We are experiencing an issue where Apple’s CDN is not fetching the updated apple-app-site-association (AASA) file correctly for our domain. Domain - app.myloft-stage.com AASA File Locations (Both Return Correct JSON): https://app.myloft-stage.com/.well-known/apple-app-site-association https://app.myloft-stage.com/apple-app-site-association Both endpoints: Return HTTP 200 Return valid JSON Content-Type: application/json No redirects Valid SSL certificate JSON validated and correctly formatted Apple CDN URL - https://app-site-association.cdn-apple.com/a/v1/app.myloft-stage.com Error Returned by Apple CDN - {"cause":"invalid character '\u003c' looking for beginning of value"} This error indicates that Apple CDN is receiving HTML content (starting with <) instead of JSON, even though the origin server returns proper JSON. Observations : Direct access to AASA file returns correct JSON. Apple CDN appears to be caching an older or incorrect response. The CDN response does not match the current server response. Universal Links fail due to this incorrect AASA retrieval.

Dear Apple Support Team, Thank you for your continued support. I would like to inquire about the behavior of CallKit. Our company provides an office PBX extension phone application (iPhone app). When the iPhone is placed into sleep mode (screen off) and our app receives an incoming call, the following sequence sometimes results in an audio playback panel appearing at the bottom of the lock screen for a few seconds after the call ends(See attachment file for detail). Sequence to reproduce the issue: Put the iPhone into sleep mode (screen off). Receive an incoming call to our extension phone app. CallKit incoming call screen appears. Answer the call. Conduct the call. End the call from the peer. iOS versions with confirmed behavior: iOS 26.0: Not observed. iOS 26.2: Observed. iOS 26.3: Not observed. This behavior does not affect the call functionality itself; however, some users report that the temporary appearance of the audio playback panel feels unusual. If there is any known reason for this behavior or any recommended workaround, we would greatly appreciate your guidance. Additionally, if this is a known issue that was addressed in iOS 26.3, we would appreciate any information you can provide regarding that as well. Thank you very much for your assistance.

I am getting bug reports from users that occasionally the AlarmKit alarms scheduled by my app are going off exactly at midnight. In my app, users can set recurring alarms for sunrise/sunset etc. I implement this as fixed schedule alarms over the next 2-3 days with correct dates pre-computed at schedule time. I have a background task which is scheduled to run at noon every day to update the alarms for the next 2-3 days. Are there any limitations to the fixed schedule which might be causing this unintended behavior of going off at midnight?

Hi, Submitted Family Controls entitlement request a month ago for my main focus app, got approved within a day. Submitted 3 more requests for my extensions, and it has been 16 days without any word. Saw advice to file a code-level support with DTS in this similar forum: https://aninterestingwebsite.com/forums/thread/812934 Is there anything else I can do before filing a code-level support? Any extra info to provide? If not, can a DTS engineer please refer me for the code-level support? Thanks!

Hello, Our team submitted a request for Family Controls entitlements for our main app and four related extensions. It has now been a little over two weeks since submission, and the request is still pending review. We wanted to check if there are any recommended steps we can take on our end to help move the process forward. Any guidance or tips from anyone who have recently gone through this process would be greatly appreciated. Thank you.

This is a question as I don't found any related documents or posts anywhere about this. Does anyone know how and when will this "pop up" shown?

In iOS 18, when a contact with multiple phone numbers called, the system clearly indicated which specific number was used—often by highlighting it in red for missed calls or tagging it as 'recent.' However, in iOS 26, this distinction is missing, and there is no way to determine which of the contact's numbers the call originated from.

Hello. We are facing very silent and hardly replicable issue. All UserDefaults.standard data the application saved and was using to determine the state of app is lost and app behaves as if it was freshly installed. The issue always occurs only if we leave app on background for long time or if we manually swipe the app from the background apps. In case we swipe, this issue can occur in minutes, hours or up to 2 days by our latest testing. One important factor is that the app was developed using iOS18 in which issue never occured. Next it was being tested on iOS26 and it did everytime. Any currently available version of iOS26 reported this issue, all the way up to 26.2.1 (23C71). Our application is going through major upgrade of its whole lifecycle and services so it is possible this issue is caused by a bug in development as the production version does not report this issue neither on iOS26 of any version. The following list contains how we tried to fix this issue but none of which helped. App prewarming in the background (postpone all initialization including searching UserDefaults.standard for when isProtectedDataAvailable) Calling UserDefaults.standard.synchronize() everytime after saving data despite it is not recomended Built app using different SDK's (tested on iOS18 and iOS26 SDK) Distributed the app from local machine aswell as on TestFlight itself We searched through currently opened and closed issues for third-party libraries app uses regarding 'iOS26' and 'UserDefaults', especially those who were added recently with no success. The structure using which we save data into UserDefaults.standard did not change, we have only added few more settings to save through the lifecycle of the app after update. We estimate the overall increase is merely 30% more of what it used to be in previous version. Any ideas are much appreciated. We are considering to use different or fully custom ways to store app's settings.

Currently, I have implemented Unwanted Communication Extension, But I wanted to send the reported call or message to my backed server. How can I achieve this and can I send message body to the server ?

Do we need to take approval for any entitlement for the extension Unwanted Communication because currently I do not see my app in the Settings under SMS/Call Reporting extensions.

Hi Team, We've been developing our application with the fairly new AlarmKit. We are using the stopIntent to run some quick logic when the user stops the alarms. The stopIntent is a LiveActivityIntent and works well when the user presses the button the dismiss button on the alarm. But unfortunately we've realized some interesting behavior in the following two cases: In case the alarm fires while the user has unlocked their screen and they do things on the screen, the alarm is dismissed (and stopped), but the stopIntent is not executed. In case the alarm fires while the user has unlocked their screen and they swipe up the Live Activity banner, the alarm is also dismissed (and stopped), but again the stopIntent is not executed. I've tried to look up for some information, but could not find anything meaningful for this specific case. We're wondering if that is something that is planned to get fixed in the future, or maybe there's a workaround. We've tried also alternative - listening to alarm updates via the AlarmManager, but we are not very eager to create listener task for it, also the alarm state does not provide updates for dismissed. Thanks!

Hi! I'm building a Screen Time management app using FamilyControls and ManagedSettings. When a user taps the primary button on a ShieldActionExtension, I need to open my main app to guide them through an intervention exercise. Other approved App Store apps like Jomo - Screen Time Blocker do exactly this: tapping their shield's primary button opens the main Jomo app directly. Screen recording: https://drive.google.com/file/d/15yubtTdTkFskGCIaAw_HGB57-boHPl3a/view?usp=sharing I've tried: URL schemes (UIApplication.shared.open() unavailable in extensions) Universal links Local notifications (works, but adds an extra tap) NSUserActivity Is there a supported API I'm missing? Or another accepted solution? Any guidance is appreciated.

As the title suggests, I have a class marked with @Observable. Within the class I have multiple var's. When one of my var's changes (formation), I want to run an updateOrCreateContent(). I had thought I could just do this with a bit of combine, but I'm struggling to get it working... The code below has a compile error at $formation When I mark formation @Published, it generates a different compile error: "Invalid redeclaration of synthesized property '_formation'" any help appreciated thanks class LayoutModel { var players: [Player] = [] var formation: Formation = .f433 var cancellables = Set<AnyCancellable>() init(players: [Player], formation: Formation) { self.players = players self.formation = formation updateOrCreateContent() $formation.sink(receiveValue: { _ in self.updateOrCreateContent() }) .store(in: &cancellables) }

Hello, I’m using the Screen Time API / Family Controls in my iOS app Sobre and I’m having an issue submitting a new build to TestFlight. My app setup is as follows: Main app ID: com.balthazar.sobre App extensions: Device Activity Monitor: com.balthazar.sobre.deviceactivitymonitor Shield Configuration: com.balthazar.sobre.shieldconfiguration Shield Action: com.balthazar.sobre.shieldaction On the Apple Developer portal: Family Controls (Distribution) is enabled for: the main app ID com.balthazar.sobre and all 3 extension App IDs above. App Groups are also configured for the app and the extensions. New App Store provisioning profiles have been generated for the app and all 3 extensions and are used in the latest build. When I submit the build through App Store Connect (via Fastlane / EAS), validation fails only for the Shield Action extension with this error: Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.ManagedSettingsUI.shield-action-service, in the Info.plist of “Sobre.app/PlugIns/ShieldActionExtension.appex” is invalid. DeviceActivityMonitorExtension and ShieldConfigurationExtension are accepted without any issue. My questions: What is the correct expected value for NSExtensionPointIdentifier for a Shield Action extension using the Screen Time / ManagedSettings APIs? Are there any additional entitlements or capabilities (for example, related to Managed Settings) that must be explicitly enabled for the app or the Shield Action extension in order for this extension point to be accepted by App Store Connect? Given that Family Controls (Distribution) is already granted for the main app and all extensions, is there anything else that needs to be requested or configured on my account or App IDs to use a Shield Action extension? My goal is to use Screen Time / Family Controls properly to block distracting apps and present a custom Shield UI + actions for my users, while respecting all Apple policies. Thank you in advance for your help and guidance

Summary I'm using Background Assets to download Apple-hosted Asset Packs(downloadPolicy = onDemand). The first download cancellation succeeds, but on the second and subsequent downloads, progress.cancel() fails to work and the download completes to the end. Environment iOS 26.0 – 26.3 RC (all produce the same result) Xcode Version 26.2 (17C52) Using Apple-hosted Asset Packs Steps to Reproduce Start downloading an Asset Pack Call progress.cancel() during download → Succeeds Start downloading the same Asset Pack again Call progress.cancel() during download → Fails (download completes to the end) Observed Error Logs After 1st cancellation: A download with the ID "X-XXXXXXXX-XXX" failed: Error Domain=NSURLErrorDomain Code=-999 "cancelled" ↑ This is expected (cancellation succeeded) The fact that version 0 of the asset pack with the ID "X-XXXXXX-XXX" finished being downloaded couldn't be reported: Error Domain=NSCocoaErrorDomain Code=3851 "Property list invalid for format: 200 (property lists cannot contain objects of type 'CFError')" ↑ Problem: Unable to serialize CFError to plist 2nd cancellation attempt: The download with the ID "X-XXXXXX-XXX" couldn't be canceled: Error Domain=BAErrorDomain Code=113 "The requested download operation failed because the download object did not exist." ↑ The download object we're trying to cancel supposedly doesn't exist Implementation Code // Cancel implementation func cancel(tag: String) async { let statusUpdates = AssetPackManager.shared.statusUpdates(forAssetPackWithID: tag) for await statusUpdate in statusUpdates { if case .downloading(_, let progress) = statusUpdate, progress.isCancellable { progress.cancel() } } } Analysis It appears that when the first cancellation occurs, the system internally tries to save the cancellation state to a plist, but fails to serialize the CFError object. This seems to cause an inconsistent internal state, preventing the system from correctly recognizing the download object on subsequent downloads. Questions Is there a workaround? Is there a planned fix for a future iOS version?

App is repeatedly rejected under Guideline 2.5.1 for referencing the private API:_SecCertificateIsValid Reported custom framework CommonLibrary.framework. The SDK is written in Objective-C and uses only public Security APIs. It does not use any deprecated APIs. We have verified the framework binary using nm, otool, and strings, and _SecCertificateIsValid does not appear in exported or hidden symbols. Bitcode is disabled, dead-code stripping is enabled, and the Release build uses -Os. Despite this, App Store Connect continues to detect _SecCertificateIsValid. We have attached herewith screenshots of our analysis for the reference. Can Apple’s server-side analysis or Security.framework internals still surface _SecCertificateIsValid? Is there a recommended way for SDK authors to prevent this symbol from being flagged?

Hello Apple Developer Support Team, We are developing an iOS iPhone application and would like clarification on whether Apple provides any APIs or system-level support to implement parental approval workflows aligned with certain regional regulatory requirements (for example, Texas, Utah, and Louisiana). Our intended use cases are outlined below: Initial Approval (App Download Stage) We understand that, in some situations, when a minor attempts to download an app from the App Store on iPhone, iOS may require approval through Family Sharing / Ask to Buy. We would like to confirm: • Whether there is any developer-accessible API that allows an iPhone app to detect if installation was approved via parental consent. • Whether apps can receive any callback, status indicator, or system signal confirming parental approval or rejection. • Whether the Declared Age Range API or any related framework provides access to parental approval or age verification signals. Ongoing Approval for Significant Changes For regulatory compliance, we may need to request parental re-approval when introducing significant application updates (for example, adding chat functionality, social interaction features, or modifying data collection practices). We would like clarification on: • Whether iOS provides any mechanism or API that allows iPhone apps to trigger or request parental re-approval after the application has already been installed. • Whether Apple provides any built-in workflows, system prompts, or entitlement-based approaches that support this type of re-approval process. In-App Handling of Parent Approval Requirements If our backend determines that a minor user requires parental approval before continuing to use certain app features, we would like to understand: • Whether Apple provides any APIs, SDKs, or recommended frameworks that allow initiating or facilitating parental authorization from within the iPhone app. • Whether there are any callbacks, permission states, entitlement checks, or system notifications that developers can use to determine and track parental consent status. If any such capabilities exist, we would greatly appreciate links to official documentation, technical guidance, or sample implementations demonstrating how approval status can be retrieved and handled in an iOS iPhone application. Also from which iOS version this capabilities will work & how to handle lower iOS version which is not supporting. Additionally, if Apple recommends alternative compliance approaches using existing frameworks such as Family Sharing, Screen Time APIs, or Declared Age Range, we would appreciate guidance on best practices for implementation. Also, could you please clarify the minimum iOS version that supports these capabilities? We would also appreciate recommendations on how developers should manage or implement fallback handling for devices running lower iOS versions where these capabilities are not supported. Thank you for your assistance and guidance in ensuring compliance with Apple platform policies and regional regulatory requirements. Kind regards

I am building an app for iOS and MacCatalyst that indexes files by storing their local paths. Because the app relies on the file remaining at its original location, I only want to accept items that can be opened in place. I am struggling to determine if an item is "Open In Place" compatible early in the drag-and-drop lifecycle. Specifically: In dropInteraction(_:canHandle:) and dropInteraction(_:sessionDidUpdate:), calling itemProvider.registeredTypeIdentifiers(fileOptions: [.openInPlace]) returns an empty array. Only once the drop is actually committed in dropInteraction(_:performDrop:) does that same call return the expected type identifiers. This creates a poor user experience. I want to validate the "In Place" capability at the very start of the session so the drop target only activates for valid files. If an item is ephemeral (like a dragged photo from the Photos app or a temporary export), the drop zone should not react at all. How can I reliably detect if an NSItemProvider supports .openInPlace before the performDrop delegate method is called?

When Live Caller ID first came out I experimented with it and got it working using the Example PIR database. All my links from that time are now out of date and no longer work, however I seem to have found where the PIR database example and documentation has moved to (https://swiftpackageindex.com/apple/pir-service-example/main/documentation/pirservice/testinginstructionslivecalleridlookup) But what I can't find is an exact definition of the the logo size/max size/dimensions/format should be. My memory from that time is that it was very pernickety, and if things weren't exactly right, the logo wasn't displayed. I can remember the format had to be HEIC to get it to work. Looking through the documentation however, I can't see exact requirements specified. My question is - for the Live Caller ID logo what are the exact image requirements, and where are they documented?