I am developing a program on my chip and attempting to establish a connection with the WiFi Aware demo app launched by iOS 26. Currently, I am encountering an issue during the pairing phase. If I am the subscriber of the service and successfully complete the follow-up frame exchange of pairing bootstrapping, I see the PIN code displayed by iOS. Question 1: How should I use this PIN code? Question 2: Subsequently, I need to negotiate keys with iOS through PASN. What should I use as the password for the PASN SAE process? If I am the subscriber of the service and successfully complete the follow-up frame exchange of pairing bootstrapping, I should display the PIN code. Question 3: How do I generate this PIN code? Question 4: Subsequently, I need to negotiate keys with iOS through PASN. What should I use as the password for the PASN SAE process?

I'm trying to use ThreadNetwork API to manage TheradNetworks on device (following this documentation: https://aninterestingwebsite.com/documentation/threadnetwork/), but while some functions on THClient work (such as getPreferedNetwork), most don't (storeCredentials, retrieveAllCredentials). When calling these functions I get the following warning/error: Client: -[THClient getConnectionEntitlementValidity]_block_invoke - Error: -[THClient storeCredentialsForBorderAgent:activeOperationalDataSet:completion:]_block_invoke:701: - Error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process." UserInfo={NSDebugDescription=The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process.} Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process." UserInfo={NSDebugDescription=The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process.} Failed to store Thread credentials: Couldn’t communicate with a helper application. STEPS TO REPRODUCE Create new project Add Thread Network capability via Xcode UI (com.apple.developer.networking.manage-thread-network-credentials) Trigger storeCredentials let extendedMacData = "9483C451DC3E".hexadecimal let tlvHex = "0e080000000000010000000300001035060004001fffe002083c66f0dc9ef53f1c0708fdb360c72874da9905104094dce45388fd3d3426e992cbf0697b030d474c2d5332302d6e65773030310102250b04106c9f919a4da9b213764fc83f849381080c0402a0f7f8".hexadecimal // Initialize the THClient let thClient = THClient() // Store the credentials await thClient.storeCredentials(forBorderAgent: extendedMacData!, activeOperationalDataSet: tlvHex!) { error in if let error = error { print(error) print("Failed to store Thread credentials: \(error.localizedDescription)") } else { print("Successfully stored Thread credentials") } } NOTES: I tried with first calling getPreferedNetwork to initiate network permission dialog Tried adding meshcop to bojur services Tried with different release and debug build configurations

Hi Team, I have a Network Extension application and UI frontend for it. The UI frontend talks to the Network Extension using XPC, as provided by NEMachServiceName. On M2 machine, The application and XPC connection works fine on clean installation. But, when the application is upgraded, the XPC connection keeps failing. Upgrade steps: PreInstall script kills the running processes, both UI and Network Extension Let installation continue PostInstall script to launch the application after installation complete. Following code is successful to the point of resume from UI application NSXPCInterface *exportedInterface = [NSXPCInterface interfaceWithProtocol:@protocol(IPCUIObject)]; newConnection.exportedInterface = exportedInterface; newConnection.exportedObject = delegate; NSXPCInterface *remoteObjectInterface = [NSXPCInterface interfaceWithProtocol:@protocol(IPCExtObject)]; newConnection.remoteObjectInterface = remoteObjectInterface; self.currentConnection = newConnection; [newConnection resume]; But it fails to get the object id<IPCExtObject> providerProxy = [self.currentConnection remoteObjectProxyWithErrorHandler:^(NSError *registerError) { }]; Please note, this only fails for M2. For M1, this exact code is running fine. Additionally, if I uninstall the application by dropping it in Trash and then installing the newer version, then too, the application works fine.

Hello, Our app uses Network Extension / Packet Tunnel Provider to establish VPN connections on macOS and iOS. We have observed that after creating a utun device and adding any IPv4 routes (NEPacketTunnelNetworkSettings.IPv4Settings), the OS automatically adds several host routes via utun to services such as Akamai, Apple Push, etc. These routes appear to correspond to TCP flows that were active at the moment the VPN connection was established. When a particular TCP flow ends, the corresponding host route is deleted. We understand this is likely intended to avoid breaking existing TCP connections. However, we find the behavior of migrating existing TCP flows to the new utun interface simply because any IPv4 route is added somewhat questionable. This approach would make sense in a "full-tunnel" scenario — for example, when all IPv4 traffic (e.g., 0.0.0.0/0) is routed through the tunnel — but not necessarily in a "split-tunnel" configuration where only specific IPv4 routes are added. Is there any way to control or influence this behavior? Would it be possible for FlowDivert to differentiate between full-tunnel and split-tunnel cases, and only preserve existing TCP flows via utun in the full-tunnel scenario? Thank you.

It works when one device is only a publisher and the other is only a subscriber. However, when both devices act as both publisher and subscriber simultaneously—which Apple’s documentation (https://aninterestingwebsite.com/documentation/wifiaware/adopting-wi-fi-aware#Declare-services) indicates is valid—the connection never establishes. After timing out, both NetworkListener and NetworkBrowser transition to the failed state. This appears to be a race condition in Network framework. Task.detached { try await NetworkListener( for: .wifiAware( .connecting( to: .myService, from: .allPairedDevices, datapath: .defaults ) ), using: .parameters { Coder( sending: ..., receiving: ..., using: NetworkJSONCoder() ) { TCP() } } ).run { connection in await self.add(connection: connection) } } Task.detached { try await NetworkBrowser( for: .wifiAware( .connecting( to: .allPairedDevices, from: .myService ) ), using: .tcp ).run { endpoints in for endpoint in endpoints { await self.connect(to: endpoint) } } }

This is a topic that’s come up a few times on the forums, so I thought I’d write up a summary of the issues I’m aware of. If you have questions or comments, start a new thread in the App & System Services > Networking subtopic and tag it with Network Extension. That way I’ll be sure to see it go by. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Network Extension Provider Packaging There are two ways to package a network extension provider: App extension ( appex ) System extension ( sysex ) Different provider types support different packaging on different platforms. See TN3134 Network Extension provider deployment for the details. Some providers, most notably packet tunnel providers on macOS, support both appex and sysex packaging. Sysex packaging has a number of advantages: It supports direct distribution, using Developer ID signing. It better matches the networking stack on macOS. An appex is tied to the logged in user, whereas a sysex, and the networking stack itself, is global to the system as a whole. Given that, it generally makes sense to package your Network Extension (NE) provider as a sysex on macOS. If you’re creating a new product that’s fine, but if you have an existing iOS product that you want to bring to macOS, you have to account for the differences brought on by the move to sysex packaging. Similarly, if you have an existing sysex product on macOS that you want to bring to iOS, you have to account for the appex packaging. This post summarises those changes. Keep the following in mind while reading this post: The information here applies to all NE providers that can be packaged as either an appex or a sysex. When this post uses a specific provider type in an example, it’s just an example. Unless otherwise noted, any information about iOS also applies to iPadOS, tvOS, and visionOS. Process Lifecycle With appex packaging, the system typically starts a new process for each instance of your NE provider. For example, with a packet tunnel provider: When the users starts the VPN, the system creates a process and then instantiates and starts the NE provider in that process. When the user stops the VPN, the system stops the NE provider and then terminates the process running it. If the user starts the VPN again, the system creates an entirely new process and instantiates and starts the NE provider in that. In contrast, with sysex packaging there’s typically a single process that runs all off the sysex’s NE providers. Returning to the packet tunnel provider example: When the users starts the VPN, the system instantiates and starts the NE provider in the sysex process. When the user stops the VPN, the system stops and deallocates the NE provider instances, but leaves the sysex process running. If the user starts the VPN again, the system instantiates and starts a new instances of the NE provider in the sysex process. This lifecycle reflects how the system runs the NE provider, which in turn has important consequences on what the NE provider can do: An appex acts like a launchd agent [1], in that it runs in a user context and has access to that user’s state. A sysex is effectively a launchd daemon. It runs in a context that’s global to the system as a whole. It does not have access to any single user’s state. Indeed, there might be no user logged in, or multiple users logged in. The following sections explore some consequences of the NE provider lifecycle. [1] It’s not actually run as a launchd agent. Rather, there’s a system launchd agent that acts as the host for the app extension. App Groups With an app extension, the app extension and its container app run as the same user. Thus it’s trivial to share state between them using an app group container. Note When talking about extensions on Apple platforms, the container app is the app in which the extension is embedded and the host app is the app using the extension. For network extensions the host app is the system itself. That’s not the case with a system extension. The system extension runs as root whereas the container app runs an the user who launched it. While both programs can claim access to the same app group, the app group container location they receive will be different. For the system extension that location will be inside the home directory for the root user. For the container app the location will be inside the home directory of the user who launched it. This does not mean that app groups are useless in a Network Extension app. App groups are also a factor in communicating between the container app and its extensions, the subject of the next section. IMPORTANT App groups have a long and complex history on macOS. For the full story, see App Groups: macOS vs iOS: Working Towards Harmony. Communicating with Extensions With an app extension there are two communication options: App-provider messages App groups App-provider messages are supported by NE directly. In the container app, send a message to the provider by calling sendProviderMessage(_:responseHandler:) method. In the appex, receive that message by overriding the handleAppMessage(_:completionHandler:) method. An appex can also implement inter-process communication (IPC) using various system IPC primitives. Both the container app and the appex claim access to the app group via the com.apple.security.application-groups entitlement. They can then set up IPC using various APIs, as explain in the documentation for that entitlement. With a system extension the story is very different. App-provider messages are supported, but they are rarely used. Rather, most products use XPC for their communication. In the sysex, publish a named XPC endpoint by setting the NEMachServiceName property in its Info.plist. Listen for XPC connections on that endpoint using the XPC API of your choice. Note For more information about the available XPC APIs, see XPC Resources. In the container app, connect to that named XPC endpoint using the XPC Mach service name API. For example, with NSXPCConnection, initialise the connection with init(machServiceName:options:), passing in the string from NEMachServiceName. To maximise security, set the .privileged flag. Note XPC Resources has a link to a post that explains why this flag is important. If the container app is sandboxed — necessary if you ship on the Mac App Store — then the endpoint name must be prefixed by an app group ID that’s accessible to that app, lest the App Sandbox deny the connection. See the app groups documentation for the specifics. When implementing an XPC listener in your sysex, keep in mind that: Your sysex’s named XPC endpoint is registered in the global namespace. Any process on the system can open a connection to it [1]. Your XPC listener must be prepared for this. If you want to restrict connections to just your container app, see XPC Resources for a link to a post that explains how to do that. Even if you restrict access in that way, it’s still possible for multiple instances of your container app to be running simultaneously, each with its own connection to your sysex. This happens, for example, if there are multiple GUI users logged in and different users run your container app. Design your XPC protocol with this in mind. Your sysex only gets one named XPC endpoint, and thus one XPC listener. If your sysex includes multiple NE providers, take that into account when you design your XPC protocol. [1] Assuming that connection isn’t blocked by some other mechanism, like the App Sandbox. Inter-provider Communication A sysex can include multiple types of NE providers. For example, a single sysex might include a content filter and a DNS proxy provider. In that case the system instantiates all of the NE providers in the same sysex process. These instances can communicate without using IPC, for example, by storing shared state in global variables (with suitable locking, of course). It’s also possible for a single container app to contain multiple sysexen, each including a single NE provider. In that case the system instantiates the NE providers in separate processes, one for each sysex. If these providers need to communicate, they have to use IPC. In the appex case, the system instantiates each provider in its own process. If two providers need to communicate, they have to use IPC. Managing Secrets An appex runs in a user context and thus can store secrets, like VPN credentials, in the keychain. On macOS this includes both the data protection keychain and the file-based keychain. It can also use a keychain access group to share secrets with its container app. See Sharing access to keychain items among a collection of apps. Note If you’re not familiar with the different types of keychain available on macOS, see TN3137 On Mac keychain APIs and implementations. A sysex runs in the global context and thus doesn’t have access to user state. It also doesn’t have access to the data protection keychain. It must use the file-based keychain, and specifically the System keychain. That means there’s no good way to share secrets with the container app. Instead, do all your keychain operations in the sysex. If the container app needs to work with a secret, have it pass that request to the sysex via IPC. For example, if the user wants to use a digital identity as a VPN credential, have the container app get the PKCS#12 data and password and then pass that to the sysex so that it can import the digital identity into the keychain. Memory Limits iOS imposes strict memory limits an NE provider appexen [1]. macOS imposes no memory limits on NE provider appexen or sysexen. [1] While these limits are not documented officially, you can get a rough handle on the current limits by reading the posts in this thread. Frameworks If you want to share code between a Mac app and its embedded appex, use a structure like this: MyApp.app/ Contents/ MacOS/ MyApp PlugIns/ MyExtension.appex/ Contents/ MacOS/ MyExtension … Frameworks/ MyFramework.framework/ … There’s one copy of the framework, in the app’s Frameworks directory, and both the app and the appex reference it. This approach works for an appex because the system always loads the appex from your app’s bundle. It does not work for a sysex. When you activate a sysex, the system copies it to a protected location. If that sysex references a framework in its container app, it will fail to start because that framework isn’t copied along with the sysex. The solution is to structure your app like this: MyApp.app/ Contents/ MacOS/ MyApp Library/ SystemExtensions/ MyExtension.systemextension/ Contents/ MacOS/ MyExtension Frameworks/ MyFramework.framework/ … … That is, have both the app and the sysex load the framework from the sysex’s Frameworks directory. When the system copies the sysex to its protected location, it’ll also copy the framework, allowing the sysex to load it. To make this work you have to change the default rpath configuration set up by Xcode. Read Dynamic Library Standard Setup for Apps to learn how that works and then tweak things so that: The framework is embedded in the sysex, not the container app. The container app has an additional LC_RPATH load command for the sysex’s Frameworks directory (@executable_path/../Library/SystemExtensions/MyExtension.systemextension/Contents/Frameworks). The sysex’s LC_RPATH load command doesn’t reference the container app’s Frameworks directory (@executable_path/../../../../Frameworks) but instead points to the sysex’s Framweorks directory (@executable_path/../Frameworks). Entitlements When you build an app with an embedded NE extension, both the app and the extension must be signed with the com.apple.developer.networking.networkextension entitlement. This is a restricted entitlement, that is, it must be authorised by a provisioning profile. The value of this entitlement is an array, and the values in that array differ depend on your distribution channel: If you distribute your app directly with Developer ID signing, use the values with the -systemextension suffix. Otherwise — including when you distribute the app on the App Store and when signing for development — use the values without that suffix. Make sure you authorise these values with your provisioning profile. If, for example, you use an App Store distribution profile with a Developer ID signed app, things won’t work because the profile doesn’t authorise the right values. In general, the easiest option is to use Xcode’s automatic code signing. However, watch out for the pitfall described in Exporting a Developer ID Network Extension. Revision History 2025-11-06 Added the Entitlements section. Explained that, with sysex packaging, multiple instances of your container app might connect simultaneously with your sysex. 2025-09-17 First posted.

In my app I have Local Push connectivity for local push notifications. My app has proper entitlment granted by Apple and NEAppPushProvider was working perfectly on older iOS versions before iOS26. The problem I faced with iOS26: when i enable VPN - NEAppPushProvider stops with reason /** @const NEProviderStopReasonNoNetworkAvailable There is no network connectivity. */ case noNetworkAvailable = 3. But device is still connected to proper SSID that is included to matchSSIDs. I discovered it only happens if my VPN config file include this line redirect-gateway def1 without that line NEAppPushProvider works as expected with enabled VPN. I use OpenVPN app. Is it a bug of iOS26 or I need some additional setup? Please help!

General: Forums subtopic: App & System Services > Networking DevForums tag: Network Extension Network Extension framework documentation Routing your VPN network traffic article Filtering traffic by URL sample code Filtering Network Traffic sample code TN3120 Expected use cases for Network Extension packet tunnel providers technote TN3134 Network Extension provider deployment technote TN3165 Packet Filter is not API technote Network Extension and VPN Glossary forums post Debugging a Network Extension Provider forums post Exporting a Developer ID Network Extension forums post Network Extension Framework Entitlements forums post Network Extension vs ad hoc techniques on macOS forums post Network Extension Provider Packaging forums post NWEndpoint History and Advice forums post Extra-ordinary Networking forums post Wi-Fi management: Understanding NEHotspotConfigurationErrorInternal forums post See also Networking Resources for general networking resources, including information about Wi-Fi. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

Hi! I wrote an internal used backup command line tool which is in use since several years. Today I got an error while sending an email: “Failed: ioOnClosedChannel”. I assume that the latest macOS updates did break my app. On the server I use macOS 15.7 and on my development machine macOS 26. Here is the related code: private func sendMail() { var a : [Email.Attachment] = [] if self.imageData != nil { switch self.imageType { case .tiff: a.append(Email.Attachment(name: "Statistics.tif", contentType: #"image/tiff"#, contents: ByteBuffer(bytes: self.imageData!))) case .pdf: a.append(Email.Attachment(name: "Statistics.pdf", contentType: #"application/pdf"#, contents: ByteBuffer(bytes: self.imageData!))) case .unknown: fatalError("Unimplemented attachment type!") } } mailHtml = mailHtml.replacingOccurrences(of: "<br>", with: "<br>\n") let email = Email(sender: .init(name: "Backup", emailAddress: "SENDER@MYDOMAIN"), replyTo: nil, recipients: recipients, cc: [], bcc: [], subject: self.subject, body: .universal(plain: self.mailText, html: mailHtml), attachments: a) let evg = MultiThreadedEventLoopGroup(numberOfThreads: System.coreCount) let mailer = Mailer(group: evg, configuration: smtpConfig, transmissionLogger: nil) do { print("Sending mail... ", terminator: "") try mailer.send(email: email).wait() // <-- ERROR HERE Failed: ioOnClosedChannel print("done.") } catch { print("Failed: \(error)") } do { try evg.syncShutdownGracefully() } catch { print("Failed shutdown: \(error)") } } I use https://github.com/sersoft-gmbh/swift-smtp. Any clue about the reason of this error? TIA, GreatOm

I'm a long-time developer, but pretty new to Swift. I'm trying to get information from a web service (and found code online that I adjusted to build the function below). (Note: AAA_Result -- referenced towards the end -- is another class in my project) Trouble is, I'm getting the subject error on the call to session.dataTask. Any help/suggestions/doc pointers will be greatly appreciated!!! var result: Bool = false var cancellable: AnyCancellable? self.name = name let params = "json={\"\"}}" // removed json details let base_url = URL(string: "https://aaa.yyy.com?params=\(params)&format=json")! // removed URL specifics do { let task = URLSession.shared.dataTask(with: base_url) { data, response, error in if let error = error { print("Error: \(error)") } guard let response = response as? HTTPURLResponse, (200...299).contains(response.statusCode) else { print("Error \(String(describing: response))") } do { let decoder = JSONDecoder() let ar = try decoder.decode(AAA_Result.self, from: response.value) // removed specific details... result = true } catch { print(error) } } task.resume() } catch { print(error) } return result }

I am running a full-tunnel VPN using a Packet Tunnel Provider. During VPN setup, we configure DNS setting with specific DNS servers for all domains to be used by the tunnel. However, our project requires DNS resolution for every domain from both the VPN-provided DNS servers and the ISP’s DNS servers. When I attempt to use c-ares or other third-party libraries to resolve domains via the ISP DNS servers, these libraries only detect and use the VPN DNS servers instead. As a result, all queries fail. Is there a way on iOS to programmatically determine the ISP DNS servers while a full-tunnel VPN is active, or a system API that allows DNS queries to be explicitly resolved using the ISP’s DNS servers?

Hi, I have created an application for NFC tag scanning and read the tag data. For that, i enabled the capability: NearField Communication Tag reading. Then I added 2 tag formats in the entitlement then i added info.plist: NFCReaderUsageDescription We need to use NFC com.apple.developer.nfc.readersession.felica.systemcodes 8005 8008 0003 fe00 90b7 927a 12FC 86a7 com.apple.developer.nfc.readersession.iso7816.select-identifiers D2760000850100 D2760000850101 but even though when i run the app and tap the nfc card im getting some error: NFCTag didBecomeActive 2025-08-29 19:08:12.272278+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.282869+0530 SAFRAN_NFC[894:113520] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.284044+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling 2025-08-29 19:08:12.372116+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.381535+0530 SAFRAN_NFC[894:113378] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.382246+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling 2025-08-29 19:08:12.470667+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.479336+0530 SAFRAN_NFC[894:113378] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.480101+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling Could you please help me wha tis the issue and give solution for that?

How often do we see control filter start and stop? I read somewhere that data filter is long lived and control Filter is short lived. When does the operating system kills the control filter process?

Is Apple's Wi-Fi Aware certified by the Wi-Fi Alliance? Is there any non-compliance of Apple's Wi-Fi Aware with the Wi-Fi Alliance standards? Does Apple have a roadmap to switch AWDL to Wi-Fi Aware? Does Apple have plans to adopt Wi-Fi Aware in Mac computers?

Hi everyone, I’m currently developing a macOS app that is distributed via a DMG file on our website. The app includes an App Extension (appex) for Network Extension functionality. I’m wondering if distributing via DMG on the web requires the app extension to be implemented as a System Extension instead of an App Extension. Is it necessary to migrate to System Extension for web-based DMG distribution, or can I continue using App Extension as is? Any insights or recommendations would be greatly appreciated. Thank you!

I am developing an iOS application using NWPathMonitor for network connectivity monitoring. We discovered a reproducible issue where disabling and re-enabling WiFi triggers an unexpected network status sequence. ENVIRONMENT: iOS Version: 17.x Device: iPhone (various models tested) Network Framework: NWPathMonitor from iOS Network framework STEPS TO REPRODUCE: Device connected to WiFi normally Disable WiFi via Settings or Control Center Re-enable WiFi via Settings or Control Center EXPECTED BEHAVIOR: WiFi reconnects and NWPathMonitor reports stable satisfied status ACTUAL BEHAVIOR: T+0s: WiFi re-enables, NWPathMonitor reports path.status = .satisfied T+8s: NWPathMonitor unexpectedly reports path.status = .unsatisfied with unsatisfiedReason = .notAvailable T+9-10s: NWPathMonitor reports path.status = .satisfied again Connection becomes stable afterward NETWORK PATH TIMELINE: T+0s: satisfied (IPv4: true, DNS: false) T+140ms: satisfied (IPv4: true, DNS: true) T+8.0s: unsatisfied (reason: notAvailable, no interfaces available) T+10.0s: satisfied (IPv4: true, DNS: true) KEY OBSERVATIONS: Timing consistency: unsatisfied event always occurs ~8 seconds after reconnection resolution: "Reset Network Settings" eliminates this behavior TECHNICAL QUESTIONS: What causes the 8-second delayed unsatisfied status after WiFi re-enablement? Is this expected behavior that applications should handle? Why does reset network setting in iPhone fix this issue?

Hello, I am currently investigating if we can disable usage of QUIC on application level. I know we can set enable_quic from /Library/Preferences/com.apple.networkd.plist to false but it will have a global impact since this is a system file, all the applications on machine will stop using QUIC. I don't want that. What i am looking for is to disable QUIC only for my application. Is there any way i can modify URLSession object in my application and disable QUIC? or modify URLSessionConfiguration so system will not use QUIC?

Hello, I'm working on a Transparent Proxy and when the proxy is being stopped, I'm stopping all the flows by calling flow.closeWriteWithError(POSIXError(.ECANCELED)) flow.closeReadWithError(POSIXError(.ECANCELED)) Then all the flows are deallocated. When deallocating the flow the crash occurs: OS Version: macOS 14.1.2 (23B92) Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000001, 0x000000018c2ef704 Termination Reason: Namespace SIGNAL, Code 5 Trace/BPT trap: 5 Terminating Process: exc handler [553] Thread 32 Crashed:: Dispatch queue: <my dispatch queue> 0 CoreFoundation 0x18c2ef704 CF_IS_OBJC + 76 1 CoreFoundation 0x18c23f61c CFErrorGetDomain + 32 2 libnetworkextension.dylib 0x19fe56a00 flow_error_to_errno + 28 3 libnetworkextension.dylib 0x19fe56920 flow_handle_pending_write_requests + 216 4 libnetworkextension.dylib 0x19fe5667c __NEFlowDeallocate + 380 5 CoreFoundation 0x18c2efe28 _CFRelease + 292 6 NetworkExtension 0x19d208390 -[NEAppProxyFlow dealloc] + 36 Is there any way to debug what is happening and if it's related to closing the flow with POSIXError? Thank you

I am trying to intercept localhost connections within NETransparentProxyProvider system extension. As per NENetworkRule documentation If the address is a wildcard address (0.0.0.0 or ::) then the rule will match all destinations except for loopback (127.0.0.1 or ::1). To match loopback traffic set the address to the loopback address. I tried to add NWHostEndpoint *localhostv4 = [NWHostEndpoint endpointWithHostname:@"127.0.0.1" port:@""]; NENetworkRule *localhostv4Rule = [[NENetworkRule alloc] initWithDestinationNetwork:localhostv4 prefix:32 protocol:NENetworkRuleProtocolAny]; in the include network rules. I tried several variations of this rule like port 0, prefix 0 and some others. But the provider disregards the rule and the never receives any traffic going to localhost on any port. Is there any other configuration required to receive localhost traffic in NETransparentProxyProvider?

This issue has cropped up many times here on DevForums. Someone recently opened a DTS tech support incident about it, and I used that as an opportunity to post a definitive response here. If you have questions or comments about this, start a new thread and tag it with Network so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" iOS Network Signal Strength The iOS SDK has no general-purpose API that returns Wi-Fi or cellular signal strength in real time. Given that this has been the case for more than 10 years, it’s safe to assume that it’s not an accidental omission but a deliberate design choice. For information about the Wi-Fi APIs that are available on iOS, see TN3111 iOS Wi-Fi API overview. Network performance Most folks who ask about this are trying to use the signal strength to estimate network performance. This is a technique that I specifically recommend against. That’s because it produces both false positives and false negatives: The network signal might be weak and yet your app has excellent connectivity. For example, an iOS device on stage at WWDC might have terrible WWAN and Wi-Fi signal but that doesn’t matter because it’s connected to the Ethernet. The network signal might be strong and yet your app has very poor connectivity. For example, if you’re on a train, Wi-Fi signal might be strong in each carriage but the overall connection to the Internet is poor because it’s provided by a single over-stretched WWAN. The only good way to determine whether connectivity is good is to run a network request and see how it performs. If you’re issuing a lot of requests, use the performance of those requests to build a running estimate of how well the network is doing. Indeed, Apple practices what we preach here: This is exactly how HTTP Live Streaming works. Remember that network performance can change from moment to moment. The user’s train might enter or leave a tunnel, the user might step into a lift, and so on. If you build code to estimate the network performance, make sure it reacts to such changes. Keeping all of the above in mind, iOS 26 beta has two new APIs related to this issue: Network framework now offers a linkQuality property. See this post for my take on how to use this effectively. The WirelessInsights framework can notify you of anticipated WWAN condition changes. But what about this code I found on the ’net? Over the years various folks have used various unsupported techniques to get around this limitation. If you find code on the ’net that, say, uses KVC to read undocumented properties, or grovels through system logs, or walks the view hierarchy of the status bar, don’t use it. Such techniques are unsupported and, assuming they haven’t broken yet, are likely to break in the future. But what about Hotspot Helper? Hotspot Helper does have an API to read Wi-Fi signal strength, namely, the signalStrength property. However, this is not a general-purpose API. Like the rest of Hotspot Helper, this is tied to the specific use case for which it was designed. This value only updates in real time for networks that your hotspot helper is managing, as indicated by the isChosenHelper property. But what about MetricKit? MetricKit is so cool. Amongst other things, it supports the MXCellularConditionMetric payload, which holds a summary of the cellular conditions while your app was running. However, this is not a real-time signal strength value. But what if I’m working for a carrier? This post is about APIs in the iOS SDK. If you’re working for a carrier, discuss your requirements with your carrier’s contact at Apple. Revision History 2025-07-02 Updated to cover new features in the iOS 16 beta. Made other minor editorial changes. 2022-12-01 First posted.