Hello all, I’m hoping someone here has gone through the process of integrating an ERP system with the Apple GSX API and can offer some guidance. We’re currently working with an AASP who asked us to integrate our ERP with the Apple GSX API. It’s the first time for both of us, and we’re a bit stuck on how to properly get started. The AASP contacted their regional manager, who confirmed that an NDA and an Apple Developer Account would be necessary. However, he hasn’t handled this type of integration before and is still seeking internal guidance. That was a few months ago, and due to his workload, the AASP hasn’t heard back from him yet. Meanwhile, we’ve already enrolled in the Apple Developer Program and opened a support case, but we’ve been redirected to the forums since our case goes beyond standard support. So now we’re trying to understand: What steps need to be completed by the AASP? What are the steps we, as the ERP provider, need to take in order to receive API access? Are there any specific documents, applications, or technical requirements we should prepare in advance? We’d really appreciate any guidance or insight from others who have gone through this process — or even partial answers to help us move forward. Thanks in advance for your time!

Target Device: iPhone 13, iOS 18.5, enroll to MDM by enrollment profile Command: Response: Anyone could help?

Hello, I have an Apple Developer Enterprise account, and Apple Support has already enabled MDM for my account. I successfully downloaded and installed my MDM Vendor Certificate (it shows up in Keychain as MDM Vendor: [My Company Name] with its private key). Here’s what I’ve done so far: Exported the Vendor Certificate + private key as a .p12, then converted to .pem and .key using OpenSSL. Generated an unsigned CSR with CN=com.apple.mgmt.External. using OpenSSL. Attempted to sign the CSR using: my Vendor certificate the Vendor private key Apple Worldwide Developer Relations (WWDR) intermediate certificate OpenSSL smime -sign command with DER output Problem: Every time I try to upload the vendor-signed CSR to the Apple Push Certificates Portal, I get an error (CSR rejected). Sometimes OpenSSL even fails with “unable to load certificates” depending on how the WWDR certificate is included. My Questions: What is the correct OpenSSL command and certificate chain Apple expects for signing the CSR? Do I need to include any additional intermediates besides WWDR? Is there an official Apple reference example for generating the vendor-signed CSR that the Push Certificates Portal will accept? Any guidance from the community (or someone who has successfully done this end-to-end) would be greatly appreciated. Thank you, Sergio Sanchez

Hello folks, I stumbled upon a weird CNContact serialization problem. I use the Contacts framework to update the AIM field, which is one of the instantMessageAddresses within a single Contact. Here is the simplified code I used: func updateAIMFieldOn(contact: CNContact, aimValue: String) { do { guard let mutableContact = contact.mutableCopy() as? CNMutableContact else { logger.error("[CM] Couldn't update contact with aim \(aimValue)") return } var updatedAddresses = mutableContact.instantMessageAddresses updatedAddresses.append(CNLabeledValue(label: "", value: CNInstantMessageAddress(username: aimValue, service: CNInstantMessageServiceAIM))) mutableContact.instantMessageAddresses = updatedAddresses let saveRequest = CNSaveRequest() saveRequest.update(mutableContact) try CNContactStore().execute(saveRequest) logger.verbose("Contact's AIM updated successfully!") } catch { logger.error("Couldn't update contact") } } And after serializing the contact to data, and then deserializing, the contact got two AIM fields with the same value: X-AIM;type=pref:some:part:of_my_aim_value IMPP;X-SERVICE-TYPE=AIM;type=pref:some:part:of_my_aim_value Why does it work in this manner? Is it possible that ":" char causes that? Format of my aim username is {some:part:of_my_aim_value}. I didn't find any information in the docs. Thanks!

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. I am currently running into two specifc issues while continuing to implement the app.managed configuration which are quite frustrating and I will detail them below Unlike MDM where an application could be "reinstalled", by sending an install application command down for the same app DM does not have a similar mechanism which causes some issues as (while inconsistent) devices do not always respect the configuration sent down, and will not begin downloading VPP applications. They can be seen in the configuration when checking under VPN & Device Management but they do not return on a status report, alternatively and app will "install" but will have a cloud symbol next to it requiring a download (which I believe would be impossible on supervised devices without apple accounts/have restricted apple accounts associated to them). These apps are also reported incorrectly, as they return a managed response while being inaccessible. Both of these issues are solved by removing and reinstall applications (occasionally). Is there any easier way to trigger a re-install or is this the only way to trigger this? The Version element that can be optionally sent down does not seem to work (or if it does, does so inconsistently). A device will very happily download the application initially with the version element present, though when we detect an updated external ID from the VPP program and send down an updated configuration devices behave unexpectedly. Some have ignored it, some have responded back that a download has begun (with no download taking place and the application clearly still being the initial installed version as can be see in the apps page) or it just works, but there is not consistency. I realize a new UpdateBehavior object has been added to possibly handle this, but it is only supported in iOS 26 and above and there are plenty of people who do not have phones that can upgrade that far. Are there alternative ways to enforce an application update other than uninstalling and reinstalling the application without the version (or will sending down a config without a version after one was originally pinned force it to update to latest?) Kind Regards

When using the SoftwareUpdateEnforcementSpecific to target an update to iPad OS 18.7.1, will the update be triggered to be downloaded immediately after the iPad has an active Internet connectivity? Or, if the SoftwareUpdateSettingsAutomaticActionsObject download string is set to AlwaysOff, will this mean that the update enforced will not start downloading automatically, but only when the user decides? I am trying to understand how these two can be combined together or if they work independently, as while trying to enforce a specific version, we need to eliminate the possibility to download an iPad OS version using cellular data, as our devices have an eSIM installed and the cost of using that for the iOS updates will be quite high. Maybe there is a setting to only allow the iOS updates to be downloaded via Wi-Fi. Thanks!

Hello together, I'm currently trying to implement a simple way to use the new LOM commands for our new mac infrastructure. My MDM sollution is a custom instance of MicroMDM. MDM profiles are working fine, but when I send a https://aninterestingwebsite.com/documentation/devicemanagement/lom_device_request_command with any command (Reset, PowerON, PowerOFF), then it doesn't reset/restart/start the target Mac. Host X has a device profile and host Y a controller profile. Host/Mac Y = fe80::YYYY:YYYY:YYYY:8608 Host/Mac X = fe80::XX:XXXX:XXXX:cfab Now, if I send a LOM request for Mac Y to reset Mac X, I get the error "Address already in use" on Mac X (logs via log stream) log stream (private logs) And wireshark on Mac X shows there is traffic, but MacX does not respond to anything, not even tcp syn packages. This error is really weird, because there are no special ports running on that mac and I don't know what Port lightsoutmanagementd tries to listen to. lsof | grep LISTEN | grep -i ipv6 launchd 1 root 7u IPv6 0x457f571ac3303fd7 0t0 TCP *:ssh (LISTEN) launchd 1 root 11u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) launchd 1 root 27u IPv6 0x457f571ac3303fd7 0t0 TCP *:ssh (LISTEN) lightsout 112 root 4u IPv6 0x457f571ac3302ad7 0t0 TCP *:55555 (LISTEN) kdc 143 root 5u IPv6 0x457f571ac33023d7 0t0 TCP *:kerberos (LISTEN) screensha 403 root fp.u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) (fileport=0x2103) screensha 403 root 3u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) ARDAgent 535 devops 9u IPv6 0x457f571ac33031d7 0t0 TCP *:net-assistant (LISTEN) Did anyone have the same problem, or maybe can hint me in the right direction? I currently don't have a clue, what I can do next.

Hello ! Currently, we have customers who use about 5,000 devices. In the case of ios26, the phone number is not acquired overall, and 18.x, 17.x, and 16.x are all acquired in half and not acquired in half. https://aninterestingwebsite.com/documentation/devicemanagement/deviceinformationcommand/command-data.dictionary/queries-data.dictionary It seems that it is the right behavior not to acquire it on the specification sheet. However, I wonder when it became impossible to acquire. (There are devices that can be acquired and devices that can't be acquired in the same os version.) Will the devices that are being acquired be blocked someday? When it was developed in 2019, it was in a state that could be acquired in full. I would also like to ask if there is an alternative way to get your phone number. Thank you.

Hi everyone, I’m working as an IT engineer in the cruise industry and need to troubleshoot passenger complaints about Apple’s new RCS messaging feature (introduced with iOS 18). Could someone help confirm which domains and ports iPhones use when they send RCS messages? My firewall team wants specifics: domains (or subdomains) that need whitelisting and the ports involved. Any official or community-sourced info would be super helpful—thanks in advance!

We are experiencing a lot of problems deploying an enterprise app for in-house use since late January. All our iPads are managed by an MDM solution. It can take 10 or more attempts to successfully deploy the app. The deployment usually fails with the message "ASDErrorDomain error 854" among other messages. The company providing the MDM solution has no idea what causes this message or what it means. I suspect the error message is not generated by the MDM solutiion but rather gets passed through from iOS. After many attempts the installation may succeed suddenly, though, and the apps works as expected, but this may take weeks. I have not done any changes to my development system. 'I am running XCode 15.3 with SDK version 17.4, the iPads are on iOS 18.3

Hello Apple Developer Community, I am implementing the "Return to Service" feature with app preservation in our MDM solution (iOS 26+). My goal is to use the EraseDeviceCommand to securely erase user data while preserving managed apps, and then have the device automatically re-enroll without user interaction. What I am doing: The device is supervised and successfully enrolled in Automated Device Enrollment (ADE). The device has generated and escrowed a bootstrap token to our MDM server (SetBootstrapToken received). I am sending the EraseDeviceCommand to the device via MDM with the necessary parameters for Return to Service with app preservation. The command payload includes: Enabled: true The previously escrowed BootstrapToken (as Base64 data). WiFiProfileData (as Base64 data) to ensure connectivity post-erase. Example Payload Structure (Simplified): <key>ReturnToService</key> <dict> <key>Enabled</key> <true/> <key>BootstrapToken</key> <data>YOUR_BASE64_TOKEN</data> <key>WiFiProfileData</key> <data>YOUR_BASE64_WIFI_PROFILE</data> </dict> The observed behavior: The erase command is successful. The device performs the secure user data erase. Crucially, the managed applications are preserved and automatically installed again after the reboot (confirming app preservation is working). The device connects to the Wi-Fi network successfully. The issue: I am not seeing the GetBootstrapToken request from the device hit our MDM server's check-in URL during the post-erase setup assistant phase. The re-enrollment seems to complete, but this specific request is missing from our server logs. My questions: Is the GetBootstrapToken request an explicit check-in message type, or is it an implicit part of the general CheckIn process during ADE re-enrollment when the token is used? If the device successfully re-enrolls and preserves apps, is the explicit GetBootstrapToken request still expected? Or does the token included in the EraseDeviceCommand payload satisfy all authentication needs for this workflow? What specific conditions or capabilities on the MDM server side might prevent the device from sending this specific request, even if the overall process succeeds? Any insights from Apple engineers or other developers who have successfully implemented this flow would be greatly appreciated. Thank you!

Details: Device: iPhone 12 Pro Max System: iOS 26.1 beta 2 Issue Description: When testing MDM device restriction capabilities on iOS 26.1 beta 2, I found that the allowCamera restriction does not work as expected. Observed Behavior: • On a BYOD device: When allowCamera is set to false, the Camera and FaceTime apps disappear from the Home Screen, as expected. However, third-party apps (such as WeChat) can still access the camera and take photos. • On earlier versions (e.g. iOS 26.0.1): Setting allowCamera to false correctly blocks all apps, including third-party apps, from accessing the camera. Initially, I assumed Apple might have changed this restriction behavior so that allowCamera only applies to supervised devices. However, after testing on supervised devices, I found that even there, when allowCamera is set to false, the Camera and FaceTime apps are hidden, but third-party apps can still use the camera. This indicates that the restriction is not functioning correctly in iOS 26.1 beta 2. Expectation: When allowCamera is set to false, all camera access — including third-party apps — should be blocked. Request: Could someone from Apple’s development or MDM team confirm whether this is an expected behavior change or a potential bug in iOS 26.1 beta 2?

For additional security we would like to avoid keeping generated certificates (their private keys) on our server after installing them on a device, but still be able to reference them in later installed configuration profiles via MDM. However, it seems that for a configuration profile's payload to use a certificate (e.g. VPN payload), the certificate payload must be present in the same profile. Are we missing anything, perhaps it's already possible somehow? Ideal workflow for us would be: our MDM server generates a certificate (private+public keys) for a given device our MDM server sends this certificate to the device as configuration profile and saves PayloadUUID of the certificate's payload our MDM server deletes the generated private key from its storage. At this point the private key is present only on the device. at some point in the future our MDM server sends a configuration profile that references the certificate from step 2 via the saved PayloadUUID (e.g. using key PayloadCertificateUUID in a VPN payload) Current result: device responds to MDM server with error "The profile “VPN” could not be installed. Certificates needed for the VPN service “VPN” are invalid." Desired result: device is able to find the previously installed certificate via its PayloadUUID. Alternatively, it could be certificate fingerprint or something similar. One more alternative could be to replace steps 1-3 by an app on the device that obtains a certificate (in any way), installs it to device as a configuration profile, passes the certificate's PayloadUUID to our MDM server and then doing step 4.

Hi team, We need to identify the domains used by macOS Software Update so they can be bypassed by our NETransparentProxy. The Apple support article below lists Software Update and several other Apple service domains. At the moment we’re unsure whether we should only bypass the Software Update and Beta Software domains, or whether we also need to bypass domains used for certificate validation, device management (Apple Business Manager / Apple School Manager / Apple Business Essentials), network provider updates, Apple Diagnostics, etc. We also need the specific IP ranges used exclusively by Software Update. The document shows Apple’s entire IP range; for IPv4 you can allow outbound connections to 17.0.0.0/8. https://support.apple.com/en-in/101555

Issue Using the DeviceInformationCommand API, the following device information can no longer be retrieved on iOS/iPadOS 26 and later. IMEI ICCID PhoneNumber This issue does not occur on devices running iOS/iPadOS 18.x or earlier. We would appreciate it if you could advise us on a solution to enable the retrieval of this information. Request XML <?xml version=\"1.0\" encoding=\"UTF-8\"?> <!DOCTYPE plist PUBLIC \"-//Apple//DTD PLIST 1.0//EN\" \"http://www.apple.com/DTDs/PropertyList-1.0.dtd\"> <plist version=\"1.0\"> <dict> <key>CommandUUID</key> <string><!-- Here is CommandUUID --></string> <key>Command</key> <dict> <key>RequestType</key> <string>DeviceInformation</string> <key>Queries</key> <array> <string>IMEI</string> <string>ICCID</string> <string>PhoneNumber</string> </array> </dict> </dict> </plist>

On iOS 26, if in "Single App Mode", the device gets stuck on the lock screen. Devices are configured in SAM (kiosk mode), without a PIN requirement. Since updating to iPadOS 26, every single device that locks (goes to sleep) becomes completely unresponsive at the lock screen. Touch input does not work. The only way to regain access is to reboot the device, which will boot to the SAM app, but then lock again if it goes to sleep. Related discussion in the public forums.

We are having issues working with bypass codes the server creates when initiating Activation Lock through MDM. We are able to use the device-generated bypass codes without issue. When using the end point to request activation lock as specified in https://aninterestingwebsite.com/documentation/devicemanagement/creating-and-using-bypass-codes/ we get a 200 response. But when using the endpoint to bypass the activation lock, we get a 404 response. If we try to manually input the activation lock bypass code, it also does not work. Both of these methods work with the device-generated bypass codes. Just to clarify when testing the server generated codes, we ensured that we did not test the device-generated codes. All of this was tested on iOS devices. Created feedback ticket FB21365819 with device specific details.

Hello, I've noticed some unexpected behavior when updating a user's FileVault password. The set up: All actions are performed in virtualized macOS 14 and 15.5 guests on a 15.5 Apple Silicon host. FileVault is enabled. sjsp is a standard user with a Secure Token. The Mac is bound to AD, and the domain is reachable. Reproduction: systemctl -secureTokenStatus sjsp shows it's ENABLED. fdesetup remove -user sjsp fdesetup add -usertoadd sjsp systemctl -secureTokenStatus sjsp shows it's DISABLED. Surprisingly, sjsp is still able to unlock FileVault. Looking at unified logs for opendirectoryd and fdesetup, I see that a password change is being attempted in response to fdesetup add, which is unexpected. default 13:34:41.320883+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) info 13:34:41.321317+0100 opendirectoryd No unlock record exists for E5CC46D7-0C1F-4009-8421-9AA8217CB784 info 13:34:41.321331+0100 opendirectoryd <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) is not a SecureToken user: no unlock record default 13:34:41.321341+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784): user <private> SecureToken, only new password provided, credential <private> default 13:34:41.321454+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) with no existing unlock record info 13:34:41.321857+0100 opendirectoryd No unlock record exists for E5CC46D7-0C1F-4009-8421-9AA8217CB784 default 13:34:41.321873+0100 opendirectoryd Record <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) is eligible for SecureToken default 13:34:41.322637+0100 fdesetup DMAPFS cryptoUserForMacOSUserForVolume DMErr=-69594 retErr=-69594 outAPFSCryptoUser=(null) default 13:34:41.322699+0100 opendirectoryd While changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784): Not adding SecureToken; other unlock records exist, but no existing unlock record provided If I disconnect the network and follow the reproduction steps then the Secure Token is retained. Reconnecting and waiting a while doesn't cause the Secure Token to be lost. There are no log entries about attempting to change the password. Any help or explanation would be appreciated, thanks in advance.

We are trying the renewal the apple Enterprise program. It asks set of questions after that it shows the below message "Thank you for your request to renew your membership in the Apple Developer Enterprise Program. We’ll review your submission and get back to you shortly to let you know if we can process the renewal or if another program better serves your organization’s needs." We have submitted for review for over two months now. During these two months, we have contacted the official customer service multiple times, only to be told to wait for news. Now, with only a few days left, The status hasn't changed, neither approved nor rejected，what should we do？This account is very important to our company. Thank you

We are implementing the Return to Service (RTS) with App Preservation flow. During testing, we were able to successfully fetch the Bootstrap Token as part of the ADE enrollment process. However, when attempting to initiate the Return to Service command with App Preservation enabled, the following error was returned: [ { "ErrorCode": 12089, "ErrorDomain": "MDMErrorDomain", "LocalizedDescription": "Could not erase device.", "USEnglishDescription": "Could not erase device." }, { "ErrorCode": 66002, "ErrorDomain": "MDMBootstrapTokenErrorDomain", "LocalizedDescription": "Failed to generate LAContext for bootstrap token", "USEnglishDescription": "Failed to generate LAContext for bootstrap token" } ] Below is the sample request (with dummy data). The actual request contained valid values in all fields: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>RequestType</key> <string>EraseDevice</string> <key>ReturnToService</key> <dict> <key>Enabled</key> <true /> <key>WiFiProfileData</key> <data>WiFiProfileData</data> <key>BootstrapToken</key> <data>BootstrapTokenValue</data> <key>MDMProfileData</key> <data>MDM Profile Data</data> </dict> </dict> <key>CommandUUID</key> <string>3670</string> </dict> </plist>