Hello everyone, I'm hoping to get some guidance on a frustrating codesigning issue. I have a macOS application that successfully completes the entire notarization and stapling process, but it is still rejected by Gatekeeper during the final verification step. The rejection only happens when I apply the entitlements that I believe are necessary for my app's functionality. The application is built with PyInstaller and has the following components: A main executable written in Python. A bundled Tcl/Tk instance for the GUI. Embedded Playwright components, which include the Node.js runtime and a full Chromium browser instance. These are located deep inside the .app bundle. The Problem The core of my application relies on Playwright to perform some automated tasks, and its bundled Chromium browser requires specific entitlements to function under the Hardened Runtime. Specifically, it needs com.apple.security.cs.allow-jit and com.apple.security.cs.allow-unsigned-executable-memory. My signing process is as follows: Prepare Entitlements: I use two separate .plist files: main_app_entitlements.plist: This is for the main Python executable and only contains com.apple.security.cs.allow-jit. jit_helper_entitlements.plist: This is for the node and Chromium Helper executables within the Playwright framework. It contains both com.apple.security.cs.allow-jit and com.apple.security.cs.allow-unsigned-executable-memory. Inside-Out Signing: I perform a deep signing process. I find all binaries, dylibs, and frameworks, sort them by path length (deepest first), and sign each one individually with the appropriate entitlements. The main .app bundle is signed last. Notarization: I zip the .app bundle and submit it using xcrun notarytool submit --wait. The tool reports a successful notarization every time. Stapling: I use xcrun stapler staple on the .app bundle, and it confirms that the ticket was successfully stapled. The point of failure The final step is to verify the result with spctl: spctl --assess --type execute --verbose --ignore-cache "MyApp.app" This is where it fails. The output is: MyApp.app: rejected source=Unnotarized Developer ID This "Unnotarized Developer ID" message is confusing because xcrun notarytool and stapler both report complete success. The crucial detail If I run the entire process without any entitlements—just signing with the Hardened Runtime enabled—the final spctl assessment passes. However, the application then crashes at runtime as soon as it tries to use Playwright, which is expected since the browser helpers are missing their required JIT entitlements. My question Is there a known issue where using com.apple.security.cs.allow-jit or com.apple.security.cs.allow-unsigned-executable-memory on nested helper executables can invalidate an otherwise successful notarization? Is my strategy of applying different, granular entitlements to different executables within the same app bundle correct? Could the issue be related to how or when these entitlements are applied during an "inside-out" signing process? Is there a better way to structure the signing of these complex components? I'm confident the notarization itself is working, but it seems Gatekeeper's local assessment is stricter and is being tripped up by my entitlement configuration. Thank you in advance for any help or suggestions you can provide

Hello, i have a problem. From one day to another i get following error (I never experienced this error with the same profile before) while trying to build and release my app via fastlane: exportArchive Provisioning profile "" doesn't support the External Link Account capability. Looking in the App developer website, it seems, that the existing and valid profile includes this capability. On the other side, inspecting the profile via xcode profile download, there is no hint that this capability is enabled. Any suggestions? Thanks!

In the past it was relatively easy to download from the developer portal both the app signing and installer signing certs so that I could sign AppleScripts from Script Editor when exporting them and when building packages in Jamf Composer. I went to set that up today and it seems things have changed in the last few years since I've had to set this up. I've been unable to sort this out and would love some help. I'm looking for a tutorial on doing this that walks someone step-by-step through the process for obtaining the certs (yes, I have dev account) and setting them up in keychain and then making use of them. Thanks!

Hi everyone, I'm working with a third party to integrate their USB driver into our app and I'm wondering if iPadOS supports bundling a prebuilt .systemextension file with the entitlement com.apple.developer.system-extension.redistributable into our app that has the com.apple.developer.driverkit.communicates-with-drivers entitlement? If not, is there a way to bundle a third party USB driver into our iPad app?

I have tried again and again to generate and install the .mobileprovision on my device for testing apps following the exact instructions. I cannot get this to work. When I tap the .mobileprovision on the device I get the error "Profile Error - This profile cannot be installed." In Xcode in the console as I try to install the profile, this is what it shows: `profiled (ManagedConfiguration) Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError and then profiled Desc : Invalid Profile Sugg : Invalid Profile US Desc: Invalid Profile US Sugg: Invalid Profile Domain : MCInstallationErrorDomain Code : 4000 Type : MCFatalError ...Underlying error: NSError: Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError I have been at this for days and cannot get it to work. Any help would be appreciated

Hello, I'm developing a feature for my app, that allows users to challenge their friends. The friend request functionality is built using Universal Links, but I've run into a significant issue. The Universal Links are correctly deep-linking into the app. However, once the app opens, nothing happens—the friend request acceptance or rejection flow does not occur. This prevents users from completing friend requests and building their friend list. Here are examples of the Universal Links I'm generating: https://www.strike-force.app/invite?type=invite&userID=... https://www.strike-force.app/invite?type=invite&friendRequestID=... https://www.strike-force.app/profile?userID=... I've recently updated my cloudflare-worker.js to serve a paths array of ["*"] in the AASA file, so I believe the links themselves should be valid. Technical Details & Error Logs In the console, I am consistently seeing the following error message: Cannot issue sandbox extension for URL:https://www.strike-force.app/invite?token=7EF1E439-090B-4DF2-BE64-9904F50A3F8B Received port for identifier response: <(null)> with error:Error Domain=RBSServiceErrorDomain Code=1 "Client not entitled" UserInfo={RBSEntitlement=com.apple.runningboard.process-state, NSLocalizedFailureReason=Client not entitled, RBSPermanent=false} elapsedCPUTimeForFrontBoard couldn't generate a task port This error appears to be related to entitlements and process state, but I am not sure if it's the root cause of the Universal Link issue or a separate problem. The 'Client not entitled' error on line 3 has had me chasing down entitlements issues. But, I've added the Associated Domains entitlement with the proper applink URLs and verified this in my Developer Portal. I've regenerated my provisioning profile, manually installed it, and selected/de-selected Automatically Manage Signing. As well I've verified my AASA file and it's correctly being served via HTTPS and returning a 200. curl -i https://strike-force.app/.well-known/apple-app-site-association curl -i https://www.strike-force.app/.well-known/apple-app-site-association I am looking for guidance on why the friend request flow is not being triggered after a successful deep-link and how I can fix the related error. Any insights or suggestions would be greatly appreciated.

All libraries are getting rejected with errors like: not valid for use in process: mapping process and mapped file (non-platform) have different Team IDs

I use the 'notarytool' to notarize applications and .pkg installers for Developer ID distribution. When using the notary tool with a fresh Apple Developer account, the notarization process remains stuck in the 'In progress' state. However, if I try the same app with an older developer account (one that has notarized at least one app in the past), the notarization works. All agreements are accepted in developer portal and Appstore Connect.

Hello, Unable to see the App Sandbox entitlement while creating a new App ID. Have tried to recreate APP ID multiple times. Don't see the option in Developer portal.

Looking for some assistance and having an Apple Signing Certificate for our Audio Units Plugin.

Hello Apple Developer Support, We are experiencing an issue when programmatically installing a trusted root certificate on EC2 macOS instances (ARM-based), running the latest version of macOS 14.7.5 (Build 23H527). We are using the following command as part of our automated setup process: sudo security authorizationdb write com.apple.trust-settings.admin allow sudo security add-trusted-cert -d -r trustRoot -k /Library/Keychains/System.keychain "$CERT_NAME" sudo security authorizationdb remove com.apple.trust-settings.admin This fails with the following message: SecTrustSettingsSetTrustSettings: The authorization was denied since no user interaction was possible In the past, as sugested in other posts (https://aninterestingwebsite.com/forums/thread/671582) we were able to bypass this issue by running: sudo security authorizationdb write com.apple.trust-settings.admin allow This worked successfully in prior versions, including earlier 14.x releases, and continues to work on Intel-based macOS instances. However, in macOS 14.7.5 (on ARM), this approach no longer works. We suspect this may be due to a change in how System Integrity Protection (SIP) is enforced, especially on EC2 ARM. Questions: Has Apple introduced any changes in macOS 14.7.5 that prevent modifying trust settings via security CLI on headless or non-interactive sessions? Is there an approved or documented way to install system-level trusted certificates programmatically on macOS 14.7.5 (ARM)? Are there alternatives for setting trustRoot certs in non-GUI environments, such as virtualized or cloud-hosted macOS instances? As further information we were thinking to use MDM Profiles but looks like it is also blocked Thanks

Hi, I recently got a consistent delay from notary tool. I have viewed all your suggestions and understand that it "occasionally" will have further review and take longer time, but then it will be faster. However, in my case, my app although is accepted many times. It is still significantly delay. It is a native macOS app called ConniePad. Whenever I submit, it took me 2 days or more to finish notarise, which significantly affect my business. Could you please have a look on it. For log detail about the time, and the ids: -------------------------------------------------- createdDate: 2025-04-05T22:54:45.815Z id: 998b5aa8-fc9c-4469-98fe-950d815e734e name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-05T21:32:22.679Z id: c7b1ab49-6f46-4998-8d06-2ffe8a180c8f name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T08:39:52.594Z id: aa33d9d0-9d2f-4296-8fc3-d7e0b404596b name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T01:23:31.077Z id: b0333d78-497d-491c-b36c-bdfb64520296 name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T01:17:20.925Z id: 83aa12f2-f1bb-457f-940a-4c2281cf8a5f name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T01:12:52.932Z id: 0a921069-fb37-469a-bfb0-6be82e9320ba name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T01:03:30.584Z id: a607fe3c-d10f-43d6-a184-e97df7b632fd name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T00:52:47.322Z id: c42d0ca0-db8a-4431-b5b4-646ccfcad003 name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-03T00:28:18.626Z id: 7ef8777f-7add-4440-abb5-3c0b19cf92d4 name: ConniePad.app.zip status: Invalid -------------------------------------------------- createdDate: 2025-04-03T00:24:37.320Z id: 36bb1285-0aeb-4c48-b23c-fac737a3d93f name: ConniePad.app.zip status: Invalid -------------------------------------------------- createdDate: 2025-04-02T23:59:27.940Z id: bb4578a5-a67b-49e8-afd0-a9d707c10091 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-02T08:51:38.295Z id: 93ff89f4-98d3-45ac-9ee8-9483726a9666 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-02T08:19:13.762Z id: 9e4a62df-3d8a-4cfa-ae9e-56ff35ffe137 name: ConniePad-ConverterTool.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-02T04:15:34.508Z id: 7ee43b74-f73f-462a-bb3d-f6bc53b1cb80 name: ConniePad-ConverterTool.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-02T02:11:53.312Z id: d675e8f6-dc30-48e9-9269-9bc376f1b29e name: ConniePad-ConverterTool.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-02T01:30:32.768Z id: 9901f125-4355-4812-936b-97578ac2de2f name: ConniePad-ConverterTool.zip status: Accepted -------------------------------------------------- createdDate: 2025-04-01T20:47:26.035Z id: a79265bc-8ad3-4a4b-ae39-150801aa9da9 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-18T22:39:54.189Z id: b808b676-a41c-4536-b4fd-4b567701adcb name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-18T05:21:23.607Z id: 797f5d4f-cd94-4511-9217-11e57c2c7ac3 name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-18T05:18:30.707Z id: c5b5c260-fb7f-4bda-9548-f5b7e57cb2f3 name: ConniePad.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:45:37.831Z id: f24c1017-9171-4796-bf97-ea47ef83f7ce name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:38:17.981Z id: 8dd0ea7e-e810-48f9-a48f-62dcc1406284 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:33:27.649Z id: 704e339a-4d99-4e5e-8414-deb8b26c57ac name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:32:06.925Z id: 8e9b09b6-e061-4361-abc1-0bbd8f33b599 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:26:52.444Z id: 2b564641-eb87-4de9-a59c-ff5362b8bf4a name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:22:04.790Z id: 1aa158bd-0afd-4c60-8e2f-3029388710ab name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T06:17:17.141Z id: 3bffcf1d-2fd7-41ba-b70c-f85837499736 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-17T02:38:47.102Z id: 2dd2fb47-7dff-4f30-b2e0-d8c2bfcf10f5 name: ConniePad.app.zip status: Accepted -------------------------------------------------- createdDate: 2025-03-14T03:23:54.671Z id: 5cafb2a9-03e3-468e-b918-ff24b17fceee name: ConniePad.app.zip status: Accepted

Hello, I recently had my Electron app notarized by Apple and then performed the following steps: Stapling the Notarization Ticket: xcrun stapler staple "appPath/Aiparalegal.app" Zipping the App for Distribution: ditto -c -k --keepParent "appPath/Aiparalegal.app" theAIParalegal.zip However, after unzipping and attempting to launch the app, macOS displays the following message: Apple could not verify "theAIParalegal" is free of malware that may harm your Mac or compromise your privacy. Yet, when I run validation using: xcrun stapler validate "theAIParalegal.app" I receive confirmation: The validate action worked! spctl -a -vvv -t install "theAIParalegal.app" theAIParalegal.app: accepted source=Notarized Developer ID origin=Developer ID Application: NIPartnership LLC (M92N2796Q9) Could you help me understand why the notarization validation appears successful, yet macOS still displays this security warning? Any advice on how to resolve this would be greatly appreciated. Thank you!

Hello everyone. I have a simple doubt, I receive an email informing that the Apple Distribution certificate will expire. I create one new in the Developer portal with one year duration. My doubt is, I need to do something more like open again the app in Xcode, insert new certificate and build it again, send to apple and everything? Or just creating this certification is enough? Is possible to increase this certification time or auto renew? Thank you!!!

I have an app that runs as a status bar app, mostly. I have set the following in the info.plist file for the app: <key>Application is agent (UIElement)</key> <true/> However, I get a compile error: Provisioning profile Mac Team Provisioning Profile: yout.Drive doesn't include the Application is agent (UIElement) entitlement. Checking the entitlements, I do not see this entitlement anywhere. Where and how do I set this?

An open-source app that I bundle for macOS needs to use the disable-library-validation entitlement. In spite of TN3125: Inside Code Signing: Provisioning Profiles | Apple Developer Documentation#Entitlements-on-macOS claiming that hardened runtime entitlements don't need provisioning profiles and the app successfully notarizing, trying to run the app fails with the error "Disallowing because no eligible provisioning profiles found". So I created a provisioning profile, but when creating the App ID the only selection that seemed relevant was Hardened Runtime. That turns out not to include disable-library-validation so now launching fails with "Unsatisfied entitlements: >com.apple.security.cs.disable-library-validation" What's the right capability?

Hi, I need to bundle an additional binary along my yet published application. It is a Audio Unit test application. My yet published application implemented Audio Unit plugin support. But upload is always rejected: Validation failed (409) Invalid Provisioning Profile. The provisioning profile included in the bundle com.gsequencer.GSequencer [com.gsequencer.GSequencer.pkg/Payload/com.gsequencer.GSequencer.app] is invalid. [Missing code-signing certificate.] For more information, visit the macOS Developer Portal. (ID: ****) I have followed the instructions here: Embedding a helper tool in a sandboxed app but no luck. Does anyone know whats going on? I use Transporter to upload the application, the embedded.provisioningprofile is copied from Xcode build and code signing is done manually.

In XCode I create and export a notarized app for "direct distribution". I then create a tar file of the exported .app to distribute to my users. Until today this worked fine. Now when the users try to run the app it pops up a dialog saying "app is damaged and can't be opened. You should move it to the Trash." It is possible to ctrl-click on the app and force it to run but, I think, whether this works or not will depend on system settings and not all users have root access to modify settings. Even simply copying the .app folder from the command line will cause this error.

This math-educational 3D-graphics courseware utilizes Java3D, which sits on top of hardware-dependent JOGAMP binaries (which instruct at the GPU-level). This code signing command applied to the installer .dmg: codesign -s "myName" --force --options runtime ~/DFG2D_MacOS_Manufacturing/MacOSInstallers/DFG2D_Mac_J1602_x86/DataflowGeometry2D-1.0.300.dmg is supposed to force signing of all the embedded binaries, BUT the notary tool finds about 25 jogamp-fat dynamic libraries (/ *.dylib) UNSIGNED. Processing complete id: 23d81a99-4087-48d2-a567-8072dd2820fe status: Invalid pierrebierre@Pierres-iMac ~ % xcrun notarytool log 17d2fe94-f38a-47d4-9568-cf4dc65f24c9 --apple-id "xxxxxxxxxxx" --team-id "XXXXXXXXX" --password pwpwpwpwpw { "logFormatVersion": 1, "jobId": "17d2fe94-f38a-47d4-9568-cf4dc65f24c9", "status": "Invalid", "statusSummary": "Archive contains critical validation errors", "statusCode": 4000, "archiveFilename": "DataflowGeometry2D-1.0.300.dmg", "uploadDate": "2025-07-13T21:28:21.147Z", "sha256": "57320c4ad4a07f144336084152bf7e3328f8c5694dd568d2cfd23a596b5b3b13", "ticketContents": null, "issues": [ { "severity": "error", "code": null, "path": "DataflowGeometry2D-1.0.300.dmg/DataflowGeometry2D.app/Contents/app/DFG2D_Mac_x86_300.jar/lib/jogamp-fat/jogamp-fat.jar/natives/macosx-universal/libnativewindow_awt.dylib", "message": "The binary is not signed.", "docUrl": "https://aninterestingwebsite.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087721", "architecture": "x86_64" }, { "severity": "error", "code": null, "path": "DataflowGeometry2D-1.0.300.dmg/DataflowGeometry2D.app/Contents/app/DFG2D_Mac_x86_300.jar/lib/jogamp-fat/jogamp-fat.jar/natives/macosx-universal/libnativewindow_awt.dylib", "message": "The signature does not include a secure timestamp.", "docUrl": "https://aninterestingwebsite.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087733", "architecture": "x86_64" }, What is your advice on how to get these binaries signed?

I've successfully distributed a Java-based app .dmg from my intel iMac, but am trying to port over the signing authority ( Certificate and Identity) to an M2. I'm following the "backup your Identities" recipe to make a .p12 file, but I can't complete the Export. The .p12 file format option is greyed out (while .pem and .cer are offered). What could be causing this? I can sign my .dmg installers from this computer, so codesign is happy with what it is seeing in the Keychain.