Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

DeviceActivityMonitor extension intervalDidStart never called on iOS 26.3.1
Similar Issue to FB13556935: On iOS 26.3.1, deviceactivityd produces zero log output and never wakes a DeviceActivityMonitor extension at the scheduled time, even when the schedule is successfully registered. The extension's intervalDidStart(for:) method is never called. Steps to Reproduce: Create an app with a DeviceActivityMonitor extension subclass Add the com.apple.developer.family-controls entitlement to both the main app and extension targets Add a shared App Group entitlement to both targets In the main app, call: let center = DeviceActivityCenter() center.stopMonitoring([.myActivity]) let schedule = DeviceActivitySchedule( intervalStart: DateComponents(hour: 17, minute: 30), intervalEnd: DateComponents(hour: 17, minute: 45), repeats: true ) try center.startMonitoring(.myActivity, during: schedule) Verify registration succeeds: DeviceActivityCenter().activities.contains(.myActivity) returns true Background the app completely and wait for the intervalStart time (5:30 PM in this example) Expected Result: intervalDidStart(for:) is called in the extension process at 5:30 PM. ManagedSettings shields are applied without any user interaction. Actual Result: intervalDidStart(for:) is never called. No extension process is launched. Filtering Console.app for deviceactivityd on the device returns 0 messages — the daemon produces no logs whatsoever despite an active registered schedule. Shields are never applied. Additional Evidence: Third-party apps using DeviceActivity (e.g. Prayer Lock) successfully apply shields at scheduled times on the same device and OS version, confirming the framework is not universally broken Filtering Console.app for the app's bundle ID at the trigger time shows the main app process applying shields via a UNCalendarNotificationTrigger fallback — but no extension process activity DeviceActivityCenter().activities correctly lists the registered activity before and after the trigger time, confirming the schedule registration API is functional Environment: iOS 26.3.1 Physical device (required for FamilyControls) Development-signed build with com.apple.developer.family-controls entitlement provisioned App Group shared between main app and extension targets
0
1
75
3w
Apple Media Service T&C pop-up
I had published an App which App Clip is supported. I have receipt complaints from user where the user will keep showing the "Apple Media Services Terms and Conditions Have Changed" right after user click on the "Open" button in the App Clips. What I had tried: Let user switch the current logged in Apple Id region to one of our support region. Log out and log in with an Apple Id which had no issue.
0
1
99
Jan ’26
Clarification on AskCenter and Age Assurance APIs for Texas Regulatory Compliance
Hello, I’m currently reviewing and implementing age assurance and parental approval flows using AgeRangeService and PermissionKit (AskCenter) in the context of Texas regulatory compliance requirements. While the high-level APIs are clear, there are several technical aspects where the intended usage patterns are not fully explicit in the documentation. Clarification on these points would help ensure our implementation aligns with system expectations and regulatory obligations. ⸻ Querying the current approval state for SignificantAppUpdateTopic AskCenter.ask(...) returns Void, and AskCenter.responses(for:) provides an AsyncSequence of approval events. Is there an official or recommended way to determine whether a SignificantAppUpdateTopic has already been approved when the app launches, or is listening for future responses events the only supported mechanism? ⸻ Behavior of AskCenter.responses(for:) regarding past approvals When subscribing to AskCenter.responses(for:): • Does the stream replay previously recorded approval or decline decisions? • Or does it only emit events that occur after subscription? This affects whether the listener must be registered early in the app lifecycle. ⸻ Recommended lifecycle timing for registering a responses(for:) listener What is the intended or recommended time to register a responses(for:) listener? • At application launch • Immediately before calling ask(...) • When entering a specific gated feature Clarification on the expected lifecycle usage would be helpful. ⸻ Repeated calls to ask(...) after approval If AskCenter.ask(...) is called again for the same SignificantAppUpdateTopic after parental approval has already been granted: • Is the request ignored? • Is a new approval request sent to the parent? • Or is the call handled idempotently by the system? ⸻ Delivery of approval results when the child app is not running If a parent approves or declines a SignificantAppUpdateTopic while the child app is not running: • Will the approval decision be delivered as a responses(for:) event on the next app launch? • Or is the app expected to persist approval state locally? ⸻ Persistence of approval state Is the approval decision for SignificantAppUpdateTopic persisted by the system at the OS level, or is the app responsible for storing approval state? Additionally, does the approval persist across: • app restarts? • app deletion and reinstallation? ⸻ Meaning of activeParentalControls.significantAppChangeApprovalRequired How is activeParentalControls.significantAppChangeApprovalRequired determined? • Is this value explicitly configured by a parent (for example via Screen Time)? • Or is it automatically determined by the system based on region, age, or regulatory requirements? ⸻ Relationship between significantAppChangeApprovalRequired and AgeRangeService When activeParentalControls contains significantAppChangeApprovalRequired, is it still expected that apps call AgeRangeService.requestAgeRange(...)? Or can the presence of this flag be treated as sufficient indication that the user is a minor for gating purposes? ⸻ Recommended interpretation of AgeRangeDeclaration Is the intended usage of AgeRangeDeclaration to handle each case individually, or is it acceptable and recommended to interpret the values as different trust levels (for example, self-declared vs. government ID or payment verified)? ⸻ Clarification on these points would help ensure that implementations of age assurance and parental approval flows are consistent with system behavior while meeting regulatory compliance requirements. Thank you for your guidance.
0
4
234
Dec ’25
Siri can’t place calls while device is locked
Hello, I’m developing a third-party VoIP app called Heyno and trying to support Siri-initiated calls so they behave like WhatsApp / FaceTime, especially from the lock screen. Target behavior From the locked device, the user says: “Hey Siri, call <contact> using Heyno” Expected result: • System CallKit audio-call UI appears. • No “continue in ” sheet, no forced unlock or foregrounding. • Our app handles the VoIP leg in the background via CXProviderDelegate. WhatsApp already does this with: “Hey Siri, call <contact> on WhatsApp” I’m trying to reproduce that behavior for Heyno using public APIs. I have followed the SiriKit + CallKit VoIP docs but cannot get a clean Siri → CallKit → app flow from the lock screen without either: Being forced into .continueInApp (unlock + foreground), or Hitting CallKit transaction errors when starting the call from the app in response to the intent. Current implementation Intents extension (INStartCallIntentHandling) • resolveContacts(for:with:) normalizes to E.164 and returns INPersonResolutionResult.success. • resolveDestinationType → .success(.normal). • resolveCallCapability → .success(.audioCall). Confirm / handle currently: func confirm(intent: INStartCallIntent, completion: @escaping (INStartCallIntentResponse) -> Void) { completion(INStartCallIntentResponse(code: .ready, userActivity: nil)) } func handle(intent: INStartCallIntent, completion: @escaping (INStartCallIntentResponse) -> Void) { completion(INStartCallIntentResponse(code: .ready, userActivity: nil)) } Earlier, I used .continueInApp with an NSUserActivity carrying the normalized number and metadata, but that always produced a “Continue in Heyno” sheet that requires unlock and foreground, which breaks the lock-screen Siri flow. App target – CallKit provider In the app I have CXProvider + CXProviderDelegate, which work correctly when calls are initiated from inside the app: func provider(_ provider: CXProvider, perform action: CXStartCallAction) { let handle = action.handle.value // Start VoIP / WebRTC / LiveKit / Asterisk call here provider.reportOutgoingCall(with: action.callUUID, startedConnectingAt: Date()) provider.reportOutgoingCall(with: action.callUUID, connectedAt: Date()) action.fulfill() } If I construct a CXStartCallAction and submit it via CXCallController.request(...) from the app, CallKit UI appears and our pipeline runs correctly. What I tried and what fails Starting CallKit from the Intents extension Calling CXCallController.request(...) directly from handle(intent:completion:) in the extension always yields: com.apple.CallKit.error.requesttransaction error 1 (unentitled) The extension does not have the CallKit entitlement, and the docs say not to initiate calls from the extension, so this path seems unsupported. Using .continueInApp + NSUserActivity Pattern: • handle(intent:) builds NSUserActivity (activityType = NSStringFromClass(INStartCallIntent.self), title = "Heyno Start Call", userInfo with E.164 handle, etc.). • Returns INStartCallIntentResponse(code: .continueInApp, userActivity: activity). • App receives the activity, then starts CallKit + VoIP. Functionally this works, but iOS always requires unlock + foreground (“Continue in Heyno”), which is not acceptable for a Siri lock-screen call. App group + Darwin notification (extension → app → CallKit) Experiment: • Extension writes the normalized number into an app-group UserDefaults. • Extension posts a Darwin notification. • App (if running) listens, reads the number, and initiates CXStartCallAction + VoIP. Observed: • Works only when the app is already running in the background; a killed app is not woken. • In some states I see CXErrorCodeRequestTransactionError.invalidAction (error 6) if I try to issue a CXStartCallAction while CallKit is already doing something as part of the Siri flow. • Siri sometimes replies “There was a problem with the app,” likely because CallKit rejects the transaction or sees duplicate/conflicting actions. My understanding so far • The Intents extension should resolve/confirm the intent but not start the call. • The source of truth for starting a call should be: Siri → CallKit → app’s CXProviderDelegate.provider(_:perform: CXStartCallAction) • The app then starts the VoIP leg, reports started/connected, and fulfills. Where I am stuck What is not clear is how Siri is supposed to route an INStartCallIntent into CallKit for a third-party VoIP app on a locked device without using .continueInApp. If my extension simply: • resolves the contact, • confirm → .ready, • handle → .ready (no NSUserActivity, no CallKit), I do not see a documented mechanism that causes: “Hey Siri, call <contact> using Heyno” on the lock screen to: • Present a CallKit audio call bound to Heyno, and • Deliver CXStartCallAction to my CXProviderDelegate while the app stays in the background. Questions For third-party VoIP apps today, is it recommended to implement INStartCallIntentHandling at all, or should we rely only on CallKit registration and Siri’s built-in support for “Call with ” (no SiriKit extension)? If an INStartCallIntentHandling extension is still the intended pattern: • Should confirm/handle simply return .ready and never start CallKit or set NSUserActivity? • In that case, is Siri expected to invoke CallKit on our behalf and create a CXStartCallAction targeting our provider, even when the device is locked and the app is not foreground? Is there any supported way for a Siri-triggered third-party VoIP call to start from the lock screen via CallKit without: • using .continueInApp (unlock + foreground), and • starting CallKit directly from the Intents extension (unentitled)? Is there any additional configuration, entitlement, provisioning profile flag, or Info.plist key required so that Siri can map “Call using Heyno” directly to our CallKit provider and background VoIP implementation? Current options: • .continueInApp + NSUserActivity → works, but always requires unlock + app UI. • Start CallKit from the extension → fails with “unentitled” and appears unsupported. • Extension → app-group + notification → app → CallKit → VoIP → fragile, with intermittent CXErrorCodeRequestTransactionError.invalidAction. • Remove the extension and hope Siri/CallKit auto-routes to our provider → unclear if this is supported for third-party VoIP apps or reserved for privileged apps. I would appreciate guidance on the intended architecture for this scenario, and whether the “Siri from lock screen → CallKit UI → background VoIP call” flow is achievable for an App Store VoIP app like Heyno using public APIs only.
0
0
332
Nov ’25
Can the App Clip banner for full app download be disabled?
Hello, I have a question about the default UI in an App Clip. I know that when App Clip launches, a system banner appears at the top for a few seconds, prompting the user to download the full app from the App Store. I'd like to confirm if this is the standard, default behavior for all App Clips. More importantly, is there any way to disable or hide this banner? We would prefer to manage the prompt to download the full app within our own UI. Thanks in advance for your help!
0
0
65
Nov ’25
How to stop today's instance of repeating alarms in AlarmKit without affecting future days?
I'm using the new AlarmKit framework to build a Swift app that lets users schedule multiple repeating alarms. The goal is to allow users to stop all alarms for today if they wake up early, but the alarms should still ring on their scheduled days in the future (for example, every Monday). What I tried: When the user chooses to stop alarms for today, I delete all alarms and re-add them. However, this doesn't work as expected. If today is Monday and I delete and re-add the alarm with .weekday = .monday, it still rings today. That means re-adding the alarm doesn't skip today's instance, even though it's repeating. What I want to achieve: Skip or suppress today's alarms when the user stops them manually Keep the same alarms active for their scheduled days in the future Questions: Is there a way in AlarmKit to prevent a repeating alarm from ringing today if it was just re-added or there are better alternatives to this problem? Is the only workaround to delay re-adding until after today’s alarms would have fired? What is the best approach to achieve this?
0
0
95
Aug ’25
Error Domain=FamilyControls.FamilyControlsError Code=2 "(null)"
An error was reported when requesting permissions on devices with iOS 16.2 16.3. It is not an emulator. Through the log records, the following Error message appears Error Domain=FamilyControls.FamilyControlsError Code=3 "(null)" Error Domain=FamilyControls.FamilyControlsError Code=4 "(null)" Error Domain=FamilyControls.FamilyControlsError Code=5 "(null)" func requestScreenTime() async -> Bool { do { try await AuthorizationCenter.shared.requestAuthorization(for: .individual) return AuthorizationCenter.shared.authorizationStatus == .approved } catch { print("\(error)") return false } }
1
0
99
May ’25
Universal link doesn't work after install right away
Hi! We are having a hard time with the universal link, help is appreciated! Thanks in advance! The universal link doesn't work after installation for some time. A user has to wait for from 5 to a couple of hours after the app is installed on the device. This has also affected App reviewers since we need the universal link to work for successful login. Each submission will receive a rejection of we cannot login and it will be approved until we kindly ask them to try again. I believe the JSON is delivered to devices by Apple's CDN system and the fact that it works on most devices most of the time should imply that we have a valid apple-app-site-association setup. So I am really confused about the wait time, which is giving us trouble with app review and a bad user experience
1
0
532
Apr ’25
__CRASHING_DUE_TO_PRIVACY_VIOLATION__ reason
Is there any way to find the reason for a CRASHING_DUE_TO_PRIVACY_VIOLATION from a crash report? It does not happen on my old iPad Air 2 and it does not happen on the simulators with the latest iOS. But it crashes always on newer real devices to which I have no access. The last app review for the AppStore also did not find it. I added some privacy strings by guessing and sent it via TestFlight but it doesn't change anything.
1
0
92
Apr ’25
FamilyActivityPicker not showing in iOS 26
Hi, after updating to iOS 26 I'm encountering an issue where the FamilyActivityPicker no longer opens. No errors are shown in the console, it just never shows up. It works fine pre iOS 26. I've never had any issues with the picker showing up until iOS 26. My latest update was rejected because of this issue, but I've changed nothing in the code. Is anyone else experiencing this?
1
0
204
Sep ’25
In Core Spotlight, it requires four consecutive characters to index the content. Only through title or displayName can the content be indexed.
In Core Spotlight, one can only index content by using title or displayName, and it requires four consecutive characters for indexing. These situations occurred in iOS 17 and 18. In iOS 16, I could not only index content by title or displayName, but also by keyword. Moreover, there was no restriction of requiring four consecutive characters. I could index my app content by simply inputting one character. Here is my code.https://github.com/kritto1/corespotlight-bug-test/tree/main @available(iOS 14, *) func addItemToIndex(_ item: QSpotlightItem) { let attributeSet = CSSearchableItemAttributeSet(contentType: .item) attributeSet.title = item.title attributeSet.displayName = item.title attributeSet.contentDescription = item.contentDescription attributeSet.keywords = item.keywords attributeSet.thumbnailData = item.thumbnailImage attributeSet.contactKeywords = item.keywords attributeSet.supportsNavigation = true let searchableItem = CSSearchableItem(uniqueIdentifier: item.id, domainIdentifier: "com.qunar.iphone.spotlight", attributeSet: attributeSet) searchableItem.expirationDate = .distantFuture CSSearchableIndex.default().indexSearchableItems([searchableItem]) { error in if let error = error { } else { } } } @available(iOS 14, *) func addToSpotlightIndex() { let spotlightHotel = QSpotlightItem( id: "corespotlight_1", title: "查询酒店住宿", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["酒店", "住宿"] ) addItemToIndex(spotlightHotel) let spotlightFlight = QSpotlightItem( id: "corespotlight_2", title: "查询和预订机票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "机票"] ) addItemToIndex(spotlightFlight) let spotlightSight = QSpotlightItem( id: "corespotlight_3", title: "查询预订门票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "门票"] ) addItemToIndex(spotlightSight) }
1
1
186
Apr ’25
Background shield application reliability
Hello! I am working on a screentime app and wondering if anyone has had success achieving reliable background shield application while using com.apple.ManagedSettingsUI.shield-configuration-service? I recently switched from com.apple.deviceactivity.shield-configuration (which worked reliably but isn't accepted by TestFlight) and have not found any consistency getting shields to apply while the app is backgrounded. I believe this is a known limitation of ManagedSettingsUI and want to know if there are successful workarounds or any specific patterns/timing that improve consistency?
1
0
198
Nov ’25
Automatic App Icon Style Change in iOS 26
After updating from iOS 18 to iOS 26, our app icon appears to have automatically received the new 'Liquid Glass' effect. We confirmed that this change occurred without us releasing a new app update. My questions are: Is this a system behavior where iOS 26 automatically applies the new icon style to existing apps? If so, is it possible for a developer to control or customize this effect? I am also wondering if there are any methods other than using Icon Composer.
1
0
227
Aug ’25
How to block large lists of domains (1000+) using Screen Time API?
I'm developing a parental control app that needs to block adult/18+ websites using the Screen Time API. I've run into scaling issues with 'ManagedSettings.webContent.blockedByFilter`. Environment: iOS 18.x, real device (iPhone) ManagedSettings framework Screen Time permissions granted Current Behavior: The Question: Commercial parental control apps successfully block tens of thousands of domains. What API or architecture should I be using to scale beyond 30-50 domains? Approaches I'm considering: Safari Content Blockers (limited to Safari only) Multiple ManagedSettingsStore instances Network Extension / DNS filtering A different Screen Time API approach What's the recommended way to block large domain lists (1000-60000+) across all apps and browsers? Any guidance appreciated! //33 domains - Works perfectly let blockedSites: Set<WebDomain> = [ WebDomain(domain: "example1.com"), WebDomain(domain: "example2.com"), // ... 31 more domains ] store.webContent.blockedByFilter = .specific(blockedSites) // All 33 domains blocked successfully // 101 domains - Complete failure (no domains blocked at all) let blockedSites: Set<WebDomain> = [ WebDomain(domain: "example1.com"), // ... 100 more domains ] store.webContent.blockedByFilter = .specific(blockedSites) // No errors thrown, but ZERO domains are blocked
1
0
137
Nov ’25
Unable to locate my stickers in message app after installed my app
My sticker app was rejected when I submitted it to App Store Connect. Reason: "We were unable to locate your stickers in message app after installed your app." When I checked on an iOS18 device, this was correct. However, my stickers is visible when I dragged the half-modal(like sheetPresentationController) part. I hope what I need to do to get the stickers to display initially. My code(Xcode16.2) class StickerViewController: MSStickerBrowserViewController { var stickers = [MSSticker]() override func viewDidLoad() { super.viewDidLoad() loadStickers() } override var stickerSize: MSStickerSize { get { return .small } } func loadStickers() { var imageSetPath = "en" for index in 1...20 { var strIndex = "" strIndex = "stmp" + String(index) + imageSetPath createSticker(assetLocation: "\(strIndex)", assetDescription: "\(strIndex)") } } func createSticker(assetLocation: String, assetDescription: String) { guard let path = Bundle.main.path(forResource: assetLocation, ofType: "png") else { return } let url = URL(fileURLWithPath: path) do { let sticker = try MSSticker(contentsOfFileURL: url, localizedDescription: assetDescription) stickers.append(sticker) } catch { print(error) } } } extension StickerViewController { override func numberOfStickers(in stickerBrowserView: MSStickerBrowserView) -> Int { return stickers.count } override func stickerBrowserView(_ stickerBrowserView: MSStickerBrowserView, stickerAt index: Int) -> MSSticker { return stickers[index] } }
1
0
113
May ’25
How to debug Quick Look Preview Extension
I'm facing the same problem as addressed in this discussion: After switching from legacy QLGenerators to Preview extensions on macOS I cannot debug the extensions' code in Xcode, anymore: I launch the app with the embedded appex from Xcode in debug mode. When trying to attach to the appex process the following error is reported: Code: 6 Failure Reason: Ensure “AppName Preview” is not already running, and matthias has permission to debug it. User Info: {... } System Information macOS Version 15.4.1 (Build 24E263) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-05-12T14:07:14+02:00 I'm using a standard user account (no admin) and might miss some obvious steps. Can someone detail the steps to debug a Preview (or Thumbnail) extension with Xcode 16? For legacy Quick Look plugins I was using "qlmanage", but that's not working on extensions. All the best, Matthias P.S.: Pardon me re-posting my reply as a separate thread, to increase visibility, but I'm quite desperate and couldn't find any solution on the web...
1
1
241
May ’25
Crashes with Rosetta after Sonoma update (crash reports).
Hello. We have an app and a custom dylib hat seems to be crashing only when Rosetta is involved. I believe it's the custom DYLIB that crashes. Here are some observations. The issue happens on the older 2022 built DYLIB (Intel only) And the newer DYLIB built (Universal) The universal DYLIB works fine natively on both Intel and M1 machines. It's only when we access it through an Intel only .app and it's running with Rosetta that we see the crash. The older Intel only .DYLIB worked perfectly with the same testing .app in versions before Sonoma, now they crash with the same .app, same build. Crash reports have been all over the place, they vary but repeat themselves. It has been a little confusing as to how to approach this issue and would appreciate any input that can help us understand what is going wrong and how to move forward. Crash reports are attached Crash Report 1 Crash Report 2 Crash Report 3 The crash occurs as SIGSEGV Version: 2.0 (1) Code Type: X86-64 (Translated) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-04-14 19:55:06.0103 +0200 OS Version: macOS 14.6 (23G5075b) Report Version: 12 Anonymous UUID: A08ECCFA-BF01-8636-7453-E4476586D3A8 Time Awake Since Boot: 3900 seconds System Integrity Protection: enabled Notes: PC register does not match crashing frame (0x0 vs 0x102920144) Crashed Thread: 10 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x000000011d052840 Exception Codes: 0x0000000000000001, 0x000000011d052840 Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11 Terminating Process: exc handler [3174] VM Region Info: 0x11d052840 is not in any region. Thank you so much for all the attention and effort.
1
0
148
Apr ’25
DeviceActivityMonitor extension intervalDidStart never called on iOS 26.3.1
Similar Issue to FB13556935: On iOS 26.3.1, deviceactivityd produces zero log output and never wakes a DeviceActivityMonitor extension at the scheduled time, even when the schedule is successfully registered. The extension's intervalDidStart(for:) method is never called. Steps to Reproduce: Create an app with a DeviceActivityMonitor extension subclass Add the com.apple.developer.family-controls entitlement to both the main app and extension targets Add a shared App Group entitlement to both targets In the main app, call: let center = DeviceActivityCenter() center.stopMonitoring([.myActivity]) let schedule = DeviceActivitySchedule( intervalStart: DateComponents(hour: 17, minute: 30), intervalEnd: DateComponents(hour: 17, minute: 45), repeats: true ) try center.startMonitoring(.myActivity, during: schedule) Verify registration succeeds: DeviceActivityCenter().activities.contains(.myActivity) returns true Background the app completely and wait for the intervalStart time (5:30 PM in this example) Expected Result: intervalDidStart(for:) is called in the extension process at 5:30 PM. ManagedSettings shields are applied without any user interaction. Actual Result: intervalDidStart(for:) is never called. No extension process is launched. Filtering Console.app for deviceactivityd on the device returns 0 messages — the daemon produces no logs whatsoever despite an active registered schedule. Shields are never applied. Additional Evidence: Third-party apps using DeviceActivity (e.g. Prayer Lock) successfully apply shields at scheduled times on the same device and OS version, confirming the framework is not universally broken Filtering Console.app for the app's bundle ID at the trigger time shows the main app process applying shields via a UNCalendarNotificationTrigger fallback — but no extension process activity DeviceActivityCenter().activities correctly lists the registered activity before and after the trigger time, confirming the schedule registration API is functional Environment: iOS 26.3.1 Physical device (required for FamilyControls) Development-signed build with com.apple.developer.family-controls entitlement provisioned App Group shared between main app and extension targets
Replies
0
Boosts
1
Views
75
Activity
3w
Apple Media Service T&C pop-up
I had published an App which App Clip is supported. I have receipt complaints from user where the user will keep showing the "Apple Media Services Terms and Conditions Have Changed" right after user click on the "Open" button in the App Clips. What I had tried: Let user switch the current logged in Apple Id region to one of our support region. Log out and log in with an Apple Id which had no issue.
Replies
0
Boosts
1
Views
99
Activity
Jan ’26
Clarification on AskCenter and Age Assurance APIs for Texas Regulatory Compliance
Hello, I’m currently reviewing and implementing age assurance and parental approval flows using AgeRangeService and PermissionKit (AskCenter) in the context of Texas regulatory compliance requirements. While the high-level APIs are clear, there are several technical aspects where the intended usage patterns are not fully explicit in the documentation. Clarification on these points would help ensure our implementation aligns with system expectations and regulatory obligations. ⸻ Querying the current approval state for SignificantAppUpdateTopic AskCenter.ask(...) returns Void, and AskCenter.responses(for:) provides an AsyncSequence of approval events. Is there an official or recommended way to determine whether a SignificantAppUpdateTopic has already been approved when the app launches, or is listening for future responses events the only supported mechanism? ⸻ Behavior of AskCenter.responses(for:) regarding past approvals When subscribing to AskCenter.responses(for:): • Does the stream replay previously recorded approval or decline decisions? • Or does it only emit events that occur after subscription? This affects whether the listener must be registered early in the app lifecycle. ⸻ Recommended lifecycle timing for registering a responses(for:) listener What is the intended or recommended time to register a responses(for:) listener? • At application launch • Immediately before calling ask(...) • When entering a specific gated feature Clarification on the expected lifecycle usage would be helpful. ⸻ Repeated calls to ask(...) after approval If AskCenter.ask(...) is called again for the same SignificantAppUpdateTopic after parental approval has already been granted: • Is the request ignored? • Is a new approval request sent to the parent? • Or is the call handled idempotently by the system? ⸻ Delivery of approval results when the child app is not running If a parent approves or declines a SignificantAppUpdateTopic while the child app is not running: • Will the approval decision be delivered as a responses(for:) event on the next app launch? • Or is the app expected to persist approval state locally? ⸻ Persistence of approval state Is the approval decision for SignificantAppUpdateTopic persisted by the system at the OS level, or is the app responsible for storing approval state? Additionally, does the approval persist across: • app restarts? • app deletion and reinstallation? ⸻ Meaning of activeParentalControls.significantAppChangeApprovalRequired How is activeParentalControls.significantAppChangeApprovalRequired determined? • Is this value explicitly configured by a parent (for example via Screen Time)? • Or is it automatically determined by the system based on region, age, or regulatory requirements? ⸻ Relationship between significantAppChangeApprovalRequired and AgeRangeService When activeParentalControls contains significantAppChangeApprovalRequired, is it still expected that apps call AgeRangeService.requestAgeRange(...)? Or can the presence of this flag be treated as sufficient indication that the user is a minor for gating purposes? ⸻ Recommended interpretation of AgeRangeDeclaration Is the intended usage of AgeRangeDeclaration to handle each case individually, or is it acceptable and recommended to interpret the values as different trust levels (for example, self-declared vs. government ID or payment verified)? ⸻ Clarification on these points would help ensure that implementations of age assurance and parental approval flows are consistent with system behavior while meeting regulatory compliance requirements. Thank you for your guidance.
Replies
0
Boosts
4
Views
234
Activity
Dec ’25
Siri can’t place calls while device is locked
Hello, I’m developing a third-party VoIP app called Heyno and trying to support Siri-initiated calls so they behave like WhatsApp / FaceTime, especially from the lock screen. Target behavior From the locked device, the user says: “Hey Siri, call <contact> using Heyno” Expected result: • System CallKit audio-call UI appears. • No “continue in ” sheet, no forced unlock or foregrounding. • Our app handles the VoIP leg in the background via CXProviderDelegate. WhatsApp already does this with: “Hey Siri, call <contact> on WhatsApp” I’m trying to reproduce that behavior for Heyno using public APIs. I have followed the SiriKit + CallKit VoIP docs but cannot get a clean Siri → CallKit → app flow from the lock screen without either: Being forced into .continueInApp (unlock + foreground), or Hitting CallKit transaction errors when starting the call from the app in response to the intent. Current implementation Intents extension (INStartCallIntentHandling) • resolveContacts(for:with:) normalizes to E.164 and returns INPersonResolutionResult.success. • resolveDestinationType → .success(.normal). • resolveCallCapability → .success(.audioCall). Confirm / handle currently: func confirm(intent: INStartCallIntent, completion: @escaping (INStartCallIntentResponse) -> Void) { completion(INStartCallIntentResponse(code: .ready, userActivity: nil)) } func handle(intent: INStartCallIntent, completion: @escaping (INStartCallIntentResponse) -> Void) { completion(INStartCallIntentResponse(code: .ready, userActivity: nil)) } Earlier, I used .continueInApp with an NSUserActivity carrying the normalized number and metadata, but that always produced a “Continue in Heyno” sheet that requires unlock and foreground, which breaks the lock-screen Siri flow. App target – CallKit provider In the app I have CXProvider + CXProviderDelegate, which work correctly when calls are initiated from inside the app: func provider(_ provider: CXProvider, perform action: CXStartCallAction) { let handle = action.handle.value // Start VoIP / WebRTC / LiveKit / Asterisk call here provider.reportOutgoingCall(with: action.callUUID, startedConnectingAt: Date()) provider.reportOutgoingCall(with: action.callUUID, connectedAt: Date()) action.fulfill() } If I construct a CXStartCallAction and submit it via CXCallController.request(...) from the app, CallKit UI appears and our pipeline runs correctly. What I tried and what fails Starting CallKit from the Intents extension Calling CXCallController.request(...) directly from handle(intent:completion:) in the extension always yields: com.apple.CallKit.error.requesttransaction error 1 (unentitled) The extension does not have the CallKit entitlement, and the docs say not to initiate calls from the extension, so this path seems unsupported. Using .continueInApp + NSUserActivity Pattern: • handle(intent:) builds NSUserActivity (activityType = NSStringFromClass(INStartCallIntent.self), title = "Heyno Start Call", userInfo with E.164 handle, etc.). • Returns INStartCallIntentResponse(code: .continueInApp, userActivity: activity). • App receives the activity, then starts CallKit + VoIP. Functionally this works, but iOS always requires unlock + foreground (“Continue in Heyno”), which is not acceptable for a Siri lock-screen call. App group + Darwin notification (extension → app → CallKit) Experiment: • Extension writes the normalized number into an app-group UserDefaults. • Extension posts a Darwin notification. • App (if running) listens, reads the number, and initiates CXStartCallAction + VoIP. Observed: • Works only when the app is already running in the background; a killed app is not woken. • In some states I see CXErrorCodeRequestTransactionError.invalidAction (error 6) if I try to issue a CXStartCallAction while CallKit is already doing something as part of the Siri flow. • Siri sometimes replies “There was a problem with the app,” likely because CallKit rejects the transaction or sees duplicate/conflicting actions. My understanding so far • The Intents extension should resolve/confirm the intent but not start the call. • The source of truth for starting a call should be: Siri → CallKit → app’s CXProviderDelegate.provider(_:perform: CXStartCallAction) • The app then starts the VoIP leg, reports started/connected, and fulfills. Where I am stuck What is not clear is how Siri is supposed to route an INStartCallIntent into CallKit for a third-party VoIP app on a locked device without using .continueInApp. If my extension simply: • resolves the contact, • confirm → .ready, • handle → .ready (no NSUserActivity, no CallKit), I do not see a documented mechanism that causes: “Hey Siri, call <contact> using Heyno” on the lock screen to: • Present a CallKit audio call bound to Heyno, and • Deliver CXStartCallAction to my CXProviderDelegate while the app stays in the background. Questions For third-party VoIP apps today, is it recommended to implement INStartCallIntentHandling at all, or should we rely only on CallKit registration and Siri’s built-in support for “Call with ” (no SiriKit extension)? If an INStartCallIntentHandling extension is still the intended pattern: • Should confirm/handle simply return .ready and never start CallKit or set NSUserActivity? • In that case, is Siri expected to invoke CallKit on our behalf and create a CXStartCallAction targeting our provider, even when the device is locked and the app is not foreground? Is there any supported way for a Siri-triggered third-party VoIP call to start from the lock screen via CallKit without: • using .continueInApp (unlock + foreground), and • starting CallKit directly from the Intents extension (unentitled)? Is there any additional configuration, entitlement, provisioning profile flag, or Info.plist key required so that Siri can map “Call using Heyno” directly to our CallKit provider and background VoIP implementation? Current options: • .continueInApp + NSUserActivity → works, but always requires unlock + app UI. • Start CallKit from the extension → fails with “unentitled” and appears unsupported. • Extension → app-group + notification → app → CallKit → VoIP → fragile, with intermittent CXErrorCodeRequestTransactionError.invalidAction. • Remove the extension and hope Siri/CallKit auto-routes to our provider → unclear if this is supported for third-party VoIP apps or reserved for privileged apps. I would appreciate guidance on the intended architecture for this scenario, and whether the “Siri from lock screen → CallKit UI → background VoIP call” flow is achievable for an App Store VoIP app like Heyno using public APIs only.
Replies
0
Boosts
0
Views
332
Activity
Nov ’25
Can the App Clip banner for full app download be disabled?
Hello, I have a question about the default UI in an App Clip. I know that when App Clip launches, a system banner appears at the top for a few seconds, prompting the user to download the full app from the App Store. I'd like to confirm if this is the standard, default behavior for all App Clips. More importantly, is there any way to disable or hide this banner? We would prefer to manage the prompt to download the full app within our own UI. Thanks in advance for your help!
Replies
0
Boosts
0
Views
65
Activity
Nov ’25
How to stop today's instance of repeating alarms in AlarmKit without affecting future days?
I'm using the new AlarmKit framework to build a Swift app that lets users schedule multiple repeating alarms. The goal is to allow users to stop all alarms for today if they wake up early, but the alarms should still ring on their scheduled days in the future (for example, every Monday). What I tried: When the user chooses to stop alarms for today, I delete all alarms and re-add them. However, this doesn't work as expected. If today is Monday and I delete and re-add the alarm with .weekday = .monday, it still rings today. That means re-adding the alarm doesn't skip today's instance, even though it's repeating. What I want to achieve: Skip or suppress today's alarms when the user stops them manually Keep the same alarms active for their scheduled days in the future Questions: Is there a way in AlarmKit to prevent a repeating alarm from ringing today if it was just re-added or there are better alternatives to this problem? Is the only workaround to delay re-adding until after today’s alarms would have fired? What is the best approach to achieve this?
Replies
0
Boosts
0
Views
95
Activity
Aug ’25
Screen time api on Mac?
Is there any way to use the screen time API on Mac?
Replies
0
Boosts
0
Views
100
Activity
Jun ’25
Error Domain=FamilyControls.FamilyControlsError Code=2 "(null)"
An error was reported when requesting permissions on devices with iOS 16.2 16.3. It is not an emulator. Through the log records, the following Error message appears Error Domain=FamilyControls.FamilyControlsError Code=3 "(null)" Error Domain=FamilyControls.FamilyControlsError Code=4 "(null)" Error Domain=FamilyControls.FamilyControlsError Code=5 "(null)" func requestScreenTime() async -> Bool { do { try await AuthorizationCenter.shared.requestAuthorization(for: .individual) return AuthorizationCenter.shared.authorizationStatus == .approved } catch { print("\(error)") return false } }
Replies
1
Boosts
0
Views
99
Activity
May ’25
Universal link doesn't work after install right away
Hi! We are having a hard time with the universal link, help is appreciated! Thanks in advance! The universal link doesn't work after installation for some time. A user has to wait for from 5 to a couple of hours after the app is installed on the device. This has also affected App reviewers since we need the universal link to work for successful login. Each submission will receive a rejection of we cannot login and it will be approved until we kindly ask them to try again. I believe the JSON is delivered to devices by Apple's CDN system and the fact that it works on most devices most of the time should imply that we have a valid apple-app-site-association setup. So I am really confused about the wait time, which is giving us trouble with app review and a bad user experience
Replies
1
Boosts
0
Views
532
Activity
Apr ’25
Open In is not working even after hosting AASA
I have hosted my AASA file in https://powerbrowser.app/.well-known/apple-app-site-association in signed format as per documentation. I still can not see open in app button when open a link by long press. By the way i have activated 'Associated Domains' and put proper entitlements as per documantation.
Replies
1
Boosts
0
Views
118
Activity
Jun ’25
__CRASHING_DUE_TO_PRIVACY_VIOLATION__ reason
Is there any way to find the reason for a CRASHING_DUE_TO_PRIVACY_VIOLATION from a crash report? It does not happen on my old iPad Air 2 and it does not happen on the simulators with the latest iOS. But it crashes always on newer real devices to which I have no access. The last app review for the AppStore also did not find it. I added some privacy strings by guessing and sent it via TestFlight but it doesn't change anything.
Replies
1
Boosts
0
Views
92
Activity
Apr ’25
FamilyActivityPicker not showing in iOS 26
Hi, after updating to iOS 26 I'm encountering an issue where the FamilyActivityPicker no longer opens. No errors are shown in the console, it just never shows up. It works fine pre iOS 26. I've never had any issues with the picker showing up until iOS 26. My latest update was rejected because of this issue, but I've changed nothing in the code. Is anyone else experiencing this?
Replies
1
Boosts
0
Views
204
Activity
Sep ’25
In Core Spotlight, it requires four consecutive characters to index the content. Only through title or displayName can the content be indexed.
In Core Spotlight, one can only index content by using title or displayName, and it requires four consecutive characters for indexing. These situations occurred in iOS 17 and 18. In iOS 16, I could not only index content by title or displayName, but also by keyword. Moreover, there was no restriction of requiring four consecutive characters. I could index my app content by simply inputting one character. Here is my code.https://github.com/kritto1/corespotlight-bug-test/tree/main @available(iOS 14, *) func addItemToIndex(_ item: QSpotlightItem) { let attributeSet = CSSearchableItemAttributeSet(contentType: .item) attributeSet.title = item.title attributeSet.displayName = item.title attributeSet.contentDescription = item.contentDescription attributeSet.keywords = item.keywords attributeSet.thumbnailData = item.thumbnailImage attributeSet.contactKeywords = item.keywords attributeSet.supportsNavigation = true let searchableItem = CSSearchableItem(uniqueIdentifier: item.id, domainIdentifier: "com.qunar.iphone.spotlight", attributeSet: attributeSet) searchableItem.expirationDate = .distantFuture CSSearchableIndex.default().indexSearchableItems([searchableItem]) { error in if let error = error { } else { } } } @available(iOS 14, *) func addToSpotlightIndex() { let spotlightHotel = QSpotlightItem( id: "corespotlight_1", title: "查询酒店住宿", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["酒店", "住宿"] ) addItemToIndex(spotlightHotel) let spotlightFlight = QSpotlightItem( id: "corespotlight_2", title: "查询和预订机票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "机票"] ) addItemToIndex(spotlightFlight) let spotlightSight = QSpotlightItem( id: "corespotlight_3", title: "查询预订门票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "门票"] ) addItemToIndex(spotlightSight) }
Replies
1
Boosts
1
Views
186
Activity
Apr ’25
How to use wifi-aware to connect third-party device with iPhone?
How to use wifi-aware to connect third-party device with iPhone? The document mention that "Your app can use the Wi-Fi Aware framework to connect with Wi-Fi Aware certified accessories", but How to be Wi-Fi Aware certified accessories? it there any detail?
Replies
1
Boosts
0
Views
179
Activity
Jun ’25
Background shield application reliability
Hello! I am working on a screentime app and wondering if anyone has had success achieving reliable background shield application while using com.apple.ManagedSettingsUI.shield-configuration-service? I recently switched from com.apple.deviceactivity.shield-configuration (which worked reliably but isn't accepted by TestFlight) and have not found any consistency getting shields to apply while the app is backgrounded. I believe this is a known limitation of ManagedSettingsUI and want to know if there are successful workarounds or any specific patterns/timing that improve consistency?
Replies
1
Boosts
0
Views
198
Activity
Nov ’25
Automatic App Icon Style Change in iOS 26
After updating from iOS 18 to iOS 26, our app icon appears to have automatically received the new 'Liquid Glass' effect. We confirmed that this change occurred without us releasing a new app update. My questions are: Is this a system behavior where iOS 26 automatically applies the new icon style to existing apps? If so, is it possible for a developer to control or customize this effect? I am also wondering if there are any methods other than using Icon Composer.
Replies
1
Boosts
0
Views
227
Activity
Aug ’25
How to block large lists of domains (1000+) using Screen Time API?
I'm developing a parental control app that needs to block adult/18+ websites using the Screen Time API. I've run into scaling issues with 'ManagedSettings.webContent.blockedByFilter`. Environment: iOS 18.x, real device (iPhone) ManagedSettings framework Screen Time permissions granted Current Behavior: The Question: Commercial parental control apps successfully block tens of thousands of domains. What API or architecture should I be using to scale beyond 30-50 domains? Approaches I'm considering: Safari Content Blockers (limited to Safari only) Multiple ManagedSettingsStore instances Network Extension / DNS filtering A different Screen Time API approach What's the recommended way to block large domain lists (1000-60000+) across all apps and browsers? Any guidance appreciated! //33 domains - Works perfectly let blockedSites: Set<WebDomain> = [ WebDomain(domain: "example1.com"), WebDomain(domain: "example2.com"), // ... 31 more domains ] store.webContent.blockedByFilter = .specific(blockedSites) // All 33 domains blocked successfully // 101 domains - Complete failure (no domains blocked at all) let blockedSites: Set<WebDomain> = [ WebDomain(domain: "example1.com"), // ... 100 more domains ] store.webContent.blockedByFilter = .specific(blockedSites) // No errors thrown, but ZERO domains are blocked
Replies
1
Boosts
0
Views
137
Activity
Nov ’25
Unable to locate my stickers in message app after installed my app
My sticker app was rejected when I submitted it to App Store Connect. Reason: "We were unable to locate your stickers in message app after installed your app." When I checked on an iOS18 device, this was correct. However, my stickers is visible when I dragged the half-modal(like sheetPresentationController) part. I hope what I need to do to get the stickers to display initially. My code(Xcode16.2) class StickerViewController: MSStickerBrowserViewController { var stickers = [MSSticker]() override func viewDidLoad() { super.viewDidLoad() loadStickers() } override var stickerSize: MSStickerSize { get { return .small } } func loadStickers() { var imageSetPath = "en" for index in 1...20 { var strIndex = "" strIndex = "stmp" + String(index) + imageSetPath createSticker(assetLocation: "\(strIndex)", assetDescription: "\(strIndex)") } } func createSticker(assetLocation: String, assetDescription: String) { guard let path = Bundle.main.path(forResource: assetLocation, ofType: "png") else { return } let url = URL(fileURLWithPath: path) do { let sticker = try MSSticker(contentsOfFileURL: url, localizedDescription: assetDescription) stickers.append(sticker) } catch { print(error) } } } extension StickerViewController { override func numberOfStickers(in stickerBrowserView: MSStickerBrowserView) -> Int { return stickers.count } override func stickerBrowserView(_ stickerBrowserView: MSStickerBrowserView, stickerAt index: Int) -> MSSticker { return stickers[index] } }
Replies
1
Boosts
0
Views
113
Activity
May ’25
How to debug Quick Look Preview Extension
I'm facing the same problem as addressed in this discussion: After switching from legacy QLGenerators to Preview extensions on macOS I cannot debug the extensions' code in Xcode, anymore: I launch the app with the embedded appex from Xcode in debug mode. When trying to attach to the appex process the following error is reported: Code: 6 Failure Reason: Ensure “AppName Preview” is not already running, and matthias has permission to debug it. User Info: {... } System Information macOS Version 15.4.1 (Build 24E263) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-05-12T14:07:14+02:00 I'm using a standard user account (no admin) and might miss some obvious steps. Can someone detail the steps to debug a Preview (or Thumbnail) extension with Xcode 16? For legacy Quick Look plugins I was using "qlmanage", but that's not working on extensions. All the best, Matthias P.S.: Pardon me re-posting my reply as a separate thread, to increase visibility, but I'm quite desperate and couldn't find any solution on the web...
Replies
1
Boosts
1
Views
241
Activity
May ’25
Crashes with Rosetta after Sonoma update (crash reports).
Hello. We have an app and a custom dylib hat seems to be crashing only when Rosetta is involved. I believe it's the custom DYLIB that crashes. Here are some observations. The issue happens on the older 2022 built DYLIB (Intel only) And the newer DYLIB built (Universal) The universal DYLIB works fine natively on both Intel and M1 machines. It's only when we access it through an Intel only .app and it's running with Rosetta that we see the crash. The older Intel only .DYLIB worked perfectly with the same testing .app in versions before Sonoma, now they crash with the same .app, same build. Crash reports have been all over the place, they vary but repeat themselves. It has been a little confusing as to how to approach this issue and would appreciate any input that can help us understand what is going wrong and how to move forward. Crash reports are attached Crash Report 1 Crash Report 2 Crash Report 3 The crash occurs as SIGSEGV Version: 2.0 (1) Code Type: X86-64 (Translated) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-04-14 19:55:06.0103 +0200 OS Version: macOS 14.6 (23G5075b) Report Version: 12 Anonymous UUID: A08ECCFA-BF01-8636-7453-E4476586D3A8 Time Awake Since Boot: 3900 seconds System Integrity Protection: enabled Notes: PC register does not match crashing frame (0x0 vs 0x102920144) Crashed Thread: 10 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x000000011d052840 Exception Codes: 0x0000000000000001, 0x000000011d052840 Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11 Terminating Process: exc handler [3174] VM Region Info: 0x11d052840 is not in any region. Thank you so much for all the attention and effort.
Replies
1
Boosts
0
Views
148
Activity
Apr ’25