We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

Microsoft are retiring the “Azure AD Graph API”. We allow the use of Apple email apps in our M365 tenant via the “Apple Internet Accounts” Entra ID Enterprise Application, however this is using the “User.Read” permission from this retiring “Azure AD Graph API”. My concern is that Apple email app’s will stop working in our tenant when Microsoft retire the “Azure AD Graph API” and this permission is removed, as this is an Apple managed Enterprise Application, we have no method of changing the permissions ourselves. I have not been able to find any information on how the “Apple Internet Accounts” Entra ID Enterprise Application can be updated to use the required, newer “Microsoft Graph API” “User.Read” permission. It is not possible for us to change the permissions on the “Apple Internet Accounts” Entra ID Enterprise Application in our tenant, my assumption is that Apple would need to deploy a newer version of Email app that uses the newer “Microsoft Graph API” “User.Read” permission, and we would then need to consent the use of this new permission in our tenant. I would have thought Apple would have deploy this by now, but we have not seen any consent requests. Does anyone have any information about how Apple are handling this Microsoft change and how we can pre-emptively update the “Apple Internet Accounts” Entra ID Enterprise Application to ensure that Apple email client continue to work in our tenant? Many thanks.

Hi team, We need to identify the domains used by macOS Software Update so they can be bypassed by our NETransparentProxy. The Apple support article below lists Software Update and several other Apple service domains. At the moment we’re unsure whether we should only bypass the Software Update and Beta Software domains, or whether we also need to bypass domains used for certificate validation, device management (Apple Business Manager / Apple School Manager / Apple Business Essentials), network provider updates, Apple Diagnostics, etc. We also need the specific IP ranges used exclusively by Software Update. The document shows Apple’s entire IP range; for IPv4 you can allow outbound connections to 17.0.0.0/8. https://support.apple.com/en-in/101555

The question: Is there any chance that Apple will integrate Intune SDK into Apple apps such as Mail or Calendar, or create Siri-compatible Intune SDK-integrated versions of Mail and Calendar? The reason for the question: My team has been asked by VIPs in our company (e.g. execs and board members) if Siri can be used with Outlook, and the only way is through Shortcuts or by adding the Outlook account to Mail. Both of these options would violate our security policies for these reasons: Since our company policy and federal regulations don't permit us to allow access to company resources on non-MAM-protected apps, we can't allow our users to login to the Mail app and make full use of Siri, due to the lack of MAM controls for Mail and Calendar. We only allow users to transfer data between policy-managed apps which have integrated the Intune SDK allowing us to enforce DLP and other security measures. The only way to enable Shortcuts would be to disable these security measures.

I registered in this summer, uploaded 2 apps. But recently I decided to add iAP to my apps, everything is ready, in Xcode sandbox everything works fine, but when I uploaded new version to TestFlight to test, when I tap on the subscription it says something like "Product not found". (I have added subscriptions to the app, and added them to the version before submitting, also, this version is in status "awaiting developer release" so I can tap a button and this new version with iAPs will be on App Store. But im unsure what to do, because exactly this verified by Apple's version is not working in TestFlight.) In Business section of my Apple Developer Account in Agreements I only have agreement of free apps, but not about the paid apps. 
When I registered I used my (R)(us)sian passport, I think this is the reason that I simply don't even have the agreement of paid apps to accept it. 
I have multiple passports, and multiple EU debit cards. I emailed apple to change the location of my account (to another EU country), but they ghosted me. They sent me emails to upload documents about 4 or 5 times, every time I uploaded my another passport, got an auto email "thank you, we will write you in 2-3 days", but either they did not write me, or they said that the document is not in English (it isn't). 
What do I do? Also, to my situation, someone of my family has a company in (R)(us)sia, and I have in EU (Estonia). Maybe if nothing will work out with "Individual account", I should change to my company? And what is better EU or (R)(us)sian? 
Im new to this community, hope to hear an answer, or just an advice. Thank you!

Hey all, how long does bank account validation take typically? I have everything else in my paid agreement approved and showing active except the bank account. It says 24 hours but it has been over 3 days and there has been no progress.

The Center for Innovation in Education created a reading program designed to teach every single child to read, regardless of any supposed difficulty in learning. The Center conducted a ten-year study of its Reading Program’s effectiveness. Over those ten years, the Center placed 2,048 Reading Program kits in classrooms across America. More than 300,000 children took part in the Center’s study. Results: The Reading Program taught every single child to read in every single classroom, every single year, regardless of any child’s supposed reading readiness - including dyslexic, autistic, and even Down syndrome children. No failures then or in any of the many years that have followed. Despite the Program’s success, educational publishers refused to publish it. Their refusals will be explained and hopefully counteracted in a book that is scheduled to be published in 2026. In response to publishers’ refusal to make the program available, the Center made it available as a free download from its website. The Center also made its program available as 14 free iPad apps. While the apps can be searched for individually by their unique names, since the apps are interrelated and meant to complement one another, the first keyword assigned to all 14 apps was the same. That same keyword is still in its first position for every app. The first keyword listed for each of the 14 apps is the word “Dekodiphukan”. That meant-to-be hard-to-read search word has worked well every year since the apps were introduced. However, in June of this year, that search term could find only 1 of the 14 apps. We reported this problem to Apple Support on June 26th. It is now November, and the problem remains unresolved. The only response we receive each time we ask for an update on the resolution of this problem the answer every time is: Reported search issues of this type require extensive review by Apple to determine whether it is valid and to confirm the appropriate action. There is no other response. No update has ever been sent to us. There is no phone number I can find to call. It was suggested to me by someone I spoke with in a different department at Apple Developers that I post my problem on the Developer Forum, in hopes that someone here can provide a suggestion for a way around this problem. Parents and teachers wishing to use our Reading Program with their children should not have to enter 14 different names to access our Reading Program.

"If your app includes any links outside the app, or offers any in-app or other purchasing opportunities, make sure these are behind a parental gate" Super Awesome and Kidoz are proving with a parental gate on ad click and they also claim that all ads are manually approved (another criteria for ads in Kids apps). So these two are the only ad networks we can use moving forward. Or we can use ad networks like Admob as well? I dont intend not to be in Kids category - so leaving Kids category is not a choice.

I've account access level of developer. I want to create app specific password but go through the account but could not get any option to do so. Can somebody help me on this. Thanks in advance.

Hi, I developed a Platform Single Sign-On extension and a corresponding extension for my IdP, which is Keycloak based. The code for both projects are here: https://github.com/unioslo/keycloak-psso-extension and https://github.com/unioslo/weblogin-mac-sso-extension I realized that, when using the Secure Enclave as the AuthenticationMethod, and according to Apple's documentation, the Extension doesn’t obtain fresh ID Tokens when they expire if the refresh token is still valid. When using password as the Authentication Method, it fetches new ID tokens when they expire, without prompting the user for credentials, by using the refresh token. My suggestion is that the same behavior should be implemented for Secure Enclave keys. The thing here is that usually, on OIDC flows, the ID/Access tokens are short-lived. It would make sense for the extension to provide fresh ID tokens. It doesn’t seem to make sense for me that, when using passwords, the extension would fetch these tokens, and not when having the Secure Enclave key. By not doing this, Apple almost forces the developer of an extension to fetch new ID tokens themselves, which doens’t make sense when it clearly provides fresh tokens when using passwords. It almost forces the developers to either implement that logic themselves, or to issue longer tokens, which is not so nice. How so you deal with this? Do you simply use the refresh token as an authentication token, or do you do some sort of manual refresh on the extension?

Hi, We developed a Platform SSO extension for our IdP, Keycloak. It would be great to get some feedback on it: https://francisaugusto.com/2025/Platform_single_sign_on_diy/

We have been trying to figure out how to block Apple Private Relay in our enterprise so we can monitor and filter our employees traffic. We are able to block the Private Relay via this process: We used this article from Fortinet to achieve this: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-block-iCloud-Private-Relay-from-bypassing/ta-p/228629 This also appears to block the users ability to utilize Apple iCloud Drive Backups. They would like to allow that still. Is there a way to block iCloud Private Relay while still allowing iCloud Drive Backups to work? I am not finding a document listing the URL requirements for iCloud Drive Backups. We currently have this solution in place: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-iCloud-private-relay/ta-p/383703 Basically this solution is allowing all Apple URL/IPs to go through the firewall and not be filtered. They would like to scan the traffic through. When scanning is enabled the firewall blocks the iCloud Private Relay traffic as it is blocked as being a proxy. Any guidance is greatly appreciated.

Hey. If i have a new idea for apple how can i reach out for you?

The profile expiration date is approaching, and no amount of inquiries will solve it. Create a new profile Download a new profile from Xcode Press archive, press Distribute App, press Enterprise, and distribute Invalid expiration date in profile of summary of review app.ipa content I've tried everything that comes out by Googleing profiles, such as regenerating profiles, erasing caches, updating Xcode, updating macOS, deleting existing profile information, etc. Expiration date different from the expiration date of the profile created in that menu is displayed. The expiration date of the profile I created is December 8, 2026, and the previous certificate is January 22, 2026. However, the profile information of the generated ipa is February 12, 2026. So I can't distribute this app because I'm scared, and the expiration date is coming up. Users should have a period of time to update. Get me a novice developer who's choking up.

Apple provides a function to create TTS voice as a file in TTS. (AVSpeechUtterance/AVSpeechSynthesizer) Or, if the user records the video of TTS playback and uses that video I wonder what the scope of use is if I use this TTS voice to make YouTube, TikTok, or commercial videos. Is it impossible to use it commercially at all? Can I use it commercially with the source indicated? Can I use it commercially without a separate source indication? Is there a difference in commercial use license between Siri voices and regular TTS voices?

Hi Team, Could you please share how to change/extend the expiry date of the existing iOS Distribution (In-House) certificate? Since the membership renewal date is in March 2026 and the iOS distribution(In-House) certificate expiry date is in Feb 2026. We use to distribute the mobile apps using the product intunes (Company portal) and via direct download link. Please suggest since this certificate is used by multiple mobile apps by the users which can affect lot of iPhone users? Thank you in advance Deepak

Hey folks, I work as a software development consultant. We develop enterprise applications for our clients, and the apps we create are usually for internal use. We've ran into a bit of a conundrum with a client who doesn't have their own Apple Enterprise account, and neither do we as we don't meet the criteria, but they're wanting to distribute an application we've built for them via their own MDM software. We are not entirely sure how to provide them with a distribution ready .ipa file that isn't AdHoc and will be recognized as a secure app. We've looked into generating a Developer ID provisioning profile and accompanying cert, however we're running into a problem where the platform of our app (iOS) doesn't match the platform required by the Developer ID profile (macOS). I've also come across the idea of resigning an .ipa, but again, the client doesn't have a Apple Developer account and expects the working .ipa to be included in the service rendered. Any suggestions or advice or documentation around the subject would be greatly appreciated. Thanks, Ale

Hello everyone, I’m looking for some clarity from the community regarding eligibility for the Swift Student Challenge 2026, particularly for students taking a gap year in India. I graduated from high school (Class XII, CBSE – India) in May 2025. After graduating, I chose to take a gap year to prepare for competitive entrance examinations in India, with the goal of pursuing Computer Science / Engineering. I’ll be applying to accredited universities for programs starting in mid-2026, and I’m not currently enrolled in a college. My question: The eligibility guidelines state that high school graduates must have graduated within the past 6 months and must be awaiting acceptance or have received acceptance to an accredited institution. Since the submission deadline is February 28, 2026, my graduation would be about 9 months prior, which puts me in a gray area. Has anyone here participated in, or seen others participate in, the Swift Student Challenge while taking a gap year and preparing for university entrance exams? Is there any known flexibility or precedent for students in this situation? I’ve been following the Swift Student Challenge since 2023 and would really love to participate if I’m eligible. Any insights or experiences would be greatly appreciated. Thanks!

I have a question regarding MDM functionality for iOS/iPadOS. Background: According to Apple's support page(https://support.apple.com/en-us/125073), since iOS 26.1, "Previous Wi-Fi configurations will be replaced when a new profile is installed." We have observed that because of this change, when we apply a Wi-Fi configuration profile to an iPad via MDM, the manually configured network settings on the device (specifically, "Configure IPv4" and "Configure DNS") are reset to "Automatic". This erases the manually entered IP address, subnet mask, router, and DNS server addresses. Goal: We want to apply a Wi-Fi configuration profile from our MDM server to connect the device to a specific SSID, while preserving the manual IP and DNS settings that have been configured on the device. Question: Is there a way to prevent the IPv4 and DNS settings from being switched from "Manual" to "Automatic" when applying the configuration profile? For example, is there a specific key-value pair we can add to the profile to either preserve the existing manual settings, or to explicitly define manual/static IP settings within the profile itself for iOS/iPadOS? Reference: Sample Configuration Profile Below is a simplified version of the Wi-Fi configuration profile we are currently using. This profile does not contain any keys for IP address configuration. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>PayloadType</key> <string>com.apple.wifi.managed</string> <key>PayloadIdentifier</key> <string>com.apple.wifi.managed.13E2E6B3-D4B9-4E23-888A-524B3ED40C38</string> <key>PayloadUUID</key> <string>13E2E6B3-D4B9-4E23-888A-524B3ED40C38</string> <key>PayloadVersion</key> <integer>1</integer> <key>SSID_STR</key> <string>SSID</string> <key>EncryptionType</key> <string>WPA</string> <key>Password</key> <string>Password</string> </dict> </array> <key>PayloadType</key> <string>Configuration</string> </dict> </plist>

Hello Apple Developer Community, I'm experiencing an invalid_client error (HTTP 400) when attempting to authenticate with the Apple School Manager API using OAuth2 with JWT bearer assertion (RFC 7523). Despite verifying all configuration values and following Apple's documentation, I continue to receive this error. Error Details Error: invalid_client HTTP Status: 400 Bad Request Endpoint: https://appleid.apple.com/auth/oauth2/v2/token Response: {"error": "invalid_client"} My Configuration All values have been verified to match Apple School Manager exactly: Organization ID: 55155430 Key ID: 8136a1f6-c995-4010-b964-bc8278c107ef Client ID (Service ID): SCHOOLAPI.7c0c10a0-4d8a-4ef8-a2be-eda040b65c59 Private Key: Loads correctly, signs JWT properly (ES256) JWT Configuration I'm generating a JWT with the following structure: Header: { "alg": "ES256", "kid": "8136a1f6-c995-4010-b964-bc8278c107ef", "typ": "JWT" } Payload: { "iss": "55155430", "sub": "SCHOOLAPI.7c0c10a0-4d8a-4ef8-a2be-eda040b65c59", "aud": "https://appleid.apple.com", "iat": [timestamp], "exp": [timestamp + 30 days] } Token Request Method: POST Content-Type: application/x-www-form-urlencoded Parameters: grant_type: client_credentials client_assertion_type: urn:ietf:params:oauth:client-assertion-type:jwt-bearer client_assertion: [JWT token] scope: https://api.apple.com/auth/schoolmanager What I've Verified ✅ All configuration values match Apple School Manager exactly ✅ Private key file exists and loads correctly ✅ JWT is generated with correct structure (ES256, proper claims) ✅ Key ID in JWT header matches the Key ID from Apple School Manager ✅ Request format matches OAuth2 RFC 7523 specification ✅ Content-Type header is application/x-www-form-urlencoded ✅ Tried both Client ID and Organization ID as sub claim (both fail with same error) ✅ DNS resolution and API connectivity are working ✅ API account appears active in Apple School Manager interface What I've Tried Using Client ID as sub: Tried using SCHOOLAPI.7c0c10a0-4d8a-4ef8-a2be-eda040b65c59 as the sub claim Using Organization ID as sub: Tried using 55155430 as the sub claim (fallback) With and without scope: Tried both including and excluding the scope parameter Different JWT expiration: Tried various expiration times (30 days, 180 days) Verified Service ID format: Confirmed the Client ID follows the SCHOOLAPI.xxxxx-xxxxx-xxxxx format Both attempts (Client ID and Organization ID as sub) return the same invalid_client error. Previous Support Interaction I've contacted Apple Developer Support (Case #102783504559). They confirmed: The technical implementation is correct The issue is an account access/permission problem My Apple Account email is not associated with any memberships The Account Holder must add me to the Enterprise team membership However, I'm posting here to see if anyone in the community has: Experienced similar issues and found a solution Additional technical insights about the invalid_client error Suggestions for what else to verify or try Questions Is there a specific format requirement for the sub claim? Should it be the Client ID (Service ID) or Organization ID? I've tried both. Are there any additional claims required in the JWT beyond iss, sub, aud, iat, exp? Could there be a backend issue with the API account even though it appears active in Apple School Manager? Has anyone successfully resolved an invalid_client error that wasn't related to account access? Is there a delay after creating an API account before it becomes fully active for authentication? Technical Details Language: Python (Flask) JWT Library: PyJWT with cryptography library Algorithm: ES256 (ECDSA P-256) OAuth2 Flow: Client Credentials Grant with JWT Bearer Assertion (RFC 7523) Error Log I've generated a detailed error log showing the exact request/response. The key points: HTTP 400 Bad Request Response: {"error":"invalid_client"} Same error occurs with both Client ID and Organization ID as sub Any Help Appreciated If anyone has encountered this issue or has insights into what might be causing it, I'd greatly appreciate your help. I'm happy to provide additional details or try any suggestions. Thank you! Case Number: 102783504559 API Account: Created in Apple School Manager Status: API account appears active, but authentication fails