFRunLoopRun + 1996 (CFRunLoop.c:3163) 10 CoreFoundation 0x19a121284 CFRunLoopRunSpecific + 588 (CFRunLoop.c:3434) 11 GraphicsServices 0x1e73914c0 GSEventRunModal + 164 (GSEvent.c:2196) 12 UIKitCore 0x19cc6a674 -[UIApplication _run] + 816 (UIApplication.m:3846) 13 UIKitCore 0x19c890e88 UIApplicationMain + 340 (UIApplication.m:5503) 14 JazminChebar 0x100178708 main + 80 (main.m:7) 15 dyld 0x1c037dde8 start + 2724 (dyldMain.cpp:1338)

So Xcode has projects. And I breakup my code/libraries/targets into those. So why after 20 years of Xcode, can a workspace, that holds projects not display the same project opened in another workspace? The workspace redirects all output the project would normally generate in DerivedData to a completely different folder by default. What this means is I have to shut one workspace, and then open the other workspace with a different set of projects to see the ones that are shared. The workspace can't build because it can't open the project shared with another one that is open. VS sln files don't have this issue, so why do workspace files.

When I execute: geoCoder.reverseGeocodeLocation(location, completionHandler:{[weak self](placemarks, error) in print("reverse geocoding location after altitude: ",location.altitude) print("placemark location first", placemarks?.first?.location?.altitude ?? -1) The input CLLocation has correct altitude 25, instead the location in the output placemarks have altitude 0, when of course they should have the same location. Moreover it is impossible to retrofit any data in the returned placemarks as they are portrayed as a read only property.

I am attempting to generate screenshots at various logical times using a watchOS 11 simulator. % xcrun simctl status_bar "Apple Watch Series 10 (46mm)" override --time 9:06 An error was encountered processing the command (domain=NSPOSIXErrorDomain, code=45): Simulator device failed to complete the requested operation. Operation not supported Underlying error (domain=NSPOSIXErrorDomain, code=45): Status bar overrides not supported on this platform. Operation not supported Using WatchOS Clock Settings gives me at most 59 minutes in which to succeed. Even if I had a physical watch for every series and size, I would have to wait up to 23 hours before being able to generate my marketing screenshots to support various user scenarios. With three settings variations, a minimal wait time to get to good marketable content would be on the order of 1 month per app version.

Blocker: Registering simulator runtime with CoreSimulator failed.

On my M4 Mac running macOS 15.5 using Xcode 16.4 & Xcode CLT 16.4, Swift code in my Swift Package Manager 5.9 project (https://github.com/mas-cli/mas) builds fine against some included Objective-C headers via the following command line: swift build -c release But cannot find modules for the included Objective-C headers when building inside Xcode 16.4 or with the following command line on the same Mac: xcodebuild -scheme mas -configuration Release -destination platform=macOS,arch=arm64,variant=macos The error is: Sources/mas/AppStore/AppleAccount.swift:9:16: error: no such module 'StoreFoundation' How can I get Xcode / xcodebuild to work? Note that the project is normally built by running: Scripts/build which runs: swift build -c release after running the following script, which must be run before any build (swift, Xcode, or xcodebuild) because it generates a necessary file (Sources/mas/Package.swift): Scripts/generate_package_swift I've tried moving the Objective-C headers into include subfolders of their existing module folders, using double quotes instead of angle brackets for the #import statements, having module.modulemap files in the include subfolders or their parent module folder, and moving the module folders one level up the file hierarchy, to no avail. I've also tried various changes to the root-level Package.swift (not the generated one deeper in the hierarchy, which isn't inclined in the build configuration), like making separate library targets for each of the Objective-C modules, various swiftSettings & linkerSettings, etc. Maybe some of those changes would have helped, but maybe they were in incorrect combinations. Thanks for any help.

I have one of our developer when he attempts to login to xcode on his macos device, he get a message that account is not found but he has an account and he logs in to app developer portal with no issue. Thanks

Just wondering if it is possible to configure a secondary macbook to act as a run destination in Xcode, similar to how you would configure an iPhone as a run destination. I have tried connecting my device via USB-C and I can see that my macbook detects the second macbook via USB but it does not show up when trying to add devices in Xcode. I suppose this flow might not be supported?

Where are the local documentation files location on MacOS? None of the existing data on the internet is applicable anymore. Trying to bundle documentation for use in an LLM and the developer site is unusable for crawling. Thanks! *.docset

Hi everyone, I’ve been trying since yesterday to set up an Apple Watch app alongside my iOS app, but it’s not working at all. I created the app by adding a new target, selected watchOS > App, and linked it to my iOS project. When I run the Apple Watch scheme directly, the app works, but if I try to install it on my Apple Watch via the iOS app, it doesn’t work. Every time I tap install, I get a message saying that the installation failed. While reading the documentation, they mention an Info.plist file that is supposed to be generated with the watchOS app, but when I check, I don’t see any .plist file. Is that normal? Thanks for your help.

They said something like hold option or whatever but It didn't seems to work with me...