We're trying to add simple notifications to our CarPlay integration that should open certain template when pressed, but the issue is that when pressing this notification on CarPlay screen nothing is invoked in the code (presumably didReceive should be invoked). All works fine with the same notification but pressed on the iPhone screen - didReceive is invoked properly. How should I handle the action when push notification is pressed on CarPlay screen?

My iPhone VoIP app, which I'm developing, uses Apple Push Notification service (APNs). I have a question regarding the following statement found in "[Overview of app transfer > Apps using push notifications]" Overview of app transfer You must manually reestablish push notification services if transferring an app that uses the Apple Push Notifications service (APNs). The recipient must create a new client SSL certificate using their developer account, as associated client SSL certificates, TLS certificates, and authentication tokens aren’t transferred. Question Let's say the recipient of the app transfer creates a "new SSL certificates, TLS certificates, and authentication tokens." Afterward, we need to verify that the Apple Push Notification service (APNs) works correctly when combining the transferred app with this "new SSL certificates, TLS certificates, and authentication tokens." However, until the recipient finishes verifying that it works correctly, the transferor want to keep the app available for download as before and be able to use the Apple Push Notification service. Is this possible? More specifically, can the recipient test the app to be transferred on TestFlight "before the transfer is completed"? I want to combine it with the "new SSL certificates, TLS certificates, and authentication tokens." and test it on TestFlight. Reading "[Initiate an app transfer]," it mentions the existence of a "Pending App Transfer" status. During this "Pending App Transfer" status, can the recipient test the app on TestFlight? Initiate an app transfer After you initiate the transfer, the app stays in its previous status, with the Pending App Transfer status added, until the recipient accepts it or the transfer expires after 60 days. Also, if there are any documents describing these procedures, I would appreciate it if you could share them. Thank you very much.

Hi Team, We’re following up on our request for the Critical Alert entitlement for our app, which we plan to use to notify users about critical states of their devices. It’s been almost 4 weeks since we submitted the request, and we wanted to check on the typical review timeline so we can plan our upcoming work accordingly. If there’s anything we can provide or clarify to help complete the review or make the process easier, we’d be happy to assist. or the right forum to reach out to.

In macOS, how can I use UnmutableNotificationContent notifications to prevent the main window from activating when clicking the notification? code： import Cocoa import UserNotifications // Mandatory import for notification functionality class ViewController: NSViewController { override func viewDidLoad() { super.viewDidLoad() // Automatically request permissions and send a test notification when the view loads sendLocalNotification() } /// Core method to send a local notification func sendLocalNotification() { let notificationCenter = UNUserNotificationCenter.current() // 1. Request notification permissions (Mandatory step; user approval required) notificationCenter.requestAuthorization(options: [.alert, .sound, .badge]) { [weak self] isGranted, error in guard let self = self else { return } // Handle permission request errors if let error = error { print("Permission request failed: \(error.localizedDescription)") return } // Exit if user denies permission if !isGranted { print("User denied notification permissions; cannot send notifications") return } // 2. Construct notification content using UNMutableNotificationContent let notificationContent = UNMutableNotificationContent() notificationContent.title = "Swift Notification Test" // Notification title notificationContent.subtitle = "macOS Local Notification" // Optional subtitle notificationContent.body = "This is a notification created with UNMutableNotificationContent" // Main content notificationContent.sound = .default // Optional notification sound (set to nil for no sound) notificationContent.badge = 1 // Optional app icon badge (set to nil for no badge) // 3. Set trigger condition (here: "trigger after 3 seconds"; can also use time/calendar triggers) let notificationTrigger = UNTimeIntervalNotificationTrigger( timeInterval: 3, // Delay in seconds repeats: false // Whether to repeat (false = one-time only) ) // 4. Create a notification request (requires a unique ID for later cancellation if needed) let notificationRequest = UNNotificationRequest( identifier: "SwiftMacNotification_001", // Unique identifier content: notificationContent, trigger: notificationTrigger ) // 5. Add the request to the notification center and wait for triggering notificationCenter.add(notificationRequest) { error in if let error = error { print("Notification delivery failed: \(error.localizedDescription)") } else { print("Notification added to queue; will trigger in 3 seconds") } } } } }

When sending a single push notification to iOS 18 devices users receive the same notification multiple times. This issue appears specific to iOS 18 and was not observed in previous iOS versions Our server logs confirm each notification is sent only once. Notification payloads include proper apns-id values for identification and no network issues detected on our side

In the new update of macOS 26 Tahoe, I have noticed that on my MacBook Air M3, I am not getting a warning when my battery is low or when it's about to go to sleep. My MacBook is just turning off without warning.

When performing the P12 certificate sending test, there was an error stating that authentication failed due to the remote party closing the transport stream. May I ask how to solve this?

Hi all, May I please ask for an official clarification or documentation reference from Apple regarding this scenario: Is it possible for an iOS app to automatically launch or open a specific screen when a push notification is received — while the app is in the background or terminated (killed) state? I understand that for most cases, user interaction (such as tapping the notification) is required before the app can show UI. However, I’d like to confirm whether this is also true for time-sensitive or critical alert notifications, including emergency use cases (e.g. public safety alerts). Specifically: Can a critical alert notification directly launch the app or present a view controller? Or is user interaction always required before the app can present any UI, even with the critical alert entitlement? I would appreciate if anyone — especially Apple staff or engineers — could share an official Apple document or statement that confirms this behavior. Thank you very much! (Use case context: I’m developing an emergency broadcast feature for a property management / tenant app.)

I dont want my server to be spammed. Currently I am only in payment-related notifs (eg: user successfully renewed his subscription, user didnt successfully renew his subscriptions, ..) Where can I set that?

Hi everyone, I'm developing a custom Apple Wallet pass using a Django backend and exposing my local server through ngrok during development. For the first ~30 minutes, everything works exactly as expected: the pass registers correctly, silent push notifications trigger instant updates, Wallet immediately performs the GET request to fetch the new .pkpass, and the changeMessage displays almost instantly on the lock screen. At some point, however, the pass stops updating entirely. Apple APNs continues to return 200 OK for every silent push I send, but the device never performs the required GET /v1/passes// call to download the updated pass. As a result, even the internal content of the pass (ex: points/balance fields) no longer updates, which confirms that Wallet is not fetching the new .pkpass at all. No changeMessage appears either. This behavior has been described informally by other developers as Apple Wallet Pass Update Throttling, where the Wallet daemon begins ignoring silent pushes after repeated updates or certain internal conditions. I’m trying to confirm whether this is indeed throttling, what triggers it, and how to avoid it during development.

Currently working on a dating app which needs voip for audio and video calls for ios. the voip notifications only comes to the app in active and inactive mode but doesnt wake the device in background or terminated mode. After debugging i noticed that com.apple.developer.voip entitlement wasnt included which i later added, trying to create a build i get the eas error that the entitlement wasnt added to the identifier capabilities. My issue now is that i can't seem to find the voip capability to check in the identifiers capabilities list for the bundle id.d

I wanted to know if Apple ever supported displaying a red dot on notificationswith no indication number.

Hello! We've had reports of iOS devices 'waking up' and vibrating in response to the push notifications arriving but the notification itself is not being displayed to the user, despite having been granted the correct permissions. Is this a known issue?

If there is a Notification Service Extension which has the com.apple.developer.usernotifications.filtering entitlement, then does/how having that entitlement affect the preconditions for the NSE to be delivered a push? Specifically, if the app has not prompted for requestAuthorization() is it expected that the push will be delivered to the NSE or not? Thank you

Hello! When setting an alarm in an AlarmKit app, the alarm will not fire properly/reliably (the alert presentation is not shown) while the device has an app foregrounded in the landscape orientation. This behaviour has been present since the betas, however until the first party Reminders app showed the behaviour in the iOS 26.2 beta I suspected the issue was in my own code. The behaviour is exhibited when scheduling alarms in several AlarmKit apps: The Reminders app The AlarmKit WWDC Demo Project My own AlarmKit app However alarms scheduled by the stock Clock app do not seem to exhibit the behaviour. Minimal repro with first party app: Be using iOS 26.2 beta Open Reminders app Create an urgent reminder for a time in the not too distant future Open Mail.app Change to landscape orientation Wait for the fire time Observe the phone vibrates at the correct time but no alarm is fired Drag the notifications pane down, observe the LiveActivity has been started Change to portrait orientation Observe alarm fires I have noticed this behaviour from the AlarmKit apps mentioned while foregrounding other apps besides Mail, both first and third party: Photos YouTube Netflix The behaviour does not seem to occur when the foregrounded app is restricted to portrait mode, no matter the actual orientation of the device. In the case of my own app I have tried a multitude of ideas to get it to work reliably, getting alarms to fire in landscape is very intermittent at best and most often works after a fresh reboot. I've submitted a Feedback for the Reminders app: FB20956492. Any advice or suggestions would be appreciated!

When the app kills the process. Received APNs push message. Push messages carry voice related information. At the same time as receiving the push, obtain the voice playback of this voice message. How to achieve it?

Hi, we've observed a weird behavior for a small amount of our user that we keep receiving the same token from APNs despite it's shown as Unregistered. When we try to send push to the token, we got an Unregistered error so we remove that token from our server. However, later we would receive an add token request from the client with the same token we just removed, and when we try to send to the token it returns Unregistered again so we remove the token again. This happened 3 times for a user in an hour. The identifierForVendor remains the same for all the requests. We also owns the client and I've checked client code that it's sending the token it received from didRegisterForRemoteNotificationsWithDeviceToken to the server.

UNNotificationAttachment convenience init method seems to be checking for supported file types based on the extension of the file URL provided as a constructor parameter. This seems to be sub-optimal at best and incorrect at worst. Is this is a known issue for which a bug already exists?

My app(The Smart Life app) is unable to receive push notifications. Please confirm whether APNs has received push notifications from Alibaba Cloud and whether APNs has successfully pushed notifications to the Smart Life app.The Smart Life app uses Alibaba Cloud's push notification service. The message ID pushed by Alibaba Cloud is: f7a02288-a995-47ed-b417-837461028f03 Current Symptom: Alibaba Cloud has reported that this message has been successfully pushed to APNs, but the smart life app has not received any push notifications. The feedback log from Alibaba Cloud shows that the APNs push was successful, but the smart life app did not receive any push. Because APNs do not have message receipts and Alibaba Cloud cannot obtain notification delivery status, it is recommended that I use the APNs channel message ID to submit a work order to Apple technical support for investigation. Note: All push notification permissions for the Smart Life app are enabled, and the Smart Life app is in the foreground when push notifications are sent.

We are encountering the following issue with our VoIP application for iPhone, published on the App Store, and would appreciate your guidance on possible countermeasures. The VoIP application (callee side) utilizes a Wi-Fi network. The sequence leading to the issue is as follows: VoIP App (callee): Launches iPhone (callee): Locks (e.g., by short-pressing the power button) VoIP App (callee): Transitions to a suspended state VoIP App (caller): Initiates a VoIP call VoIP App (callee): Receives a local push notification VoIP App (callee): Answers the incoming call VoIP App (callee): Executes performAnswerCallAction() After this, the VoIP App (callee) uses "NSTimer scheduledTimerWithTimeInterval" to manage internal processing timing. However, the processing sometimes takes longer than the specified waiting time. Specifically, delays of several seconds can occur. We understood that if the user is interacting with the screen and both the iPhone and the VoIP app are in an active state, the VoIP app's processing would not be delayed. However, can significant delays (several seconds) in application processing still occur even when the iPhone is in an active state (i.e., the user is interacting with the screen)?"