I’m working on an iOS parental-control app that needs to block specific network traffic (e.g. certain domains or URLs). We’ve already obtained the Family Controls entitlement (since our app is explicitly a parental-control solution), but we do not use MDM to supervise devices. In testing, our NEFilterDataProvider extension only activates when the device is enrolled under a managed Family Controls profile. I am aware that we can use a PacketTunnel to achieve this but i was wondering if there is any simpler solution to this? Thanks for you time!

Hello, A quick background: I am developing an App that receives a data stream from a device through its Wi-Fi network. The device itself is not connected to the internet, so the app won't be either. Now, I am adding a new feature to the App that would require internet connection during the data stream. Consequently, my users would need to use their cellular data. On later versions of iPhone, the phone would occasionally detect the lack of internet connection and asks the user via a pop-up if they want to use their cellular data. However, this behavior is not consistent. So my question is- can we programmatically invoke this pop-up so the user can connect to the internet? Or even better- can we program the App to use cellular data while still being connected to a Wi-Fi network? Note: I have seen mixed answers on the internet whether this is doable or not, and I know that users are able do it themselves by manually configuring their IP in their WiFi settings page, but I doubt this operation can be done through the App for security reasons. Thanks!

I’m building a macOS app with a DNS Proxy system extension for Developer ID + notarization, deployed via MDM, and Xcode fails the Developer ID Release build with a provisioning profile mismatch for com.apple.developer.networking.networkextension. Environment macOS: Sequoia (15.7.2) Xcode: 26.2 Distribution: Developer ID + notarization, deployed via MDM Host bundle ID: com.mydns.agent.MyDNSMacProxy DNS Proxy system extension bundle ID: com.mydns.agent.MyDNSMacProxy.dnsProxy Host entitlements (Release): File: MyDNSMacProxy/MyDNSMacProxyRelease.entitlements: "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.application-identifier</key> <string>B234657989.com.mydns.agent.MyDNSMacProxy</string> <key>com.apple.developer.networking.networkextension</key> <array> <string>dns-proxy</string> </array> <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.developer.team-identifier</key> <string>B234657989</string> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.application-groups</key> <array> <string>group.com.mydns.MyDNSmac</string> </array> <key>keychain-access-groups</key> <array> <string>B234657989.*</string> </array> </dict> </plist> xcodebuild -showBuildSettings -scheme MyDNSMacProxy -configuration Release : PROVISIONING_PROFILE_SPECIFIER = main MyDNSMacProxy5 CODE_SIGN_IDENTITY = Developer ID Application Host Developer ID profile main_MyDNSMacProxy5.provisionprofile (via security cms -D): "Entitlements" => { "com.apple.application-identifier" => "B234657989.com.mydns.agent.MyDNSMacProxy" "com.apple.developer.team-identifier" => "B234657989" "com.apple.security.application-groups" => [ "group.com.mydns.MyDNSmac", ..., "B234657989.*" ] "keychain-access-groups" => [ "B234657989.*" ] "com.apple.developer.system-extension.install" => 1 "com.apple.developer.networking.networkextension" => [ "packet-tunnel-provider-systemextension", "app-proxy-provider-systemextension", "content-filter-provider-systemextension", "dns-proxy-systemextension", "dns-settings", "relay", "url-filter-provider", "hotspot-provider" ] } So: App ID, team ID, keychain and system‑extension.install match. The profile’s com.apple.developer.networking.networkextension is a superset of what I request in the host entitlements (dns-proxy only). System extension (for context) DNS Proxy system extension target: NSExtensionPointIdentifier = com.apple.dns-proxy NetworkExtension → NEProviderClasses → com.apple.networkextension.dns-proxy → my provider class Entitlements: com.apple.developer.networking.networkextension = ["dns-proxy-systemextension"] This target uses a separate Developer ID profile and builds successfully. Xcode error Release build of the host fails with: …MyDNSMacProxy.xcodeproj: error: Provisioning profile "main MyDNSMacProxy5" doesn't match the entitlements file's value for the com.apple.developer.networking.networkextension entitlement. (in target 'MyDNSMacProxy' from project 'MyDNSMacProxy') Xcode UI also says: Entitlements: 6 Included, 1 Missing Includes com.apple.developer.team-identifier, com.apple.application-identifier, keychain-access-groups, com.apple.developer.system-extension.install, and com.apple.security.application-groups. Doesn’t match entitlements file value for com.apple.developer.networking.networkextension. Because of this, the app bundle isn’t produced and I can’t inspect the final signed entitlements. Questions: For com.apple.developer.networking.networkextension, should Xcode accept a subset of values in the entitlements (here just dns-proxy) as long as that value is allowed by the Developer ID profile, or does it currently require a stricter match? Is the following configuration valid for Developer ID + MDM with a DNS Proxy system extension: Host entitlements: ["dns-proxy"] System extension entitlements: ["dns-proxy-systemextension"] Host profile’s NE array includes the DNS Proxy system extension types. If this is a known limitation or bug in how Xcode validates NE entitlements for Developer ID, is there a recommended workaround? Thanks for any guidance.

send a request and it returns with timeout Integration Team are Using Fortigate as a firewall and NGINX for some reasons so we use VPN TO Access , requests always succeed but at once it failed with timeout in randomize request not specific one we are using URLSession as a network layer when I retry the same failed request again, it success the request cannot connect apigee Sec Team concern { app session hits the security gateway with lots of SYN step to try to initiate a new session and doesn’t wait for (SYN-ACK / ACK) steps to happen to make sure the connection initiated correctly and gateway consider it flooding attack }

Hi, I tried to follow this guide: https://aninterestingwebsite.com/documentation/networkextension/filtering-traffic-by-url And this: https://github.com/apple/pir-service-example I already deploy the pir service on my server. And set the configuration on the app like this: { name = SimpleURLFilter identifier = xxxxx applicationName = SimpleURLFilter application = com.xxxx.SimpleURLFilter grade = 2 urlFilter = { Enabled = YES FailClosed = NO AppBundleIdentifier = com.mastersystem.SimpleURLFilter ControlProviderBundleIdentifier = com.xxxx.SimpleURLFilter.SimpleURLFilterExtension PrefilterFetchFrequency = 2700 pirServerURL = https://xxxxx/pir pirPrivacyPassIssuerURL = https://xxxxx/pir AuthenticationToken = AAAA pirPrivacyProxyFailOpen = NO pirSkipRegistration = NO } } But I got this error when I tried to enable the service on the app: Received filter status change: <FilterStatus: 'stopped' errorMessage: 'The operation couldn’t be completed. (NetworkExtension.NEURLFilterManager.Error error 9.)'> What does that error mean? And how to fix it?

I have been toying around with the URL filter API, and now a few installed configurations have piled up. I can't seem to remove them. I swear a few betas ago I could tap on one and then delete it. But now no tap, swipe, or long press does anything. Is this a bug?

Hi! I recently had an idea to build an iOS app that allows users to create a system-level block of specified web domains by curating a "blacklist" on their device. If the user, for instance, inputs "*example.com" to their list, their iPhone would be blocked from relaying that network traffic to their ISP/DNS, and hence return an error message ("iPhone can't open the page because the address is invalid") instead of successfully fetching the response from example.com's servers. The overarching goal of this app would be to allow users to time-block their use of specified websites/apps and grant them greater agency over their technology consumption, and I thought that an app that blocks traffic at the network level, combined with the ability to control when to/not to allow access, would be a powerful alternative to the existing implementations out there that work more on the browser-level (eg. via Safari extension, which is isolated to the scope of user's Safari browser) or via Screen Time (which can be easy to bypass by inputting one's passcode). Another thing to mention is that since the app would serve as a local DNS proxy (instead of relying on a third party DNS resolver), none of their internet activity will be collected/transmitted off-device and be used for commercial purposes. I feel particularly driven to create a privacy-centered app in this way, since no user data needs to be harvested to implement this kind of filtering. I'd also love to get suggestions for a transparent privacy policy that respects users control over their device. With all this said, I found that the Network Extension APIs may be the only way that an app like this could be built on iOS and, I wanted to ask if the above-mentioned use case of Network Extension would be eligible to be granted access to its entitlement before I go ahead and purchase the $99/year Apple Developer Program membership. Happy to provide further information, and I'd also particularly be open to any mentions of existing solutions out there (since I might have missed some in my search). Maybe something like this already exists, in which case it'd be great to know in any case! :). Thank you so much in advance!

Hello, I am new to App development, so I am looking for some advice. I want to develop an app for iPhone, which downloads files (pdf, jpg)from a server to the local storage. I also want to get data from the server to be used in my app. This could be a database access or just simple xml files. I want a secure access based on userid and password. Since in a later version, my app should also run on Android Phones, I am reluctant to use iCloud. I was thinking sftp, but that does not seem to be supported for iOS.

If the includeAllNetworks flag to true, we cannot update our app via Xcode, TestFlight or the AppStore. In the AppStore and TestFlight cases, it seems that the packet tunnel process is stopped before the new app is downloaded - once the packet tunnel process is stopped, it can’t be started again via Settings/VPN profiles, nor can it be started via the app.

Description I am seeing a consistent crash in a NEDNSProxyProvider on iOS when migrating from completion handlers to the new Swift Concurrency async/await variants of readDatagrams() and writeDatagrams() on NEAppProxyUDPFlow. The crash occurs inside the Swift Concurrency runtime during task resumption. Specifically, it seems the Task attempts to return to the flow’s internal serial executor (NEFlow queue) after a suspension point, but fails if the flow was invalidated or deallocated by the kernel while the task was suspended. Error Signature Thread 4: EXC_BAD_ACCESS (code=1, address=0x28) Thread 4 Queue : NEFlow queue (serial) #0 0x000000018fe919cc in swift::AsyncTask::flagAsAndEnqueueOnExecutor () #9 0x00000001ee25c3b8 in _pthread_wqthread () Steps The crash is highly timing-dependent. To reproduce it reliably: Use an iOS device with Developer Settings enabled. Go to Developer > Network Link Conditioner -> High Latency DNS. Intercept a DNS query and perform a DoH (DNS-over-HTTPS) request using URLSession. The first few network requests should trigger the crash Minimum Working Example (MWE) class DNSProxyProvider: NEDNSProxyProvider { override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool { guard let udpFlow = flow as? NEAppProxyUDPFlow else { return false } Task(priority: .userInitiated) { await handleUDPFlow(udpFlow) } return true } func handleUDPFlow(_ flow: NEAppProxyUDPFlow) async { do { try await flow.open(withLocalFlowEndpoint: nil) while !Task.isCancelled { // Suspension point 1: Waiting for datagrams let (flowData, error) = await flow.readDatagrams() if let error { throw error } guard let flowData, !flowData.isEmpty else { return } var responses: [(Data, Network.NWEndpoint)] = [] for (data, endpoint) in flowData { // Suspension point 2: External DoH resolution let response = try await resolveViaDoH(data) responses.append((response, endpoint)) } // Suspension point 3: Writing back to the flow // Extension will crash here on task resumption try await flow.writeDatagrams(responses) } } catch { flow.closeReadWithError(error) flow.closeWriteWithError(error) } } private func handleFlowData(_ packet: Data, endpoint: Network.NWEndpoint, using parameters: NWParameters) async throws -> Data { let url = URL(string: "https://dns.google/dns-query")! var request = URLRequest(url: url) request.httpMethod = "POST" request.httpBody = packet request.setValue("application/dns-message", forHTTPHeaderField: "Content-Type") let (data, _) = try await URLSession.shared.data(for: request) return data } } Crash Details & Analysis The disassembly at the crash point indicates a null dereference of an internal executor pointer (Voucher context): ldr x20, [TPIDRRO_EL0 + 0x340] ldr x0, [x20, #0x28] // x20 is NULL/0x0 here, resulting in address 0x28 It appears that NEAppProxyUDPFlow’s async methods bind the Task to a specific internal executor. When the kernel reclaims the flow memory, the pointer in x20 becomes invalid. Because the Swift runtime is unaware that the NEFlow queue executor has vanished, it attempts to resume on non-existing flow and then crashes. Checking !Task.isCancelled does not prevent this, as the crash happens during the transition into the task body before the cancellation check can even run. Questions Is this a known issue of the NetworkExtension async bridge? Why does Task.isCancelled not reflect the deallocation of the underlying NEAppProxyFlow? Is the only safe workaround? Please feel free to correct me if I misunderstood anything here. I'll be happy to hear any insights or suggestions :) Thank you!

Feedback Ticket: FB13812251 Problem Statement: We are currently facing internet connectivity issue with our VPN application where we try to disconnect the VPN from the Packet Tunnel Network Extension using - (void)cancelTunnelWithError:(nullable NSError *)error. Which API to use to disconnect the VPN from Packet Tunnel as VPN app is not running such that device retains its internet connectivity as soon as VPN disconnects. Configuration: We have configured PacketTunnelProvider with the following settings: (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.includeAllNetworks = YES; (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.excludeLocalNetworks = NO; (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.enforceRoutes = NO; These settings are applied from the VPN app and allow us to successfully establish a VPN connection, with all traffic being routed through the tunnel as expected.We are setting above properties to address local net attack. Issue we are facing: However, we encounter a problem when we attempt to disconnect the VPN from. When we call the following method from PacketTunnel network extension: (void)cancelTunnelWithError:(nullable NSError *)error Upon calling this method, the VPN disconnects as expected, but the device loses all internet connectivity and is unable to access any resources. This is not the desired behavior. Observation : Interestingly, when we call the following method from the app side. The VPN disconnects and the device retains its internet connectivity. [enabledConfig.connection stopVPNTunnel]; We would like to achieve the same behavior when disconnecting the VPN from the Network Extension. So we are looking for an API that could be called from NE without causing any internet connectivity issue. Any guidance on how to resolve this issue would be greatly appreciated.

Hi all, We've been exploring the capabilities of the Network.framework for peer-to-peer communication and have run into some behavior that we haven't been able to fully explain with the existing documentation. In our tests, we’re working with 12 iOS devices, all disconnected from Wi-Fi to force communication over Apple Wireless Direct Link (AWDL). While using the Network.framework to create peer-to-peer connections, we observed that the number of connected peers never exceeded 8, despite all 12 devices being active and configured identically. Some questions we’re hoping to get clarification or discussion on: Is there a known upper limit to the number of peer-to-peer connections supported via AWDL? Are there conditions under which the framework or system limits or throttles visible peers? Does AWDL behavior vary by hardware model, iOS version, or backgrounding state of the app? Is there any official documentation or guidance around peer discovery or connection limits when using NWBrowser and NWConnection in a peer-to-peer context? We’d appreciate any insights from the Apple engineering team or other developers who have worked with larger peer groups using Network.framework in peer-to-peer mode.

Hi there, How can I best understand the changes on the eSIM Installation wizard, i.e. on iOS 18 and later after an eSIM installation you used to get steps such as labeling the eSIM, deciding what to use for iMessage & FaceTime, what to use for mobile data, main voice line, etc. Whereas on iOS 26 you are not prompted for these steps.

I’m trying to use the TLS Session Resumption feature in TLS 1.2 and 1.3. I first tested this on iOS, but it didn’t work as expected. To investigate via packet capture, I ran the same code on macOS and saw the same issue. Using URLSession to establish a WebSocket connection, I captured packets in Wireshark to check if Session Resumption was working. The behavior differed from what I expected: 1st TLS handshake – Client Hello does not contain the session_ticket extension (required for session resumption per the TLS spec). 2nd TLS handshake – Client Hello does not contain a pre_shared_key. Test apps: https://github.com/sf-jed-kyung/tls-session-resumption-test Test environment: Xcode 16.3, macOS 15.6, OpenSSL 3.5.1 This repo contains: tls-urlsession-macos – WebSocket via URLSession (shows missing extensions). tls-openssl-macos – Manual TLS handshake via OpenSSL (shows both session_ticket and pre_shared_key). To run this, adjust Header Search Paths and Library Search Paths for your local OpenSSL install. URLSession – 1st Client Hello Transport Layer Security TLSv1.3 Record Layer: Handshake Protocol: Client Hello Content Type: Handshake (22) Version: TLS 1.0 (0x0301) Length: 512 Handshake Protocol: Client Hello Handshake Type: Client Hello (1) Length: 508 Version: TLS 1.2 (0x0303) Random: 0502b10cf04223658... Session ID Length: 32 Session ID: e3b276b14f2deaced... Cipher Suites Length: 42 Cipher Suites (21 suites) Compression Methods Length: 1 Compression Methods (1 method) Extensions Length: 393 ... Extension: server_name (len=26) name=echo.websocket.events Extension: extended_master_secret (len=0) Extension: renegotiation_info (len=1) Extension: supported_groups (len=12) Extension: ec_point_formats (len=2) Extension: application_layer_protocol_negotiation (len=11) Extension: status_request (len=5) Extension: signature_algorithms (len=22) Extension: signed_certificate_timestamp (len=0) Extension: key_share (len=43) x25519 Extension: psk_key_exchange_modes (len=2) Extension: supported_versions (len=7) TLS 1.3, TLS 1.2 Extension: compress_certificate (len=3) ... URLSession – 2nd Client Hello Transport Layer Security TLSv1.3 Record Layer: Handshake Protocol: Client Hello Content Type: Handshake (22) Version: TLS 1.0 (0x0301) Length: 512 Handshake Protocol: Client Hello Handshake Type: Client Hello (1) Length: 508 Version: TLS 1.2 (0x0303) Random: 1e485f35ad66c8598... Session ID Length: 32 Session ID: 99d02000c7ed403a5... Cipher Suites Length: 42 Cipher Suites (21 suites) Compression Methods Length: 1 Compression Methods (1 method) Extensions Length: 393 ... Extension: server_name (len=26) name=echo.websocket.events Extension: extended_master_secret (len=0) Extension: renegotiation_info (len=1) Extension: supported_groups (len=12) Extension: ec_point_formats (len=2) Extension: application_layer_protocol_negotiation (len=11) Extension: status_request (len=5) Extension: signature_algorithms (len=22) Extension: signed_certificate_timestamp (len=0) Extension: key_share (len=43) x25519 Extension: psk_key_exchange_modes (len=2) Extension: supported_versions (len=7) TLS 1.3, TLS 1.2 Extension: compress_certificate (len=3) ... OpenSSL – 1st Client Hello Transport Layer Security TLSv1.3 Record Layer: Handshake Protocol: Client Hello Content Type: Handshake (22) Version: TLS 1.0 (0x0301) Length: 1564 Handshake Protocol: Client Hello Handshake Type: Client Hello (1) Length: 1560 Version: TLS 1.2 (0x0303) Random: aec30b0aad542252... Session ID Length: 32 Session ID: f7ee7178cab8716a625... Cipher Suites Length: 60 Cipher Suites (30 suites) Compression Methods Length: 1 Compression Methods (1 method) Extensions Length: 1427 Extension: renegotiation_info (len=1) Extension: server_name (len=26) name=echo.websocket.events Extension: ec_point_formats (len=4) Extension: supported_groups (len=18) Extension: session_ticket (len=0) Extension: application_layer_protocol_negotiation (len=11) Extension: encrypt_then_mac (len=0) Extension: extended_master_secret (len=0) Extension: signature_algorithms (len=54) Extension: supported_versions (len=5) TLS 1.3, TLS 1.2 Extension: psk_key_exchange_modes (len=2) Extension: key_share (len=1258) X25519MLKEM768, x25519 OpenSSL – 2nd Client Hello Transport Layer Security TLSv1.3 Record Layer: Handshake Protocol: Client Hello Content Type: Handshake (22) Version: TLS 1.0 (0x0301) Length: 1716 Handshake Protocol: Client Hello Handshake Type: Client Hello (1) Length: 1712 Version: TLS 1.2 (0x0303) Random: 3fb3938a88166e4eb... Session ID Length: 32 Session ID: 7f13e54a231c17ccff70... Cipher Suites Length: 60 Cipher Suites (30 suites) Compression Methods Length: 1 Compression Methods (1 method) Extensions Length: 1579 Extension: renegotiation_info (len=1) Extension: server_name (len=26) name=echo.websocket.events Extension: ec_point_formats (len=4) Extension: supported_groups (len=18) Extension: session_ticket (len=0) Extension: application_layer_protocol_negotiation (len=11) Extension: encrypt_then_mac (len=0) Extension: extended_master_secret (len=0) Extension: signature_algorithms (len=54) Extension: supported_versions (len=5) TLS 1.3, TLS 1.2 Extension: psk_key_exchange_modes (len=2) Extension: key_share (len=1258) X25519MLKEM768, x25519 Extension: pre_shared_key (len=148) Since the Client Hello is generated by the client, I believe the session_ticket should be included in the first handshake regardless of server support. However, URLSession omits it entirely. Question: How can I enable TLS Session Resumption when using URLSession?

Samsung's Quick Share uses Wi-Fi Aware to achieve one-to-many concurrent sharing. Can Apple's Wi-Fi Aware achieve one-to-many concurrent sharing? Apple's AirDrop does support one-to-many concurrent sharing.

how can I prevent handshake when certificate is user installed for example if user is using Proxyman or Charles proxy and they install their own certificates now system is trusting those certificates I wanna prevent that, and exclude those certificates that are installed by user, and accept the handshake if CA certificate is in a real valid certificate defined in OS I know this can be done in android by setting something like <network-security-config> <base-config> <trust-anchors> <certificates src="system" /> </trust-anchors> </base-config> </network-security-config>

Hello everyone, I'm developing a macOS application with an integrated Content Filter System Extension. Both the main app and the extension are signed with a Developer ID Application provisioning profile. When building in Xcode, I'm encountering an entitlement mismatch error. I've inspected the provisioning profile using the command: security cms -D -i FilterContentExtension-prod-profile.provisionprofile | grep -A 10 com.apple.developer.networking.networkextension And found that the com.apple.developer.networking.networkextension section only contains values with the -systemextension suffix, for example: content-filter-provider-systemextension. However, when I enable Network Extension → Content Filter in Xcode, the .entitlements file is generated with: content-filter-provider. This leads to the error: "Provisioning profile 'FilterContentExtension-prod-profile' doesn't match the entitlements file’s value for the com.apple.developer.networking.networkextension entitlement." My specific questions are: Why does this error occur? How can I use the content-filter-provider entitlement? If I want to use the content-filter-provider entitlement inside com.apple.developer.networking.networkextension for my Content Filter System Extension, what should I do?

As part of the OpenJDK testing we run several regression tests, including for Java SE networking APIs. These APIs ultimately end up calling BSD socket functions. On macos, starting macos 26, including on recent 26.2 version, we have started seeing some unexplained but consistent exception from one of these BSD socket APIs. We receive a "ENOBUFS" errno (No buffer space available) when trying to construct a socket(). These exact same tests continue to pass on many other older versions of macos (including 15.7.x). After looking into this more, we have been able to narrow this down to a very trivial C code which is as follows (also attached): #include <stdio.h> #include <sys/socket.h> #include <string.h> #include <unistd.h> #include <sys/errno.h> static int create_socket(const int attempt_number) { const int fd = socket(AF_INET6, SOCK_STREAM, 0); if (fd < 0) { fprintf(stderr, "socket creation failed on attempt %d," " due to: %s\n", attempt_number, strerror(errno)); return fd; } return fd; } int main() { const unsigned int num_times = 250000; for (unsigned int i = 1; i <= num_times; i++) { const int fd = create_socket(i); if (fd < 0) { return -1; } close(fd); } fprintf(stderr, "successfully created and closed %d sockets\n", num_times); } The code very trivially creates a socket() and close()s it. It does this repeatedly in a loop for a certain number of iterations. Compiling this as: clang sockbufspaceerr.c -o sockbufspaceerr.o and running it as: ./sockbufspaceerr.o consistently generates an error as follows on macos 26.x: socket creation failed on attempt 160995, due to: No buffer space available The iteration number on which the socket() creation fails varies, but the issue does reproduce. Running the same on older versions of macos doesn't reproduce the issue and the program terminates normally after those many iterations. Looking at the xnu source that is made available for each macos release here https://opensource.apple.com/releases/, I see that for macos 26.x there have been changes in this kernel code and there appears to be some kind of memory accountability code introduced in this code path. However, looking at the reproducer/application code in question, I believe it uses the right set of functions to both create as well as release the resources, so I can't see why this should cause the above error in macos 26.x. Does this look like some issue that needs attention in the macos kernel and should I report it through feedback assitant tool?

We have an application which is written in Swift, which activates Transparent Proxy network extension. Our Transparent Proxy module is a system extension, which is exposing an app proxy provider interface (We are using NETransparentProxyProvider class and in extension’s Info.plist we use com.apple.networkextension.app-proxy key.) Sometimes we have observed that on starting the transparent proxy extension, the startProxy overridden delegate method(override func startProxy(options: [String : Any]?, completionHandler: @escaping (Error?) -> Void) {) in our AppProxyProvider class which is derived from NETransparentProxyProvider being called more than once for the same extension(pid). This leads to Over-resume of an object crash as we invoke setTunnelNetworkSettings inside the startProxy delegate. As this is controlled by the system, we are not sure why this delegate being called more than once sometimes even if we call the start TransparentProxy only once. Note that, this issue is seen only in Mac OS Tahoe. Apple Feedback ticket: FB21464147 (startProxy delegate for NETransparentProxyProvider class is being called twice for the same pid extension sometimes)

Hello team, I am developing a security app where I am denying certain flows/packets if the are communicating with known malicious endpoints. Therefore I want to make use of NetworkExtensions such as the new URLFilter or ContentFilter (NEURLFilterManager, NEFilterDataProvider, NEFilterControlProvider). Does NEURLFilterManager require the user's device to be at a minimun of ios 26? Does any of these APIs/Extensions require the device to be managed/supervised or can it be released to all consumers? Thanks,