Hi, I'm experiencing intermittent delays with URLSession where requests take 3-4 seconds to be sent, even though the actual server processing is fast. This happens randomly, maybe 10-20% of requests. The pattern I've noticed is I create my request I send off my request using try await urlSession.data(for: request) My middleware ends up receiving this request 4-7s after its been fired from the client-side The round trip ends up taking 4-7s! This hasn't been reproducible consistently at all on my end. I've also tried ephemeral URLSessions (so recreating the session instead of using .shared so no dead connections, but this doesn't seem to help at all) Completely lost on what to do. Please help!

We have an iOS companion app that talks to our IoT device over the device’s own Wi‑Fi network (often with no internet). The app performs bi-directional, safety-critical duties over that link. We use an NEAppPushProvider extension so the handset can keep exchanging data while the UI is backgrounded. During testing we noticed that if the user backgrounds the app (still connected to the device’s Wi‑Fi) and opens Safari, the extension’s stop is invoked with NEProviderStopReason.unrecoverableNetworkChange / noNetworkAvailable, and iOS tears the extension down. Until the system restarts the extension (e.g. the user foregrounds our app again), the app cannot send/receive its safety-critical data. Questions: Is there a supported way to stop a safety-critical NEAppPushProvider from being terminated in this “background app → open Safari” scenario when the device remains on the same Wi‑Fi network (possibly without internet)? If not, is NEAppPushProvider the correct extension type for an always-on local-network use case like this, or is there another API we should be using? For safety-critical applications, can Apple grant entitlements/exemptions so the system does not terminate the extension when the user switches apps but stays on the local Wi‑Fi? Any guidance on the expected lifecycle or alternative patterns for safety-critical local connectivity would be greatly appreciated.

Hello, I have encountered an issue with an iPhone 15PM with iOS 18.5. The NSHTTPCookieStorage failed to clear cookies, after clearing them, I was still able to retrieve them. However, on the same system NSHTTPCookie *cookie; NSHTTPCookieStorage *storage = [NSHTTPCookieStorage sharedHTTPCookieStorage]; for (cookie in [storage cookies]) { [storage deleteCookie:cookie]; } NSArray *cookies = [[NSHTTPCookieStorage sharedHTTPCookieStorage] cookiesForURL:[[self url] absoluteURL]]; // still able to get cookies,why???

Our app is developed for iOS, but some users also run it on macOS (as an iOS app via Apple Silicon). The app requires local network permission, which works perfectly on iOS. Previously, the connection also worked fine on macOS, but since the recent macOS update, the app can no longer connect to our device. Additionally, our app on macOS doesn't prompt for local network permission at all, whereas it does on iOS. Is this a known issue with iOS apps running on macOS? Has anyone else experienced this problem, or is there a workaround? Any help would be appreciated!

Hello, I have encountered an issue with an iPhone 15PM with iOS 18.5. The NSHTTPCookieStorage failed to clear cookies, but even after clearing them, I was still able to retrieve them. However, on the same system It is normal on iPhone 14PM. I would like to know the specific reason and whether there are any adaptation related issues. Following code: NSHTTPCookie *cookie; NSHTTPCookieStorage *storage = [NSHTTPCookieStorage sharedHTTPCookieStorage]; for (cookie in [storage cookies]) { [storage deleteCookie:cookie]; }

Hello, I have implemented a URL Filter using the sample provided here: Filtering Traffic by URL. I am also using an App Group to dynamically manage the Bloom filter and block list data. However, when I update my block list URLs and create a new Bloom filter plist in the App Group, the extension does not seem to use the updated Bloom filter even after the prefetch interval expires. Also for testing purpose can I keep this interval to 10 mins or below ?

This is a bit complicated to explain so bare with me. I am working on building an app that allows you to send real time video/camera captures from one Apple device to another. I am using a custom UDP protocol built on top of NWListener, NWBrowser, and NWConnection APIs. It works fine, but there are a few issues that seems to all be related to awdl: When transmitting via WiFi over the router (not using peer-to-peer), there are periodic interruptions when the wireless card on the device changes channels for awdl polling. This is resolved by changing the 5GHz WiFi channel on the router to channel 149 (or disabling AWDL altogether which is not really feasible). In order to work around number 1, I decided to build in an option to toggle/prefer peer-to-peer transmission in the app thinking that if everything goes over a peer-to-peer connection the jitter caused from the channel switching should go away. This also works, but with an important caveat. The default transmission is extremely choppy until you take an OS action that “elevates” the AWDL connection into “realtime” mode. I am using includePeerToPeer on the listener, browser, and connection as well as serviceClass interactiveVideo. For number 1, you can understand that asking users to change the channel on their router is not a great user experience, but the problem is the peer-to-peer connection workaround is also not great by default. For number 2, as an example of the behavior, I can send a stream from my Mac to my iPad over a peer-to-peer connection and it works but the video is very choppy until I move my cursor from my Mac to my iPad to trigger Universal Control. I captured the OS logs while doing this and can confirm that something happens to trigger “realtime” mode on the AWDL connection. After that, the streaming is totally smooth with zero latency. Some log samples: 2026-03-19 12:42:01.277968-0400 0x1ae294c Default 0x0 495 3 rapportd: (CoreUtils) [com.apple.rapport:CLinkD] Update client from UniversalControl:697 2026-03-19 12:42:01.278031-0400 0x1ae294c Default 0x0 495 0 rapportd: (CoreUtils) [com.apple.CoreUtils:AsyncCnx] CLinkCnx-6089: Connect start: 'CLink-ed3b9618b4e0._companion-link._tcp.local.%13' 2026-03-19 12:42:01.278149-0400 0x1ae294c Default 0x0 495 0 rapportd: (CoreUtils) [com.apple.CoreUtils:AsyncCnx] CLinkCnx-6089: Querying SRV CLink-ed3b9618b4e0._companion-link._tcp.local.%13 2026-03-19 12:42:01.279454-0400 0x1ae253a Info 0x0 382 0 wifip2pd: [com.apple.awdl:datapathInitiator] Created AWDLDatapathInitiator clink-ed3b9618b4e0._companion-link._tcp.local <To: 2e:f2:5a:15:76:52> 2026-03-19 12:42:01.279498-0400 0x1ae294c Default 0x0 495 0 rapportd: (CoreUtils) [com.apple.CoreUtils:AsyncCnx] CLinkCnx-6089: Resolving DNS f970afcc-1f1c-47af-a3f3-0236c9f9bbb0.local.%13 2026-03-19 12:42:01.279588-0400 0x1ae253a Default 0x0 382 0 wifip2pd: [com.apple.awdl:datapathInitiator] AWDLDatapathInitiator clink-ed3b9618b4e0._companion-link._tcp.local <To: 2e:f2:5a:15:76:52> was started 2026-03-19 12:42:01.282537-0400 0x1ae294c Default 0x0 495 0 rapportd: (Network) [com.apple.network:path] nw_path_evaluator_start [5C54D967-624D-4269-B080-6C7AE63218C7 IPv6#1e905043%awdl0.49154 generic, attribution: developer] path: satisfied (Path is satisfied), interface: awdl0[802.11], dns, uses wifi 2026-03-19 12:42:01.596450-0400 0x1ae253a Debug 0x0 382 0 wifip2pd: [com.apple.awdl:driver] Received event realtimeMode 2026-03-19 12:42:01.596589-0400 0x1ae253a Default 0x0 382 0 wifip2pd: [com.apple.awdl:interface] Realtime mode updated true I noticed that on iOS 26 and iPadOS 26 a realtime mode was added specifically to the Wi-Fi Aware API which I assume does what I want: https://aninterestingwebsite.com/documentation/wifiaware/waperformancemode/realtime, but I am looking for a solution that works with the existing network API and also on previous OS versions. I have already tried a lot of things, but is there any way to programmatically trigger “realtime” mode? For additional context, the goal here is to have extremely low latency that also works for gaming. The actual latency introduced in 1 is approximately 30-50ms around once a second… adding a buffer to the stream makes the video completely smooth, but the extra delay on the receiver end is not acceptable for this use case. Any help or ideas would be appreciated. I can’t easily share a reproduce case right now, and even if I could, getting multiple devices into the exact state along with the router configuration in order to reproduce is going to be pretty difficult anyway.

We are currently working on a zero-configuration networking compliant device thru avahi-daemon. Our Device want to have multiple Instance name for different services. Example InstanceA._ipps._tcp.local. InstanceA._ipp._tcp.local. InstanceB._ipps._tcp.local. InstanceB._ipp._tcp.local. Will BCT confuse this as multiple device connected in the network and cause it to fail? Does Bonjour only allows only a Single Instance name with multiple services?

1、已经检查过手机的存储空间，还有一百多G的空间。app端进行网络接口情况的时候报错了，报错信息如下： Error : Error Domain=NSPOSIXErrorDomain Code=28 "No space left on device" UserInfo={_NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <7DB1CBFD-B9BE-422D-9C9A-78D8FC04DC1B>.<76>, _kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=28, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <7DB1CBFD-B9BE-422D-9C9A-78D8FC04DC1B>.<76>" ), _NSURLErrorNWPathKey=satisfied (Path is satisfied), interface: pdp_ip0[lte], ipv4, ipv6, dns, expensive, estimated upload: 65536Bps, uses cell} 2、手机型号是iPhone 15 Plus，iOS 17.6.1

I am referencing: https://aninterestingwebsite.com/documentation/foundation/pausing-and-resuming-uploads Specifically: You can’t resume all uploads. The server must support the latest resumable upload protocol draft from the HTTP Working Group at the IETF. Also, uploads that use a background configuration handle resumption automatically, so manual resuming is only needed for non-background uploads. I have control over both the app and the server, and can't seem to get it to work automatically with a background url session. In other words, making multiple requests to get the offset then upload, easy but I am trying to leverage this background configuration resume OS magic. So anyone know what spec version does the server/client need to implement? The docs reference version 3, however the standard is now at like 11. Of course, I am trying out 3. Does anyone know how exactly this resume is implemented in iOS, and what exactly it takes care of? I assumed that I can just POST to a generic end point, say /files, then the OS receives a 104 Location, and saves that. If the upload is interrupted, when the OS resumes the upload, it has enough information to figure out how to resume from the exact offset, either by making a HEAD request to get the offset, or handle a 409. I am assuming it does this, as if it doesn't, the 'uploads that use a background configuration handle resumption automatically' is useless, if it just restarts from 0. Note, of course making individual POST/HEAD/PATCH requests manually works, but at that point I'm not really leveraging any OS auto-magic, and am just consuming an API that could really implement any spec. This won't work in the background, as the OS seems to disallow random HTTP requests when it wakes the app for URLSession background resumes. As of right now, I have it 'partially' working, insofar as the app does receive the 104 didReceiveInformationalResponse url delegate call, however it seems to then hang; it stops sending bytes, seemingly when the 104 is received. However, the request does not complete. In other words, it doesn't seem to receive a client timeout or otherwise indicate the request has finished. Right now, I am starting a single request, POSTing to a /files end point, i.e. I am not getting the location first, then PATCHing to that, as if I do that, the OS 'automatic' resuming fails with a 409, i.e. it doesn't seem to make a HEAD request and/or use the 409 offset correction then continue with the PATCH. Any idea what could be going on?

Hey there Are there any recommendations or guidance for apps on alternatives to certificate pinning to secure their device network traffic? I want to move away from the overhead and risk associated with rotating certificates when using leaf pinning. However, I also don't want people to be able to perform a MITM attack easily using something like Charles Proxy with a self‑signed certificate added to the trust store. My understanding is that an app cannot distinguish between user‑trusted certificates and system‑trusted certificates in the trust store, so it cannot block traffic that uses user‑trusted certificates.

For Local network access, Chrome prompts the user to allow access and adds it to Settings --> Privacy & Security --> Local Network. However, for Safari, no prompt appears. How do I force Safari to authorise these local network access requests if it won't trigger the permission dialogue? Is there a specific WKWebView configuration or Safari-specific header required to satisfy this security check?

I develop a Network Extension with NEFilterDataProvider and want to understand how to stop or disable it on exit of the base app without deactivating NE from OS and leave ability to start it again without requiring a password from the user. It starts normally, but when I try to disable it: NEFilterManager.sharedManager.enabled = NO; [NEFilterManager.sharedManager saveToPreferencesWithCompletionHandler:^(NSError * _Nullable error) { // never called }]; the completion handler has never called. But stopFilterWithReason inside the NE code called by the framework where I only replay with required completionHandler();. Then NE process keeps alive. I also tried to call remove, which should disable NE: [NEFilterManager.sharedManager removeFromPreferencesWithCompletionHandler:^(NSError * _Nullable error) { // never called }]; with same result - I freeze forever on waiting completion handler. So what is the correct way to disable NE without explicit deactivation it by [OSSystemExtensionRequest deactivationRequestForExtension:...]?

HI, I am currently developing an app that utilizes Wi-Fi Aware. According to the Wi-Fi Aware framework examples and the WWDC25 session on Wi-Fi Aware, discovery is handled using DevicePairingView and DevicePicker from the DeviceDiscoveryUI module. However, these SwiftUI views present their connection UI modally when tapped. My app's design requires the ability to control the presentation of this UI programmatically, rather than relying on a user tap. While inspecting the DeviceDiscoveryUI module, I found DDDevicePairingViewController and DDDevicePickerViewController, which appear to be the UIViewController counterparts to the SwiftUI views. The initializer for DDDevicePairingViewController accepts a ListenerProvider, so it seems I can pass the same ListenerProvider instance that is used with the DevicePairingView. However, the initializer for DDDevicePickerViewController requires an NWBrowser.Descriptor, which seems incompatible with the parameters used for the SwiftUI DevicePicker. I have two main questions: (1) Can DDDevicePairingViewController and DDDevicePickerViewController be officially used for Wi-Fi Aware pairing? (2) Are there any plans to provide more customization or programmatic control over the DevicePairingView and DevicePicker (for example, allowing us to trigger their modal presentation programmatically)? Thank you.

Hi all, I work on a smart product that, for setup, uses a captive portal to allow users to connect and configure the device. It emits a WiFi network and runs a captive portal - an HTTP server operates at 10.0.0.1, and a DNS server responds to all requests with 10.0.0.1 to direct "any and all" request to the server. When iOS devices connect, they send a request to captive.apple.com/hotspot-detect.html; if it returns success, that means they're on the internet; if not, the typical behavior in the past has been to assume you're connected to a captive portal and display what's being served. I serve any requests to /hotspot-detect.html with my captive portal page (index.html). This has worked reliably on iOS18 for a long time (user selects my products WiFi network, iOS detects portal and opens it). But almost everyone who's now trying with iOS26 is having the "automatic pop up" behavior fail - usually it says "Error opening page - Hotspot login cannot open the page because the network connection was lost." However, if opening safari and navigating to any URL (or 10.0.0.1) the portal loads - it's just the iOS auto-detect and open that's not working iOS18 always succeeds; iOS26 always fails. Anybody have any idea what changes may have been introduced in iOS26 on this front, or anything I can do to help prompt or coax iOS26 into loading the portal? It typically starts reading, but then stops mid-read.

I need to know the https address of a certain page within my app. This is going to be used as a redirect URL. I don't think it is a good idea to use deep links because it has to be an https address. I don't think Universal Links will work because it is not my website that I will be communicating with.

After dropping an A-record TTL to 60 secs (it was previously no higher than 600 secs for several weeks) and making an IP change for a small business website on Monday, I took down the old web service just over 24 hours later on Tuesday evening. We then had reports of some customers not being able to access the website on Wednesday morning. On investigation using my iPhone it would appear that Apple Private Relay is still directing clients to the old IP address. It's just as well I have iCloud+ as I would never have seen this issue otherwise and would have been none the wiser as to why some customers were having problems. Has anyone else seen this and/or have a fix other than waiting longer? Do you know how long it takes for Apple Private Relay to update? This isn't expected behaviour of DNS? I spoke to someone at Apple yesterday and there wasn't much they can do. I hope they're escalating internally as almost 3 days later it's still pointing users to the old IP address despite having ample time for proper DNS propagation.

I've submitted a couple of pieces of feedback regarding broken WPA3 support on iOS 26 for the iPhone 17 Pro Max, and I've seen various access point vendors report that the GCMP256 cypher is not working. If you use WPA2, there is no issue. The problem I'm running into comes down to WPA3 being mandatory on 6 GHz. Some vendors have reported that disabling GCMP256 on Cisco Meraki hardware solves the problem. No other major vendor exposes this level of options. Does anyone know if it's possible to get more verbose diagnostic information out of the WiFi stack? I need actual information about why the negotiation fails, the technician-level stuff.

I am seeing an issue with NETransparentProxyProvider where the extension successfully transitions from sleep to wake, but stops receiving handleNewFlow(_:) calls. Only below two methods gets called, We don't apply rules in these methods: override func wake() override func sleep(completionHandler: @escaping () -> Void) This breaking complete proxy workflow as it stops intercepting traffics. We are not observing this issues always. FYI: com.apple.developer.endpoint-security.client is not present in .entitlement file. I am not sure adding this will help. Any possibilities nesessionmanager might fail to re-bind the traffic rules for this extensions? Any thing we can do to avoid this issues?

Error 8 in the NEHotspotConfigurationError domain is .internal, aka NEHotspotConfigurationErrorInternal. This error typically indicates that something went wrong in some sort of expected way, but we decided not to surface the exact cause [1]. This has come up a bunch of times before on the forums, and I have various titbits to share. To start, I want to address some specific cases: You’ll see this error if your app isn’t signed with the com.apple.developer.networking.HotspotConfiguration entitlement. To fix this, use Xcode’s Signing & Capabilities editor to add the Hotspot capability to your app. Historically developers reported a situation where once they encountered the error it would show up consistently, but then it would go away on restarting the device. If you see behaviour like that, that’s definitely a bug and I encourage you to file it as such. I have more about filing such bugs in Filing a Wi-Fi Bug Report. Of course, you have to wait to reproduce the error again before you’ll be able to file that bug, because the act of restarting cleared the issue. I’ve seen reports where such problems only occur on a specific type of device, for example, on iPhone 16 but not on earlier or later iPhones. That’s definitely something that Apple should investigate, and I recommend that you file a bug about it. If the problem is being reported by your users but you can’t reproduce it yourself, consider the various suggestions in Using a Sysdiagnose Log to Debug a Hard-to-Reproduce Problem. Assuming you’re still here (-: the next step is to determine whether the problem is specific to NEHotspotConfigurationManager or not. Try joining the accessory’s network from Settings > Wi-Fi. Does that also have problems? If so, that’s not something we can help you with here on the forums. The focus of the Apple Developer Forums is primarily to help developers with the APIs in Apple’s various platform SDKs [2]. We’re not set up to help accessory developers with Wi-Fi issues. However, there are still things you can do, as I explain in Filing a Wi-Fi Bug Report. At this point you have an error that: Persists across restarts Happens with all Apple devices You can reproduce Only affects NEHotspotConfigurationManager If that’s correct then there are a couple of things you might look at: Coerce the error to an NSError and print that. Does it reveal anything interesting? Also check the underlying error property (NSUnderlyingErrorKey) for hints. When reproducing the error, monitor the system log for log entries in the com.apple.networkextension subsystem. Do those offer any clues? Note For lots of hints and tips about the system log, see Your Friend the System Log. And finally, if you have questions about this case, feel free to start a thread here on the forums and we’ll try to help you out. Put it in the App & System Services > Networking subtopic and tag it with Network Extension. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] There’s also the .unknown error. See this post for a brief summary of the difference. [2] And with Apple tools and some developer-oriented services. Revision History 2026-03-18 Added a missing entitlement bullet to the specific case list. 2026-03-17 First posted.