How can I allow the popup I am encountering while I run my UI tests with video recording in the Github actions. Since these tests are running on VMs, it's not possible to manually click Allow. Also the remote robot cannot interact with OS-level dialogs.

Hello, I'm building this mobile app using Quasar - Capacitor on iOS. The app is working perfectly, but I'm encountering an issue whenever I push the rep I get this error: "Error Unable to open base configuration reference file '/Volumes/workspace/repository/ios/App/Pods/Target Support Files/Pods-App/Pods-App.release.xcconfig'. App.xcodeproj:1" I've tried every possible solution and made sure that everything is set perfectly. Can anyone please help me with that? Thanks in advance, appreciate you 🫶🏻

I have been working on a M1 Mac mini, using my iPad Air M2 running 26.3 iPadOS. Switched to a new M4 Mac mini, went to connect my iPad to run from Xcode and was presented this "The developer disk image could not be mounted on this device." So how can a get an updated DDI? I appreciate any ideas. /Users/robertlawson/Desktop/Screenshot 2026-02-15 at 8.21.50 PM.png

In the availability and pricing section, we have reviewed the plans and we will be upgrading to 50 or 100 million calls/month but before we do, we have a couple questions. Does the API have rate limit or throttling? Do you have additional weather forecast endpoints like hail, radar, or pollen forecast? I see in this thread https://aninterestingwebsite.com/forums/thread/795642 that air quality is not available Thanks

I’m using Developer iOS app to watch WWDC session videos. i notice it doesn’t record a video as watched after I watched it and even manual marking it using Mark as Watch has no effect. I remember the issue started several years ago because some old WWDC videos were marked watches.

Hi, I’m currently developing a watchOS app and ran into an issue where I can’t enable Developer Mode on my Apple Watch. Device info: Apple Watch Series 9 (watchOS 10.4) Paired with iPhone 14 Pro (iOS 17.4.1) Xcode 15.3 (macOS 15.5, Apple Silicon) Issue: When I try to run the app on my physical watch device, Xcode prompts that Developer Mode needs to be enabled. However, there is no approval request on the Apple Watch, and no Developer Mode option appears under Settings → Privacy & Security. I’ve already tried the following: Rebooting both devices Unpairing and re-pairing the watch Erasing and setting up the watch again Signing out and back into my Apple ID Using the latest Xcode version (15.3 and 16.3 both tested) Running clean builds and checking provisioning profiles Attempting install via both simulator and physical device Still no luck — the app will not launch on the Apple Watch due to Developer Mode being disabled, and the option is missing entirely from Settings. I visited an Apple Store Genius Bar, but they couldn’t help and told me to contact Developer Support. I’ve already submitted a support request, but in the meantime I wanted to ask here in case anyone else has experienced this and found a workaround. Thanks in advance.

In the online documentation for InstallerJS, it is stated that the unit for the availableKilobytes property of the target field is kilobytes. Isn't it actually bytes because of a bug in the very first release of macOS that supported InstallerJS? [Q] Has there been a fix in the recent years regarding this property that would explain why the documentation says it's kilobytes? Even though at the time of this writing, the unit is still bytes when you call my.target.availableKilobytes I'm using this call to dump the value of this property in install.log: system.log(my.target.availableKilobytes + ''); Ref. https://aninterestingwebsite.com/documentation/installer_js/target/1811975-availablekilobytes (FB20448952)

We're having issues getting Sign in with Google to function on TestFlight (not experiencing these issues on iOS Browser) with user unable to be authorised and proceed to logged in screens of our app. Below are the three sign-in methods tested and the exact results for each. Button 1: Default Standard Google Sign-In button (Google JavaScript SDK) embedded in the frontend. Uses the normal OAuth browser redirect flow. Auth URL: https://accounts.google.com/o/oauth2/v2/auth?... Sometimes disallowed_useragent error. Other times a 400 invalid_request error. In most cases the callback is never triggered inside the wrapper. Appears that the wrapper does not retain cookies/session data from the external Google window. Button 2: Custom Custom button calling Google OAuth through our own redirect handler. Explicitly set a custom user-agent to bypass disallowed user agent logic. Later removed user-agent override entirely for testing. Added multiple ATS (App Transport Security) exceptions for Google domains. Added custom URL scheme to Info.plist for OAuth redirect. Changing the user-agent had no effect. ATS exceptions + scheme support verified and working. Redirect still fails to propagate tokens back to the WebView. In tests a few weeks ago we got to Google’s login page, but it never returned to the app with a valid code. Now we are consistently getting disallowed_useragent error. Button 3: Default Same as Button 1 however tested outside of Vue.js with just plain JavaScript. Added new Google domain exceptions and updated redirect URIs. Behaviour matches Button 1 Google account selection sometimes worked, however now consitently disallowed_useragent error Additional Technical Attempts User-Agent Modifications Set UA to standard desktop Chrome → no effect. Removed UA override → no effect. ATS / Domain / Scheme Configuration Added: accounts.google.com .googleusercontent.com *.googleapis.com

Hi everyone, I’m hoping someone here can shed some light on what’s going on with Apple’s one-hour security delay when trying to register an iPhone for development use. I’m currently setting up an app build using Expo / EAS and a paid Apple Developer account. Every time I scan the device registration QR code or try to authorise my iPhone as a development device, I get hit with a “security delay — try again in one hour” message. This happens every single time, even if I wait the full hour. The device is the same iPhone I always use, signed in to the same Apple ID, and verified with 2FA. The only thing unusual about my setup is that I’m using Starlink for internet access. Because Starlink uses dynamic IP routing and your exit node changes frequently (depending on which satellite or ground station you’re on), it looks like I’m signing in from a new location each time — sometimes even hundreds of miles apart. It seems that Apple’s security system flags each of these as a “new login” or “new device registration,” then enforces a one-hour safety lockout. That makes it basically impossible to register my device and proceed with iOS builds or testing. Has anyone else run into this problem while using Starlink (or other dynamic-routing connections like VPNs or cellular hotspots)? And if so — is there any known workaround or setting to whitelist a device, stabilise verification, or bypass the repeated one-hour wait? This feels like an over-protective security feature that doesn’t play well with modern satellite internet setups. Any insights from the Apple engineers or other developers would be hugely appreciated. Thanks, Tim Lazenby

I am located in Taiwan and recently updated my Mac to the latest OS and installed the newest Xcode. However, I’m experiencing extremely slow download speeds when trying to add the iOS 26.2 Simulator Runtime (approx. 8GB) via Xcode > Settings > Platforms. It is currently downloading at a rate of only 500MB per hour, which is impractical. I have checked the official downloads page but couldn't find a standalone DMG link for this specific version. My questions are: Is there a direct download link (DMG) available on the Apple Developer portal for the iOS 26.2 Simulator? If no direct link exists, are there any recommended methods to accelerate the download? (e.g., using terminal commands or changing DNS settings). Any help or direct URLs would be greatly appreciated. Thank you!

Im getting this specific error 'Apple 403 detected - Access forbidden' when trying to build my app, my previous 10 builds all succesfully work but now it keeps on giving this error. I'm guessing its because of a new agreement email I recieved. But when i got to both developer website and app store connect there is no new agreements to accept. I'm quite stuck. Any help appreciated. Thanks

Hi Support Team, I am new here. I am unable to add my fonts to the asset catalog there is no option to add new font set when I click the plus sign. When I drag my files in they show up as data. I have a Contents.json in the font folder called BeVietnamProFont.font. Is there something I am doing wrong? Thanks SO much! { "info": { "version": 1, "author": "xcode" }, "properties": {}, "fonts": [ { "filename": "BeVietnamPro-Black.ttf", "weight": "black", "style": "normal" }, { "filename": "BeVietnamPro-BlackItalic.ttf", "weight": "black", "style": "italic" }, { "filename": "BeVietnamPro-Bold.ttf", "weight": "bold", "style": "normal" }, { "filename": "BeVietnamPro-BoldItalic.ttf", "weight": "bold", "style": "italic" }, { "filename": "BeVietnamPro-ExtraBold.ttf", "weight": "heavy", "style": "normal" }, { "filename": "BeVietnamPro-ExtraBoldItalic.ttf", "weight": "heavy", "style": "italic" }, { "filename": "BeVietnamPro-ExtraLight.ttf", "weight": "ultralight", "style": "normal" }, { "filename": "BeVietnamPro-ExtraLightItalic.ttf", "weight": "ultralight", "style": "italic" }, { "filename": "BeVietnamPro-Light.ttf", "weight": "light", "style": "normal" }, { "filename": "BeVietnamPro-LightItalic.ttf", "weight": "light", "style": "italic" }, { "filename": "BeVietnamPro-Regular.ttf", "weight": "regular", "style": "normal" }, { "filename": "BeVietnamPro-Italic.ttf", "weight": "regular", "style": "italic" }, { "filename": "BeVietnamPro-Medium.ttf", "weight": "medium", "style": "normal" }, { "filename": "BeVietnamPro-MediumItalic.ttf", "weight": "medium", "style": "italic" }, { "filename": "BeVietnamPro-SemiBold.ttf", "weight": "semibold", "style": "normal" }, { "filename": "BeVietnamPro-SemiBoldItalic.ttf", "weight": "semibold", "style": "italic" }, { "filename": "BeVietnamPro-Thin.ttf", "weight": "thin", "style": "normal" }, { "filename": "BeVietnamPro-ThinItalic.ttf", "weight": "thin", "style": "italic" } ] } ![]("https://aninterestingwebsite.com/forums/content/attachment/56835f04-d1c1-468f-808b-9a786562d367" "title=Screenshot 2025-07-13 at 1.05.05 PM.png ;width=539;height=630")

I am a solo developer building a cross-platform voice assistant app using Capacitor (with HTML, JS) and Xcode for the iOS version. The app is called "Echo Eyes," and it already functions well as a Progressive Web App (PWA). However, the iOS build has been completely blocked due to persistent sandbox permission errors from macOS during the CocoaPods framework embedding phase. This issue has caused severe disruption to my project and personal well-being, and I am writing to formally request assistance in identifying a clear solution. I am not a beginner and have followed all known best practices, forums, and Apple guidance without success. What I’ve Built So Far: Fully working PWA version of the app (voice input, HTML/JS interface) Capacitor initialized with ID: com.echo.eyes.voice Capacitor iOS platform added with CocoaPods App runs fine until Xcode reaches: [CP] Embed Pods Frameworks The Exact Problem: Sandbox: bash(12319) deny(1) file-read-data /Users/Shared/projects/Echo_Mobile/ios/App/Pods/Target Support Files/Pods-App/Pods-App-frameworks.sh Command PhaseScriptExecution failed with a nonzero exit code Clarification: This is not an HTML/JS issue. The failure occurs in Xcode long before web assets are embedded into the bundle. The shell script /Pods-App-frameworks.sh cannot be read due to macOS sandbox restrictions. Everything I’ve Tried: Gave Xcode and Terminal Full Disk Access Ran: sudo xattr -rd com.apple.quarantine on the entire Pods directory Added /bin/bash and /bin/sh to Full Disk Access (after confirming the exact shell via $SHELL) Attempted to disable Gatekeeper via Terminal: sudo spctl --master-disable (confirmed not effective without GUI toggle) Tried relocating project to /Users/Shared/projects/ Cleaned build folder, removed derived data, reinstalled pods Debugged shell usage with: echo "▶️ Embedding under shell: $SHELL" in the [CP] Embed Pods Frameworks script Attempted to grant shell access to Documents Folder, Desktop, and more via Files & Folders Current State: Despite following all known and recommended steps, Xcode continues to return the same sandbox error. The shell script that embeds the CocoaPod frameworks is denied permission to read its own contents by macOS. What I Am Asking For: Is this a known issue in current versions of macOS or Xcode regarding sandbox denial for shell execution inside Pods? Is there a recommended method to grant /bin/bash or /bin/sh permission to read and run these scripts under Xcode without compromising system security? Is moving the project outside /Users (e.g. to /Projects) the only real workaround? Are there official Apple workarounds or entitlements available for developers encountering this? Personal Note: This issue has caused significant emotional and physical distress. I’m building this app as a personal healing tool and companion. I’ve poured months of work into this and done everything I can to follow Apple’s development guidelines. I’m not asking for hand-holding — only a clear, respectful response confirming whether this is expected behavior and what can be done to resolve it. Thank you for your time and understanding.

Hi, I'm generating MusicKit JWT tokens on my backend side and using it on the client side to query the Apple Music API. One concern I have is accidentally over issuing the scope of this JWT, resulting in accidental access more services than intended like DeviceCheck or APNS. Other than using separate keys for MusicKit and other services, is there a way to limit the generated JWT to only the Apple Music API (https://api.music.apple.com/v1/*) using the JWT payload scope?

Hey guys! I downloaded Apple’s Icon Composer to build my iOS 26 app icon. I exported my SVG from Illustrator (and verified it through Canva and the W3C validator). However, when I import it into Icon Composer, it looks really weird . There are these bubble-like artifacts appearing in the center. Here's my orignal svg icon file trace-logo.txt Any help will be appreciated! Best, Justin

I am running Appium tests on an iOS 18 simulator, and I am encountering an intermittent issue where the device screen gets locked unexpectedly during the tests. The Appium logs show no errors or unusual activity, and all commands appear to be executed successfully. However, upon reviewing the device logs, I see entries related to the lock event, but the exact cause remains unclear. SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] lockUIFromSource:Boot options:{ SBUILockOptionsLockAutomaticallyKey: 1, SBUILockOptionsForceLockKey: 1, SBUILockOptionsUseScreenOffModeKey: 0 } SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] -[SBTelephonyManager inCall] 0 SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] LockUI from source: Now locking Has anyone experienced similar behavior with Appium on iOS 18, or could there be a setting or configuration in the simulator that is causing this issue?

I am integrating On Demand Resources into my Unity game. The resources install without any problems if the internet connection is stable: all resources are installed. While testing various scenarios without an internet connection, I encountered the following problem: if I turn off the internet during installation, I don't get any error messages, but if I turn the internet back on, the download no longer continues (and I still don't get an error). If I reopen the application with a stable internet connection, the download will always be at 0%. Please tell me what I am doing wrong. #import "Foundation/Foundation.h" #if ENABLE_IOS_ON_DEMAND_RESOURCES #import "Foundation/NSBundle.h" #endif #include <string.h> struct CustomOnDemandResourcesRequestData; typedef void (*CustomOnDemandResourcesRequestCompleteHandler)(struct CustomOnDemandResourcesRequestData* handler, const char* error); #if ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { NSBundleResourceRequest* request; }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { NSMutableArray* tagArray = [NSMutableArray array]; for (int i = 0; i < tagCount; i++) { const char* tag = tags[i]; if (tag != NULL) { [tagArray addObject:[NSString stringWithUTF8String:tag]]; } } NSSet* tagSet = [NSSet setWithArray:tagArray]; CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); data->request = [[NSBundleResourceRequest alloc] initWithTags:tagSet]; [data->request beginAccessingResourcesWithCompletionHandler:^(NSError* error) { dispatch_async(dispatch_get_main_queue(), ^{ const char* errorMessage = error ? [[error localizedDescription] UTF8String] : NULL; handler(data, errorMessage); }); }]; return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { [data->request endAccessingResources]; delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return data->request.progress.fractionCompleted; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { float priority = (float)data->request.loadingPriority; return priority; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { if (priority < 0.0f) priority = 0.0f; if (priority > 1.0f) data->request.loadingPriority = NSBundleResourceRequestLoadingPriorityUrgent; else data->request.loadingPriority = (double)priority; } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { NSString* resourceStr = [NSString stringWithUTF8String: resource]; NSString* path = [[data->request bundle] pathForResource: resourceStr ofType: nil]; if (path == nil) { return NULL; // или другое значение по умолчанию } const char* result = strdup([path UTF8String]); // копируем строку return result; // в C# нужно будет освободить память } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { free((void*)str); } #else // ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); if (handler) handler(handlerData, NULL); return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { return NULL; } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { } #endif // ENABLE_IOS_ON_DEMAND_RESOURCES

I am trying to add promotional offers in my iOS App. The signature is being verified through a google cloud function. My user id, signature, and product and offerIds return perfect. Promotional offer appears in the payment sheet as well. When applying for payment, the "ding" sound comes as well. But then I get the UIAlert with Unable to Purchase Contact developer. Error code in logs is 3903

iphone 15 pro max ios 26 Stuck at the developer mode startup interface and unable to swipe up.