Here are some questions we received and answers: Q1: Is there a limit to the number of alarms that can be scheduled using AlarmKit? There is no set number as a limit, but this does not mean you can schedule a limitless number of alarms. Depending on device state, available resources, etc., the device may impose a limit, and restrict an app trying to schedule too many alarms simultaneously. When you hit a limit and not able to schedule more alarms, you will receive the maximumLimitReached error. Q2: Will the scheduled alarms persist after system or app events that may terminate an app, for example, a reboot, force quit, or app crash? Yes, all alarms are expected to persist regardless of app or device state changes, once they are successfully scheduled. Q3: Will alarms work if scheduled by an app that is hidden, or requires a passcode or Touch ID/Face ID to launch? Hidden or passcode required apps do not work with AlarmKit. Currently, any scheduled alarms by such apps will silently fail. Q4: When an alarm is dismissed (either by swiping or pressing the power button), can an app detect this action and execute code in response? What about force closed apps? When an alarm is dismissed, the stopIntent set in the AlarmConfiguration is called. Any code in the perform method of this AppIntent would execute. Q5: Is there a focus mode that AlarmKit cannot break through? No. AlarmKit alarms can break through all focus modes. Q6: What is the expected behavior when alarms from multiple apps overlap? Which one gets priority? Which alarm would get activated when multiple alarms are scheduled for the same time is non-deterministic. There is no way to guarantee which app or which alarm will "win". Q7: What do pressing the physical buttons do when an AlarmKit alarm is active? Any physical button that causes a reaction from AlarmKit will stop the currently alerting alarm. Q8: If there are multiple alarms active at one time, which ones do physical buttons interact with? Pressing a physical button will dismiss all currently alerting alarms Argun Tekant /  DTS Engineer / Core Technologies Change History: 2025-08-15: First posted

We are developing a walkie-talkie style iOS app using CallKit and PushKit for real-time voice communication. The app is intended for internal company use and requires unrestricted VoIP push capabilities to reliably deliver incoming call alerts, even in background or locked states. Our app's use case follows Apple’s guidelines, and we are not using PushKit for messaging or background data. We have already enabled "Push Notifications" in Capabilities and confirmed the provisioning profile, but are unable to enable com.apple.developer.pushkit.unrestricted-voip. Could someone from Apple or the community advise on the current process to request this entitlement for a production app? Developer Team ID: 3KX7Q4LX88 App Bundle ID: com.ksc-sys.rcc.TakumiTalk Developer Name: KOHEI TAKAOKA Company: R C C, Y.K

We are currently developing a WebAPI service that uses APNs (HTTP/2) to send push notifications to iOS devices. (Using PushSharp's HTTP/2 support) The WebAPI service is running on IIS using .net framework 4.8 and c#. The connection to APNs is always maintained, and the connection is checked every 30 minutes using a dummy token Ping. KeepAlivePeriod = 30 minutes and KeepAliveRetryPeriod = 10 seconds have also been set. However, the following issues are occurring. Although the Ping sent immediately before was successful, a TimeoutException occurs in the notification request sent a few minutes later. There is no explicit disconnection notification from APNs, and the connection appears to be silently disconnected. Once a TimeoutException occurs, it occurs frequently afterwards. Below is an excerpt from the log. Apple Notification Failed for some unknown reason 1-1: One or more errors occurred. Apple Notification Failed for some unknown reason 1-2:System.TimeoutException: The operation timed out. In light of this issue, I would like to be advised on the following two points. Are there any official specifications regarding the lifecycle and expiration date of APNs HTTP/2 connections? Even if pings are sent periodically, is there a timeout or other setting that disables the connection on the APNs side? What are the conditions that would cause APNs to silently terminate a connection? For example, could this be due to inactivity, TLS restrictions, network maintenance, etc.? If you have any official documentation or technical guidelines to improve the reliability of this system, we would appreciate it if you could share them with us. Thank you in advance.

Hi Apple Support team, I would like to inform you that we were receiving push notifications to all regions. Recently we were facing push notifications are not receiving to brazil region. For all other regions we are receiving. We are using same APSN certificate. Any region specific permissions do we need to add. Please let me know. Thanks.

Hi there, Thank you for the framework 🙏 if I use Alarm.Schedule.Relative with Alarm.Schedule.Relative.Time(hour: hour, minute: minute) and Alarm.Schedule.Relative.Recurrence.never it seems like there is some (odd?) limit where alarm will get scheduled to next day if too close? For example, lets say the current time is 12:00 PM, if I schedule alarm for 12:02 PM, it will schedule it for next day, while if I do 12:05 PM it will work as expected. Is that expected? If yes, what's the behavior and is that documented anywhere? I would expect any alarm thats scheduled in the future to fire for the current day (maybe if it's only 1 minute it gets tricky). One problem is also that even if the framework says an alarm is scheduled, I don't have access to the "next alarm date"? I wish I did as otherwise I have to compute it (by "guessing" the AlarmKit calculation) if I want to do anything with that date. Honestly, sometimes I think I am just going crazy when the alarm doesn't fire, but there SEEMS to be some odd behavior around this? (of course, feel free to correct me on anything - I could be missing documentation or not understanding something)

I am unable to connect to APNs sandbox push endpoint from our backend servers. It works fine when hitting the request from my local machine but it fails from the infra servers. Here are the complete curl details. Endpoint: https://api.sandbox.push.apple.com:443 CURL request and response: curl -v https://api.sandbox.push.apple.com:443 Trying 17.188.168.149:443... Connected to api.sandbox.push.apple.com (17.188.168.149) port 443 ALPN: curl offers h2,http/1.1 Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH TLSv1.2 (OUT), TLS handshake, Client hello (1): CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 Closing connection curl: (35) OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 There are no issues with Production endpoint. Can someone help? Verified all certificates. Everything worked fine until 29th July but started failing since 30th July

Hello Apple Support Team, We are using auto-renew plans in our app We have set the webhook URL in our App Store Connect account to get the Store server notification to get the auto renew data for an user The issue is when a user purchases any auto-renew plan at the auto-renew time, we are getting null data from the Apple side. We have printed the log's data to check what data are coming from the Apple webhook. we have attached our logs data please check it and let me know what can we do to resolve this

Hello, I am trying to utilize the Critical Messaging API to allow my user to message 1 or multiple pre registered contacts automatically. An issue I am having with this in testing is that when the application attempts to fire off texts to the phone numbers the success rate changes from trial to trial, with no variable changing. Sometimes I can send a Critical Message to multiple phone numbers in rapid succession, sometimes the message is only sent to 1 contact, and sometimes I get no successes. Each failure always returns the MSCriticalMessaging.notSupported error. The API documentation states, "The send(_:to:) method only works if the app is backgrounded, if it’s called from foreground the framework returns a MSCriticalMessagingError.notSupported error." If my app is always backgrounded in these tests, what other issues may cause this notSupported error return, and why does the outcomes success rate vary?

I've added a Notification Service Extension as a target to my React Native iOS app following Apple's official documentation. After completing all the setup steps as outlined in the documentation, the notification titles remain unchanged - notifications are arriving without any modifications, suggesting the extension isn't functioning properly.Testing Details: Sending notifications via Apple Push Notification Console Tested on iPhone 16 Pro Max (physical device) Tested on iPhone 15 Pro simulator Both show the same issue - no title modifications The extension appears to not be executing at all. Has anyone encountered similar issues with Notification Service Extensions in React Native projects, or can suggest troubleshooting steps to verify the extension is properly configured and running?

Is there a way to configure the APNS notification sound volume to be louder? I am implementing some custom sounds(narrative sentences) for APNS, it does play the custom sound, but the volume of the custom sound is not loud enough even though I had set the device's volume and "RingTone and Alerts" volume to max. I tried to amplify the custom sound file, it does play louder but the result is minimum if I want to maintain the quality of the sound without it been distorted. I tried to use Notification Service Extension, AVAudioPlayer and AVAudioSession to play the sound, it does play louder in max volume compare with relying on default sound payload in APNS, but the problem is AVAudioPlayer and AVAudioSession do not seems to be usable when the application is in background or killed state, is there any other alternative I could use?

I am unable to connect to APNs sandbox push endpoint from our backend servers. It works fine when hitting the request from my local machine but it fails from the infra servers. Here are the complete curl details. Endpoint: https://api.sandbox.push.apple.com:443 CURL request and response: curl -v https://api.sandbox.push.apple.com:443 Trying 17.188.168.149:443... Connected to api.sandbox.push.apple.com (17.188.168.149) port 443 ALPN: curl offers h2,http/1.1 Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH TLSv1.2 (OUT), TLS handshake, Client hello (1): CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 Closing connection curl: (35) OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 There are no issues with Production endpoint. Can someone help? Verified all certificates. Everything worked fine until 29th July but started failing since 30th July Here is the PCAP file. Additionally, Here is the outbound public IP : 3.251.214.255 apple_push_sandbox_pcap.txt

I’m using iOS 26 beta 9 on my iPhone 15 Plus. When I receive a call from a contact with multiple phone numbers, the call history does not clearly show which specific number was used to call me. Why? How to fix this issue?

How do i add the red bubble badge notification on the app for unread in app messages

I'm trying to provide custom localized descriptions for the iOS notification permission popup in my app, which supports multiple locales. To achieve this, I'm using InfoPlist.strings files per locale with the following keys: NSUserNotificationsUsageDescription NSUserTrackingUsageDescription The issue I'm facing is that NSUserTrackingUsageDescription is working correctly across all tested locales, but NSUserNotificationsUsageDescription only works for some locales. Locales tested: Working: ja, tr, fr-CA Not working: fr-BE, nl-BE In each case, the correct localized NSUserTrackingUsageDescription appears, but the NSUserNotificationsUsageDescription falls back to the default or does not appear as expected in fr-BE and nl-BE. I'm using Xcode 16 and testing on both iOS 18 simulator and physical devices, and the issue is consistent across both. Any insights on whether this is a known issue in iOS or if there are additional steps needed for NSUserNotificationsUsageDescription to localize properly would be greatly appreciated.

If there is a Notification Service Extension which has the com.apple.developer.usernotifications.filtering entitlement, then does/how having that entitlement affect the preconditions for the NSE to be delivered a push? Specifically, if the app has not prompted for requestAuthorization() is it expected that the push will be delivered to the NSE or not? Thank you

I trying to validate the certificate I created for APNS using the following command but I get an error. openssl s_client -connect gateway.push.apple.com:2195 -cert temp.pem -debug -showcerts Error: getaddrinfo: nodename nor servname provided, or not known connect:errno=0 Any help will be greatly appreciated.

If a notification: ONE_TIME_CHARGE is used to ship the IAP content, it involves a point where the client might not finish the transaction, yet the item is shipped. Will an unfinished purchase affect refunds?

In the new update of macOS 26 Tahoe, I have noticed that on my MacBook Air M3, I am not getting a warning when my battery is low or when it's about to go to sleep. My MacBook is just turning off without warning.

In iOS 26, I can check the notification that arrives to the user when the AirPods or Apple Watch is fully charged. When tap the notification, notification only expands and does not include actions such as moving to an app. I checked the documents of UserNotification and UNNotificationServiceExtension, but I couldn't find what I wanted. I can expand by long-tapping as default, but I'm looking for a way to expand it without entering the app when I tap the notification. I wonder if there is an API that I missed or if it's not publicly supported. thank you for your support.

Dear Apple Developer Support, I am currently developing an iOS application that uses push notifications with custom .caf audio and a Notification Service Extension. I have implemented the extension to download and play a dynamic sound file from a remote sound_url. It works well when the app is in the foreground or background. However, when the app is force-closed (swiped up from multitasking), the Notification Service Extension does not seem to run. As a result, the custom sound is not downloaded or played. I would like to confirm: Is it possible to trigger the Notification Service Extension when the app is killed? If not, what is the correct way to play a custom .caf sound when the app is terminated? Should I preload and save the .caf file in App Group storage and reference it by name in the sound field? Are there any best practices or limitations regarding push notification customization when the app is killed? I appreciate your help in clarifying this issue. Thank you very much! Best regards, Phan Van Tung