I recently encountered an issue involving Core Data’s new Composite Attributes feature and thought I would share my experience, as well as seek clarification. I created a composite type where all attributes were mandatory, except for one. Subsequently, I added an attribute to an entity and set its type to that composite type. Upon running the app, the console output the following error: CoreData: error: CoreData: error: Row (pk = 85) for entity ‘(EntityName)’ is missing mandatory text data for property ‘(propertyName)’ The way I resolved this was by removing the composite type attribute from the entity, after which the error no longer appeared. I also observed that in another entity, where a different composite type is used, all the attributes were optional — and no error occurred. This raises the question: why must all attributes in a composite type be optional? Furthermore, why does Xcode not inform the developer of this requirement? I have reviewed both the documentation and the WWDC23 “What’s New in Core Data” session, but neither mentions that having non-optional attributes within a composite type will cause such errors and lead to unpredictable application behaviour. Additionally, this issue remains unresolved in another area I raised previously in this topic: Composite Attributes feature requires tvOS deployment target 17.0 or later Composite Attributes feature requires watchOS deployment target 10.0 or later However, I do not have a tvOS or watchOS target, nor do I intend to add one. Could someone from Apple, or anyone with more experience, please clarify why all attributes within a composite type must be optional? And could it be possible for Xcode to flag this at compile time, rather than failing at runtime? Thank you in advance.

I have an Apple Watch 4. (GPS). It's on version 10.6. I'm trying to deploy a basic app onto it (IOS 18) (WatchOS 9.6). I've set the targets in General for Watch App, Watch AppTest, Watch AppUITest. I still get an Apple Watches watchOS doesn't match App Watch app.app watch02 9.6 deployment target. Upgrade users Apple Watch watchOS version or lower app app.apps deployment target. What can I do to fix this?

I created a new App project, I didn't write any my code, I just built it and install it to my iPhone, then I got the error as below: 无法安装“test” Domain: IXUserPresentableErrorDomain Code: 14 Recovery Suggestion: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.X9zsVD/extracted/test.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Please ensure that the certificates used to sign your app have not expired. If this issue persists, please attach an IPA of your app when sending a report to Apple. User Info: { DVTErrorCreationDateKey = "2025-04-13 03:40:21 +0000"; IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker; } -- Failed to install the app on the device. Domain: com.apple.dt.CoreDeviceError Code: 3002 User Info: { NSURL = "file:///Users/ltf/Library/Developer/Xcode/DerivedData/test-fnnhrmtlclvfdnennxoorbywbuze/Build/Products/Debug-iphoneos/test.app"; } -- Can't install “test” Domain: IXUserPresentableErrorDomain Code: 14 Failure Reason: 无法安装此App，因为无法验证其完整性。 Recovery Suggestion: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.X9zsVD/extracted/test.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) -- Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.X9zsVD/extracted/test.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Domain: MIInstallerErrorDomain Code: 13 User Info: { FunctionName = "+[MICodeSigningVerifier _validateSignatureAndCopyInfoForURL:withOptions:error:]"; LegacyErrorString = ApplicationVerificationFailed; LibMISErrorNumber = "-402620392"; SourceFileLine = 79; } -- Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008120-001E51C011F9A01E"; "device_isCoreDevice" = 1; "device_isWireless" = 1; "device_model" = "iPhone15,5"; "device_osBuild" = "18.3.2 (22D82)"; "device_platform" = "com.apple.platform.iphoneos"; "device_thinningType" = "iPhone15,5"; "dvt_coredevice_version" = "443.19"; "dvt_coresimulator_version" = "1010.10"; "dvt_mobiledevice_version" = "1784.120.2"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 2527; "operation_errorCode" = 14; "operation_errorDomain" = IXUserPresentableErrorDomain; "operation_errorWorker" = IDEInstallCoreDeviceWorker; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 1; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos18.4"; "sdk_osVersion" = "18.4"; "sdk_variant" = iphoneos; } -- System Information macOS Version 15.5 (Build 24F5042g) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-04-13T11:40:21+08:00

Hi, I don't understand why Xcode fails to build my app when following logic was uncommented as part of ternary operator (as highlighted in attachment). Can somebody help me please ?? Thx. ... : shelterViewModel.getShelter(row: row, column: column).productId == ... ? Color.yellow ...

Hi everyone, I recently built an iOS application that fetches the healthkit data with the BGProcessingTask. It is working as expected in the debug with the physical device connected but its not working in Testflight. I printed out the logs but they don't show that the background process's running. Here is my code snippet. func registerBackgroundTask() { BGTaskScheduler.shared.register(forTaskWithIdentifier: taskIdentifier, using: nil) { task in LogManager.shared.addBackgroundProcessLog("registering the background task...") print("registering the background task...") self.handleBackgroundTask(task: task as! BGProcessingTask) } } func scheduleBackgroundHealthKitSync() { print("scheduling background task...") LogManager.shared.addBackgroundProcessLog("scheduling background task...") let request = BGProcessingTaskRequest(identifier: taskIdentifier) request.earliestBeginDate = Date(timeIntervalSinceNow: 60 * 1) request.requiresNetworkConnectivity = true request.requiresExternalPower = false do { try BGTaskScheduler.shared.submit(request) print("BGProcessingTask scheduled") LogManager.shared.addBackgroundProcessLog("BGProcessingTask scheduled") } catch { print("Failed to schedule task: \(error)") LogManager.shared.addBackgroundProcessLog("Failed to schedule task: \(error)", isError: true) print(LogManager.shared.backgroundProcessLogs) } } func handleBackgroundTask(task: BGProcessingTask) { LogManager.shared.addBackgroundProcessLog("handleBackgroundTask triggered") print("handleBackgroundTask triggered") let dispatchGroup = DispatchGroup() dispatchGroup.enter() // Reschedule the background sync for the next time scheduleBackgroundHealthKitSync() var taskCancelled = false // Handling expiration task.expirationHandler = { taskCancelled = true LogManager.shared.addBackgroundProcessLog("Background task expired", isError: true) print("Background task expired") dispatchGroup.leave() } let healthKitManager = HealthKitManager.shared // Start the background sync operation healthKitManager.fetchAndSendAllTypes() { success in if success { LogManager.shared.addBackgroundProcessLog("HealthKit sync completed successfully") print("HealthKit sync completed successfully") } else { LogManager.shared.addBackgroundProcessLog("HealthKit sync failed", isError: true) print("HealthKit sync failed") } dispatchGroup.leave() } // Notify when all tasks are completed dispatchGroup.notify(queue: .main) { // Check if the task was cancelled using your own flag or state if taskCancelled { task.setTaskCompleted(success: false) // Fail the task if it was cancelled } else { task.setTaskCompleted(success: true) // Complete successfully if not cancelled } LogManager.shared.addBackgroundProcessLog("Background task ended with status: \(taskCancelled == false)") print("Background task completed with success: \(taskCancelled == false)") // Logs success or failure } } Here are the logs from my device. scheduling background task... BGProcessingTask scheduled

M3 MBP running Sequoia 15.4.1 and Xcode 16.4 Mac is (old school) AD bound Mac is managed by Intune, and is set to allow apps to be run from anywhere. When we try to build and run anything in Xcode, we get the error in the title. Pertinent log entries: mcxalr{94} ** Denying execute for uid=1474851099 path=/Users//Library/Developer/Xcode/DerivedData/mactest2-gevqwurjuobygdaiwboubirauoxv/Build/Products/Debug/mactest2.app/Contents/MacOS/mactest2 If we run it from an AD account that is set up as a local admin, then we get the OS dialog saying: You don't have permissions to use the application "mactest2." For more information, contact the person who set up your account. If that user logs out, and we log in with a "true" local admin account (UID 501), then we get the same results, BUT the OS dialog gives us the option to grant access to the app. (for whatever reason, the auth dialog seems to be created by ScreenTime.) Signing is set up correctly, but we're not trying to distribute anything, just literally trying to run the generic "hello world" default macOS app project.

I have one of our developer when he attempts to login to xcode on his macos device, he get a message that account is not found but he has an account and he logs in to app developer portal with no issue. Thanks

I am encountering an issue where code coverage data is not showing for my main app in Xcode when running tests for the iOS simulator. However, code coverage is being reported correctly for some modules. Enable Code Coverage Support: YES Xcode 16.2 macOS: 15.3.1 Macbook Pro M1 14-inch, 2021 Despite these configurations, Xcode fails to show code coverage for the main app. Can anyone suggest what might be causing this issue and how to ensure code coverage is correctly reported for the main app during simulator builds?

When renaming A.value, it also causes the value inside the conditional compilation in checkRename to be renamed. How to resolve or avoid this situation? class A { let value = "1" } class B { var value = 0 } func checkRename() { var b = B() #if os(iOS) b.value = 456 #elseif os(macOS) b.value = 789 #endif } Xcode Version 15.4 (15F31d).

Hi, I am currently working on a MacOS App, where I need the undistortion function of opencv. But after I tried to add opencv to my project, I get following error: unexpected service error: The Xcode build system has crashed. Build again to continue. Cleaning the build folder also doesn't help. Does anyone have an idea what could be the issue? Ryan

My app works fine when I load it directly from Xcode to my phone via USB but once I load it to TestFlight the sounds no longer play when the app is not in focus or the phone is locked. I've tried every combination of tools available from the support group and from AI! And I'm out of ideas.

Xcode16.2 加 iOS18 以上的系统加载图片 http 类型的 url 时， http 链接会自动升级为 https，请问有处理方案吗？浏览器报错信息如下：This content was automatically upgraded and should be served over HTTPS.

At the last place I worked it took roughly 5 minutes to do an application build. Which in turn made doing any sort of TDD or ever just regular Unit Tests extremely painful to do as the cycle time was simply too long. But that got me thinking. In recent versions of Xcode, Apple added Previews for SwiftUI Views that basically showed code changes to the View in real time. And Previews were made possible by extremely targeted compilation of the view in question. So... what if instead of a Preview pane in the Xcode IDE there was a Test pane the could be displayed such that Tests for a piece of code could be created and run almost immediately? Perhaps by adding a #Testing section to your code #Testing(MyService.self) // Define the entity to be tested. If you could drop the turnaround time AND provide a test playground for service level code that could speed development of such code greatly... and encourage interactive test development at the same time. What do you think?

Hey, I've been having a lot of problems with Xcode 16 not seeing changes made to code in local Swift packages (the packages are inside the root directory of the project). Whenever I make any change like renaming a variable or type, or adding new methods or whatever, autocomplete doesn't see those changes and when I type in that new type/variable manually it gives me an error. However, building the project still works fine, even with the errors never going away. The only way for it to notice the code changes is to clean the project and build it again which takes a long time. At first, I thought this was connected to the new "Explicitly built modules" feature in Xcode 16, but I turned it off and it still happens. Any ideas what I can try? I'm on the latest Xcode version, but this problem has been happening since Xcode 16 originally came out. Thanks! Dennis

I have Xcode on my mac. I am iOS Dev. I do not know what version of Xcode was before I did next steps, but I could say that I had iOS Simulator 18.3.1. So I update my Xcode to Version 16.3 (16E140). At this version is available iOS Simulator 18.4. But from some time before Xcode separate downloading components and actual Xcode itself. So i make update and do not download latest iOS simulator. What i have: in Xcode -> Settings -> Components under " Other Installed Platforms" i have iOS 18.3.1 and 17.5 in Choose Destination dropdown menu i have nothing. And Xcode say me that i need install iOS Simulator. After some time with ChatGPT I could not do nothing from this. I try go to : Window -> Device and Simulators and here create new simulator with 18.3.1 and make it appear Always. But it didn't help. Solution I did: I download latest version 18.4 because i could not wait because i need fix bug only 1 hour shift and it was this hour so i fast download the simulator. After downloading 18.4 in Choose Destination dropdown it appears all versions of simulaors and 18.3.1 and that i created and 17.5 Question: Does Xcode force to install latest version of iOS simulator? What is the sense of this upgrade that now Xcode is updating faster because it download 8 GB not 16 if eventually I need download 8 GB again ? The new what i could do download Xcode in the evening and Simulator in the morning?

I have the this issue when I run the app on iOS Simulator after updating to app to make it compatible with Xcode-16 and iOS-18. after upgradation to Xcode-16 its giving the above error "Executable path is a directory" .This app work fine on Xcode-15 . Note - The issue with iOS Simulator only. From XCode-16 build is created successfully and installed in iOS device.

I am having issues loading my model from a Swift Package with the following structure: | Package.swift | Sources | - | SamplePackage | - | - Core | - | - | - SamplePackageDataStack.swift | - | - | - DataModel.xcdatamodeld | - | - | - | - Model.xcdatamodel ( <- is this new? ) As mentioned, I am not required to list the xcdatamodeld as a resource in my Package manifest. When trying to load the model in the main app, I am getting CoreData: error:  Failed to load model named DataModel Code: In my swift Package: public class SamplePackageDataStack: NSObject {     public static let shared = SamplePackageDataStack()     private override init() {}     public lazy var persistentContainer: NSPersistentContainer = { let container = NSPersistentContainer(name: "DataModel") container.loadPersistentStores(completionHandler: { (storeDescription, error) in             if let error = error as NSError? {                 fatalError("Unresolved error \(error), \(error.userInfo)")             }         })         return container     }()     /// The managed object context associated with the main queue. (read-only)     public var context: NSManagedObjectContext {         return self.persistentContainer.viewContext     }     public func saveContext () {         if context.hasChanges {             do {                 try context.save()             } catch {                 let nserror = error as NSError                 fatalError("Unresolved error \(nserror), \(nserror.userInfo)")             }         }     } } Main App: import SamplePackage class ViewController: UIViewController { override func viewDidLoad() { &#9;&#9;&#9;&#9;&#9;super.viewDidLoad() &#9;var container = SamplePackageDataStack.shared.persistentContainer         print(container) &#9;&#9;} }

If you need help investigating a crash, please include a crash report in your post. To smooth things along, follow these guidelines: For information on how to get a crash report, see Acquiring crash reports and diagnostic logs. Include the whole crash report as a text attachment (click the paperclip icon and then choose Add File). This avoids clogging up the timeline while also preserving the wealth of information in the crash report. If you’re not able to post your crash report as an attachment, see Can’t Post Crash Report as Attachment below. If you want to highlight a section of the report, include it in the main body of your post. Put the snippet in a code block so that it renders nicely. To create a code block, add a delimiter line containing triple backquotes before and after the block, or just click the Code Block button. If possible, post an Apple crash report. Third-party crash reporters are often missing critical information and have general reliability problems (for an explanation as to why, see Implementing Your Own Crash Reporter). Symbolicate your crash report before posting it. For information on how to do this, see Adding identifiable symbol names to a crash report. If you need to redact the crash report, do so consistently. Imagine you’re building the WaffleVarnish app whose bundle ID is com.example.wafflevarnish but you want to keep your new waffle varnishing technology secret. Replace WaffleVarnish with WwwwwwVvvvvvv and com.example.wafflevarnish with com.eeeeeee.wwwwwwvvvvvvv. This keeps the text in the crash report aligned while making it possible to distinguish the human-readible name of the app (WaffleVarnish) from the bundle ID (com.example.wafflevarnish). Finally, for information on how to use a crash report to debug your own problems, see Diagnosing issues using crash reports and device logs. Can’t Post Crash Report as Attachment Crash reports have two common extensions: .crash and .ips. If you have an .ips file, please post that [1]. DevForums lets you attach a .crash file but not an .ips file (r. 117468172). To work around this, change the extension to .txt. If DevForums complains that your crash report “contains sensitive language”, leave it out of your initial post and attach it to a reply. That often avoids this roadblock. If you still can’t post your crash report, upload it to a file sharing service and include the URL in your post. Post the URL in the clear, per tip 14 in Quinn’s Top Ten DevForums Tips. Getting a Crash Report from the Xcode Organiser The Xcode organiser shows crash reports from customers. If you’re investigating such a crash and want to post a crash report: Navigate to the crash in the Xcode organiser. Note If you can’t see the right crash, check the filter popups at the top. In the list of crashes, secondary click on your crash and choose Show in Finder. That reveals the Xcode crashpoint document (.xccrashpoint) in the Finder. Secondary click on that and choose Show Package Contents. In the resulting Finder window, find a crash report (.crash) that accurately represents the crash you’re investigating and attach that to your forums post. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] Because it’s easy to go from an .ips file to a .crash file. I usually do this by choosing File > Quick Look in the Finder. For more info about these file formats, see this post. Revision History: 2025-08-29 Added the Getting a Crash Report from the Xcode Organiser section. 2024-11-21 Added a recommendation to post the .ips format if possible. 2024-05-21 Added some advice regarding the “contains sensitive language” message. 2023-10-25 Added the Can’t Post Crash Report as Attachment section. Made other minor editorial changes. 2021-08-26 First posted.

We using below command to run unit test and collect coverage: xcodebuild -workspace Demo.xcworkspace -scheme VideoTests -configuration Debug -derivedDataPath ../build/derivedData -destination 'platform=iOS Simulator,id=E6630007-570B-4DEB-A023-2BCE91116A8D' -resultBundlePath './fastlane/test_output/VideoTests.xcresult' -enableCodeCoverage YES -testPlan 'Video' test-without-building | tee '/Users/rcadmin/Library/Logs/scan/VideoTests.log' | xcbeautify -q --is-ci and using xcrun llvm-cov show command to generate coverage report: xcrun llvm-cov show /build/unit-test/coverage/libraries/merged/video.o -instr-profile=/app/ios/build/derivedData/Build//ProfileData/E6630007-570B-4DEB-A023-2BCE91116A8D/video.profdata -show-branches count -show-expansions -show-line-counts -use-color -format=html -output-dir coverage and the html report does not include branch coverage: how to generate the branch coverage?

We are experiencing networking issues in our iOS application when it is built with Xcode 16 or later. Our app includes a video conferencing feature that works reliably when built with Xcode 15 or earlier — we can sustain hour-long video sessions without interruption. However, when the app is built using Xcode 16 or higher, network connections drop after 2–3 minutes during a session. This triggers an auto-reconnect, which succeeds, but the connection drops again after another 2–3 minutes. This loop continues indefinitely. Key Details: The issue only occurs in TestFlight builds. When running the app via Xcode debugger, the issue does not occur. The issue is consistently reproducible in TestFlight builds created with Xcode 16 or later. TestFlight builds created with Xcode 15 do not exhibit this issue. All the videoconferencing runs on C and C++ code What We’ve Tried: Reviewed Xcode 16+ release notes but found no relevant changes or deprecations. Verified app configuration and entitlements. Confirmed that no app-side changes occurred between the working and broken builds. Request: We’re seeking guidance on what changes in Xcode 16+ could be affecting networking behavior in release/TestFlight builds. Any insight into relevant build settings, compiler changes, or runtime behavior differences would be greatly appreciated. Thank you in advance for your assistance.