We have observed an internet access issue after the device enters idle mode on iOS 26 beta 9. Although the Ivanti Secure Access Client appears connected, users are unable to access any resources (internet or intranet) after unlocking the device from idle. When we check the log socket connection looks not disrupted, packets are tunnelled but no resource access. Split tunnel enabled and proxy PAC configured. This was observed on both iOS and iPadOS 26 beta. Steps to reproduce: Connecting to the internet, launching the Ivanti client, locking the device, and then unlocking it after a brief period of idle. The issue occurs when the VPN remains connected but no resources are accessible.

Howdy, I've been developing a packet tunnel extension meant to run on iOS and MacOS. For development I'm using xcodegen + xcodebuild to assemble a bunch of swift and rust code together. I'm moving from direct TUN device management on Mac to shipping a Network Extension (appex). With that move I noticed that on some mac laptops NE fails to start completely, whilst on others everything works fine. I'm using CODE_SIGN_STYLE: Automatic, Apple IDs are within the same team, all devices are registered as dev devices. Signing dev certificates, managed by xcode. Some suspicious logs: (NetworkExtension) [com.apple.networkextension:] Signature check failed: code failed to satisfy specified code requirement(s) ... (NetworkExtension) [com.apple.networkextension:] Provider is not signed with a Developer ID certificate What could be the issue? Where those inconsistencies across devices might come from?

I am in the middle of investigating an issue arising in the call to setsockopt syscall where it returns an undocumented and unexpected errno. As part of that, I'm looking for a way to list any socket content filters or any such extensions are in play on the system where this happens. To do that, I ran: systemextensionsctl list That retuns the following output: 0 extension(s) which seems to indicate there's no filters or extensions in play. However, when I do: netstat -s among other things, it shows: net_api: 2 interface filters currently attached 2 interface filters currently attached by OS 2 interface filters attached since boot 2 interface filters attached since boot by OS ... 4 socket filters currently attached 4 socket filters currently attached by OS 4 socket filters attached since boot 4 socket filters attached since boot by OS What would be the right command/tool/options that I could use to list all the socket filters/extensions (and their details) that are in use and applicable when a call to setsockopt is made from an application on that system? Edit: This is on a macosx-aarch64 with various different OS versions - 13.6.7, 14.3.1 and even 14.4.1.

I upgraded my Mac to Sequoia 15.4.1 an i hat to upgrade XCode to Version 16.3. I access a MQTT Broker by an sending an mosquitto_sub request to the Broker. Now its no longer possible the request fails i granted Network permission to my App

Greetings, I would like to understand this URLCache behavior for two different requests to the same end point but with a different header value. Here is a code with comment explaining the behavior. // Create a request to for a url. let url = URL(string: "https://<my url>?f=json")! var request = URLRequest(url: url) // Set custom header with a value. request.setValue("myvalue", forHTTPHeaderField: "CustomField") // Send request to get the response. let (data, response) = try await URLSession.shared.data(for: request) print("data: \(String(describing: String(data: data, encoding: .utf8)))") print("response: \(response)") // Create second request to the same url but with different value of custom header field. var request2 = URLRequest(url: url) request2.setValue("newvalue", forHTTPHeaderField: "CustomField") // Check the URL cache for second request and it returns the response // of the first request even though the second request has different header value. let cachedResponse = URLCache.shared.cachedResponse(for: request2) print("cachedResponse: \(cachedResponse?.response)") Is this a bug in URLCache that request headers are not matched while returning the response? Is this an expected behavior? If yes, why?

I have written an App which extracts data, over WiFi, from an instrument that creates its own WiFi Hotspot. The instrument provides no internet connection. The iPad version of this App is connects fine and is assigned an IP address by DHCP server running on a MicroChip RN171 wifi module. iOS assigns an obscure IP address on a completely different subnet. I understand this is iOS' way of "Complaining" that is wasn't assigned an IP address. Consequently in the case of the iPhone I am forced to manually assign an IP address for the iPhone, the mask and the gateway. Only then is the connection successful. Anyone know why the iPhone won't talk DHCP to a WiFi module not connected to the internet? Are there perhaps some parameters that I need to adjust on either the iPhone or WiFi module?

We’re having an iPad issue accessing the local network with iPadOS 26.3. We have an automation system that tests our app on an iPad using accessibility tags. the XCTest test code sends messages from the iPad via TCP/IP to setup external test equipment. The messages abruptly stopped transmitting across the iPad blood-brain barrier with iPadOS 26.3 (26.2.1 and earlier works fine). The technique that worked involved installing a helper app with the same bundleID as our app, allowing the helper app to access the network, and when our app runs it has network access through the helper. It’s clever and kludgey. Forums that we referenced in the past: https://aninterestingwebsite.com/forums/thread/663858 TN3179: Understanding local network privacy | Apple Developer Documentation I suspect that something was changed in 26.3 that closed our window. I need two things: ID what is different in 26.3 and fix the automation system. If there’s a new way for XCUITest code to access the local network I’m happy to try it out.

I filed FB19631435 about this just now. Basically: starting with 15.6, we've had reports (internally and outternally) that after some period of time, networking fails so badly that it can't even acquire a DHCP lease, and the system needs to be rebooted to fix this. The systems in question all have at least 2 VPN applications installed; ours is a transparent proxy provider, and the affected system also had Crowdstrike's Falcon installed. A customer system reported seemingly identical failures on their systems; they don't have Crowdstrike, but they do have Cyberhaven's. Has anyone else seen somethng like this? Since it seems to involve three different networking extensions, I'm assuming it's due to an interaction between them, not a bug in any individual one. But what do I know? 😄

Hello Everyone, I am currently using macOS 15.5 and XCode 16.4. I am using the following code to send/receive multicast packets on multicast group ff02::1 and port 49153 using Apple NF's NWConnectionGroup. import Network import Foundation // Creating a mutlicast group endpoint let multicastIPv6GroupEndpoint: NWEndpoint = NWEndpoint.hostPort(host: NWEndpoint.Host.ipv6(IPv6Address("ff02::1")!), port: NWEndpoint.Port("49153")!) do { let multicastGroupDescriptor: NWMulticastGroup = try NWMulticastGroup (for: [multicastIPv6GroupEndpoint]) let multicastConnectionGroupDescriptor = NWConnectionGroup (with: multicastGroupDescriptor, using: .udp) multicastConnectionGroupDescriptor.stateUpdateHandler = { state in print ("🕰️ Connection Group state: \(state)") if state == .ready { multicastConnectionGroupDescriptor.send (content: "👋🏻 Hello from the Mac 💻".data (using: .utf8)) { err in print ("➡️ Now, I am trying to send some messages.") if let err = err { print ("💥 Error sending multicast message: \(err)") } else { print ("🌚 Initial multicast message sent") } } } } multicastConnectionGroupDescriptor.setReceiveHandler { message, content, isComplete in if let content = content, let messageString = String (data: content, encoding: .utf8) { print ("⬅️ Received message: \(messageString)") } } multicastConnectionGroupDescriptor.start (queue: .global()) } catch { print ("💥 Error while creating Multicast Group: \(error)") } RunLoop.main.run() I am able to successfully create a NWConnectionGroup without any warnings/errors. The issue occurs when the stateUpdateHandler's callback gets invoked. It first gives me this warning: nw_listener_socket_inbox_create_socket IPV6_LEAVE_GROUP ff02::1.49153 failed [49: Can't assign requested address But then it shows me that the state is ready: 🕰️ Connection Group state: ready After this, when the send is performed, it gives me a bunch of errros: nw_endpoint_flow_failed_with_error [C1 ff02::1.49153 waiting parent-flow (unsatisfied (Local network prohibited), interface: en0[802.11], ipv4, ipv6, uses wifi)] already failing, returning nw_socket_connect [C1:1] connectx(7, [srcif=0, srcaddr=::.62838, dstaddr=ff02::1.49153], SAE_ASSOCID_ANY, 0, NULL, 0, NULL, SAE_CONNID_ANY) failed: [48: Address already in use] nw_socket_connect [C1:1] connectx failed (fd 7) [48: Address already in use] nw_socket_connect connectx failed [48: Address already in use] nw_endpoint_flow_failed_with_error [C1 ff02::1.49153 in_progress socket-flow (satisfied (Path is satisfied), interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] already failing, returning There is no other background process running on the same port. I tried using different ports as well as multicast groups but the same error persists. The same code works fine for an IPv4 multicast group. I have following questions: Why am I getting these errors specifically for IPv6 multicast group but not for IPv4 multicast group? Are there any configurations that needed to be done in order to get this working?

Hello eveybody,Currently I'm working on an app which connects to a device. During testing I encounter an internal error of NEHotspotConfigurationErrorDomain. See the log snippet:Domain=NEHotspotConfigurationErrorDomain Code=8 "internal error." UserInfo={NSLocalizedDescription=internal error.}This error appears randomly. In one day I encountered it three times. The only solution I can think of is catching this error somehow and then telling the user to restart the device.After this error appears, the wifi functionality of iOS in all third party apps seems to be broken. Only restarting helps as far as I know. Also there seems to be nothing we as app developers can do about it. Therefor I wonder if there is some way to prevent this error somehow? The only solution I can think of is catching this error somehow and then telling the user to restart the device.Also since there is not much information about this error on the web, it would be really nice if someone can clarify whats going on with this error.Regards.

I have a custom VPN app that uses NETunnelProviderManager to install a VPN Profile if one is not already installed. On previous iOS versions this would open the VPN Settings and ask for either the PIN, FaceID or TouchID and install the profile. With iOS 26 beta5 it opens the VPN Settings and stops. Is this a bug in iOS 26? Have there been changes to NETunnelProviderManager for iOS 26 that I'm not aware of? FYI we do the samething on macOS 26 beta5 and that works as expected.

All of our uses of CFSockets have started causing crashes in iOS 16. They seem to be deprecated so we are trying to transition over to using the Network framework and NWConnection to try to fix the crashes. One of our uses of them is to ping a device on the local network to make sure it is there and online and provide a heartbeat status in logs as well as put the application into a disabled state if it is not available as it is critical to the functionality of the app. I know it is discouraged to disable any functionality based on the reachability of a resource but this is in an enterprise environment where the reachability of this device is mission critical. I've seen other people ask about the ability to ping with the Network framework and the answers I've found have said that this is not possible and pointed people to the SimplePing sample code but it turns out our existing ping code is already using this technique and it is crashing just like our other CFSocket usages, inside CFSocketInvalidate with the error BUG IN CLIENT OF LIBPLATFORM: Trying to recursively lock an os_unfair_lock. Is there any updated way to perform a ping without using the CFSocket APIs that now seem to be broken/unsupported on iOS 16?

As per : TN3120: Expected use cases for Network Extension packet tunnel providers | Apple Developer Documentation It is clear that Packets that are read from NEPacketTunnelFlow are meant to be sent over a tunnel connection to a remote server for injection into a remote network. They are not meant to be dropped or re-injected back into the system. In my usecase: NEPacketTunnelProvider is separate process. which reads the packet using packetFlow.readPacketObjects Send it over to other process i.e privileged helper(Non-bundle/command line tool/non sandboxed) via UDS IPC. Helpers send to to remote tunnel and return back the packet to NEPacketTunnelFlow via same IPC. NEPacketTunnelProvider uses packetFlow.writePacketObjects to inject packets. Things works fine. We don't distribute it via Appstore. We are now attempting to implement a on device bypass mechanism from helper tool side. Could you please suggest if there is any approach I could try, even if it involves proceeding at my own risk?

Our application uses NEFilterPacketProvider to filter network traffic and we sometimes get a wired crash when removing/updating the network extension. It only happens on MacOS 11-12 . The crashing thread is always this one and it shows up after I call the completionHandler from the stopFilter func Application Specific Information: BUG IN CLIENT OF LIBDISPATCH: Release of a suspended object Thread 6 Crashed:: Dispatch queue: com.apple.network.connections 0 libdispatch.dylib 0x00007fff2039cc35 _dispatch_queue_xref_dispose.cold.1 + 24 1 libdispatch.dylib 0x00007fff20373808 _dispatch_queue_xref_dispose + 50 2 libdispatch.dylib 0x00007fff2036e2eb -[OS_dispatch_source _xref_dispose] + 17 3 libnetwork.dylib 0x00007fff242b5999 __nw_queue_context_create_source_block_invoke + 41 4 libdispatch.dylib 0x00007fff2036d623 _dispatch_call_block_and_release + 12 5 libdispatch.dylib 0x00007fff2036e806 _dispatch_client_callout + 8 6 libdispatch.dylib 0x00007fff203711b0 _dispatch_continuation_pop + 423 7 libdispatch.dylib 0x00007fff203811f4 _dispatch_source_invoke + 1181 8 libdispatch.dylib 0x00007fff20376318 _dispatch_workloop_invoke + 1784 9 libdispatch.dylib 0x00007fff2037ec0d _dispatch_workloop_worker_thread + 811 10 libsystem_pthread.dylib 0x00007fff2051545d _pthread_wqthread + 314 11 libsystem_pthread.dylib 0x00007fff2051442f start_wqthread + 15 I do have a DispatchSourceTimer but I cancel it in the stop func. Any ideas on how to tackle this?

iOS Development environment Xcode 16.4, macOS 15.6.1 (24G90) Run-time configuration: iOS 17.2+ Short Description After having successfully established an NWConnection (either as UDP or TCP), and subsequently receiving the error code: UDP Connection failed: 57 The operation couldn't be completed. (Network.NWError error 57 - Socket is not connected), available Interfaces: [enO] via NWConnection.stateUpdateHandler = { (newState) in ... } while newState == .failed the data connection does not restart by itself once cellular (RF) telephony coverage is established again. Detailed Description Context: my app has a continuous cellular data connection while in use. Either a UDP or a TCP connection is established depending on the user settings. The setup data connection works fine until the data connection gets disconnected by loss of connection to a available cellular phone base station. This disconnection simply occurs in very poor UMTS or GSM cellular phone coverage. This is totally normal behavior in bad reception areas like in mountains with signal loss. STEPS TO REPRODUCE Pre-condition App is running with active data connection. Action iPhone does loss the cellular data connection previously setup. Typically reported as network error code 57. Observed The programmed connection.stateUpdateHandler() is called in network connection state '.failed' (OK). The self-programmed data re-connection includes: a call to self.connection.cancel() a call to self.setupUDPConnection() or self.setupConnection() depending on the user settings to re-establish an operative data connection. However, the iPhone's UMTS/GSM network data (re-)connection state is not properly identified/notified via NWConnection API. There's no further network state notification by means of NWConnection even though the iPhone has recovered a cellular data network. Expected The iPhone or any other means automatically reconnects the interrupted data connection on its own. The connection.stateUpdateHandler() is called at time of the device's networking data connection (RF) recovering, subsequently to a connection state failed with error code 57, as the RF module is continuously (independently from the app) for available telephony networks. QUESTION How to systematically/properly detect a cellular phone data network reconnection readiness in order to causally reinitialize the NWConnection data connection available used in app. Relevant code extract Setup UDP connection (or similarly setup a TCP connection) func setupUDPConnection() { let udp = NWProtocolUDP.Options.init() udp.preferNoChecksum = false let params = NWParameters.init(dtls: nil, udp: udp) params.serviceClass = .responsiveData // service type for medium-delay tolerant, elastic and inelastic flow, bursty, and long-lived connections connection = NWConnection(host: NWEndpoint.Host.name(AppConstant.Web.urlWebSafeSky, nil), port: NWEndpoint.Port(rawValue: AppConstant.Web.urlWebSafeSkyPort)!, using: params) connection.stateUpdateHandler = { (newState) in switch (newState) { case .ready: //print("UDP Socket State: Ready") self.receiveUDPConnection(). // data reception works fine until network loss break case .setup: //print("UDP Socket State: Setup") break case .cancelled: //print("UDP Socket State: Cancelled") break case .preparing: //print("UDP Socket State: Preparing") break case .waiting(let error): Logger.logMessage(message: "UDP Connection waiting: "+error.errorCode.description+" \(error.localizedDescription), available Interfaces: \(self.connection.currentPath!.availableInterfaces.description)", LoggerLevels.Error) break case .failed(let error): Logger.logMessage(message: "UDP Connection failed: "+error.errorCode.description+" \(error.localizedDescription), available Interfaces: \(self.connection.currentPath!.availableInterfaces.description)", LoggerLevels.Error) // data connection retry (expecting network transport layer to be available) self.reConnectionServer() break default: //print("UDP Socket State: Waiting or Failed") break } self.handleStateChange() } connection.start(queue: queue) } Handling of network data connection loss private func reConnectionServer() { self.connection.cancel() // Re Init Connection - Give a little time to network recovery let delayInSec = 30.0. // expecting actually a notification for network data connection availability, instead of a time-triggered retry self.queue.asyncAfter(deadline: .now() + delayInSec) { switch NetworkConnectionType { case 1: self.setupUDPConnection() // UDP break case 2: self.setupConnection() // TCP break default: break } } } Does it necessarily require the use of CoreTelephony class CTTelephonyNetworkInfo or class CTCellularData to get notifications of changes to the user’s cellular service provider?

Our application has initiated an NSURLSession data task, and we have received an initiation ID. However, Application not received callback on the subsequent activity: the task has not been requested, has not timed out, and no error callback has been received. [06/17 09:29:40:559][ 0x282a7d8c0] Requested TaskIdentifier 120 2025-06-17 09:29:40.623337 +0530 nsurlsessiond SUBMITTING: com.apple.CFNetwork-cc-166-373-Task .<120>:A71666 default 2025-06-17 09:29:40.631280 +0530 dasd Submitted Activity: com.apple.CFNetwork-cc-166-373-Task .<120>:A71666 at priority 10 default Seen couple of rejection with for CPUUsagePolicy and MemoryPressurePolicy 2025-06-17 09:29:40.989360 +0530 dasd com.apple.CFNetwork-cc-166-373-Task .<120>:A71666:[ {name: CPUUsagePolicy, policyWeight: 5.000, response: {Decision: Must Not Proceed, Score: 0.00, Rationale: [{[Max allowed CPU Usage level]: Required:90.00, Observed:95.00},]}} {name: MemoryPressurePolicy, policyWeight: 5.000, response: {Decision: Must Not Proceed, Score: 0.00, Rationale: [{[memoryPressure]: Required:1.00, Observed:2.00},]}} ], FinalDecision: Must Not Proceed} default 2025-06-17 10:55:22.500277 +0530 dasd com.apple.CFNetwork-cc-166-373-Task .<120>:A71666:[ {name: MemoryPressurePolicy, policyWeight: 5.000, response: {Decision: Must Not Proceed, Score: 0.00, Rationale: [{[memoryPressure]: Required:1.00, Observed:2.00},]}} ], FinalDecision: Must Not Proceed} default And more an hour later then it throws with an error BUT NEVER indicated the same to client 2025-06-17 10:55:27.426549 +0530 WAVE PTX Task .<120> is for <>.<>.<120> default 2025-06-17 10:55:27.776951 +0530 nsurlsessiond Task .<120> summary for task failure {transaction_duration_ms=5147145, response_status=-1, connection=0, reused=1, request_start_ms=0, request_duration_ms=0, response_start_ms=0, response_duration_ms=0, request_bytes=0, response_bytes=0, cache_hit=false} default 2025-06-17 10:55:27.777096 +0530 nsurlsessiond NDSession <714296D7-20F9-4A0A-8C31-71FB67F39A56> Task .<120> for client will be retried after error Error Domain=_nsurlsessiondErrorDomain Code=6 UserInfo={NSErrorFailingURLStringKey=, NSErrorFailingURLKey=, _NSURLErrorRelatedURLSessionTaskErrorKey=, _NSURLErrorFailingURLSessionTaskErrorKey=} - code: 6 default Then It got resumed and says successful but never got any callback on the same to client 2025-06-17 10:55:28.877245 +0530 nsurlsessiond NDSession <714296D7-20F9-4A0A-8C31-71FB67F39A56> Task .<120> resuming default 2025-06-17 10:55:55.225456 +0530 nsurlsessiond Task .<120> received response, status 401 content K default 2025-06-17 10:55:55.250371 +0530 nsurlsessiond Task .<120> finished successfully default Please refer feedback for diagnose logs: https://feedbackassistant.apple.com/feedback/18173303

We have an old iOS app and an old camera that connects using Wi-Fi either using an access point or Ad Hoc network, e.g., iPhone/iPad connects to the camera's Wi-Fi directly... How it works (old legacy app/system, which cannot be redesigned): Camera is configured to Ad Hoc Wi-Fi network (insecure TCP). iPhone connects to this insecure Wi-Fi. Camera uses Bonjour service to broadcast its IP address. App reads in IP address and begin to send messages to the camera using NSMutableURLRequest, etc. All this works fine for iOS 17. But in iOS 18 step 4 stopped working. App simply doesn't get any responses! We believe we have configured ATS properly (App Store version): In panic we have also tried this in Test Flight version: The latter actually seemed to make a difference when running the app on macOS Apple Silicon. But on iOS it didn't seem to make any difference. Occasionally, I was lucky to get connection on on iPhone 16 Pro with iOS 18. But for the 'many' iPads I have tried I couldn't. I also tried to install CFNetwork profile and look at the logs but I believe I just got timeout on the requests. Questions: Why it iOS 18 different? Bonjour works fine, but NSSURLRequests doesn't Do we configure ATS correctly for this scenario? What should I look for in the Console log when CFNetwork profile is installed? Should I file a TSI? Thanks! :)

TL;DR: How does one use DNSServiceReconfirmRecord() to invalidate mDNS state of a device that's gone offline? I'm using the DNSServiceDiscovery API (dns_sd.h) for a local P2P service. The problem I'm trying to solve is how to deal with a peer that abruptly loses connectivity, i.e. by turning off WiFi or simply by moving out of range or otherwise losing connectivity. In this situation there is of course no notification that the peer device has gone offline; it simply stops sending any packets. After my own timeout mechanism determines the peer is not responding, I mark it as offline in my own data structures. The problem is how to discover when/if it comes back online later. My DNSServiceBrowse callback won't be invoked because mDNS doesn't know the device went offline in the first place. I am trying to use DNSServiceReconfirmRecord, which appears to be for exactly this use case -- "Instruct the daemon to verify the validity of a resource record that appears to be out of date (e.g. because TCP connection to a service's target failed.)" However my attempts always return a BadReference error (-65541). The function requires me to pass a DNS record, and the only one I know is the TXT record; perhaps it needs a different one? Which, and how would I get it? Thanks!

When the machine connects to the network cable through the Thunderbolt interface using the docking station, if the Network Extension shown in the following code is running at this time, after unplugging and reinserting the docking station, the machine will not be able to obtain a valid IP address through DHCP until the system is restarted. @interface MyTransparentProxyProvider : NETransparentProxyProvider @end @implementation MyTransparentProxyProvider - (void)startProxyWithOptions:(NSDictionary *)options completionHandler:(void (^)(NSError *))completionHandler { NETransparentProxyNetworkSettings *objSettings = [[NETransparentProxyNetworkSettings alloc] initWithTunnelRemoteAddress:@"127.0.0.1"]; // included rules NENetworkRule *objIncludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrIncludedNetworkRules = [NSMutableArray array]; [arrIncludedNetworkRules addObject:objIncludedNetworkRule]; objSettings.includedNetworkRules = arrIncludedNetworkRules; // apply [self setTunnelNetworkSettings:objSettings completionHandler: ^(NSError * _Nullable error) { // TODO } ]; if (completionHandler != nil) completionHandler(nil); } - (BOOL)handleNewFlow:(NEAppProxyFlow *)flow { return NO; } @end This problem will not occur if the IP of the DNS server or all UDP ports 53 are excluded in the Network Extension. @interface MyTransparentProxyProvider : NETransparentProxyProvider @end @implementation MyTransparentProxyProvider - (void)startProxyWithOptions:(NSDictionary *)options completionHandler:(void (^)(NSError *))completionHandler { NETransparentProxyNetworkSettings *objSettings = [[NETransparentProxyNetworkSettings alloc] initWithTunnelRemoteAddress:@"127.0.0.1"]; // included rules NENetworkRule *objIncludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrIncludedNetworkRules = [NSMutableArray array]; [arrIncludedNetworkRules addObject:objIncludedNetworkRule]; // excluded rules NENetworkRule *objExcludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:[NWHostEndpoint endpointWithHostname:@"" port:@(53).stringValue] remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolUDP direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrExcludedNetworkRules = [NSMutableArray array]; [arrExcludedNetworkRules addObject:objExcludedNetworkRule]; objSettings.includedNetworkRules = arrIncludedNetworkRules; objSettings.excludedNetworkRules = arrExcludedNetworkRules; // apply [self setTunnelNetworkSettings:objSettings completionHandler: ^(NSError * _Nullable error) { // TODO } ]; if (completionHandler != nil) completionHandler(nil); } - (BOOL)handleNewFlow:(NEAppProxyFlow *)flow { return NO; } @end Is MyTransparentProxyProvider in what place do wrong? To handle the connection on port 53, it is necessary to add the implementation of NEDNSProxyProvider? In -[MyTransparentProxyProvider handleNewFlow:] how to reverse DNS? getnameinfo() doesn't work, it returns EAI_NONAME.

With my UDP Flow Copier working as demonstrated by the fact that it is proxying DNS traffic successfully, I am finally writing tests to verify UDP packet filtering. I'm sending packets to a public UDP echo server and reading the response successfully. In my initial testing however the TransparentProxyProvider System Extension is not intercepting my UDP traffic. handleNewUDPFlow() is being called for DNS but not for my test case UDP echo sends and receives. I've tried sending UDP with both GCDAsyncSocket and NWConnection as: connection = NWConnection(host: host, port: port, using: .udp) Is there some other criteria for UDP datagrams to be intercepted? Google search suggests this might be a known issue for connected or async UDP sockets.